Skip to main content
Contributor I
Apr 20, 2021 5:10 PM UTC
Answered

Impossible to connect my SONOS ROAM in Bluetooth

Hello,

 

as I just received my SONOS ROAM I have tried many times today to get it connected in Bluetooth by following the procedure as described in that link.

https://support.sonos.com/s/article/4989?language=fr

So I kept pressing the button at the back but the blue light never went on and as a consequence the product had been left undiscovered for my mobile phone.

Is there anyone who encountered the same issue & what should I do to get it solve.

Thanks for your help

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
shfawaz
shfawazAnswer
Prominent Collaborator I
Apr 22, 2021 9:07 PM UTC

Actually, I never got the blue pairing led to flash, always stayed white. 

 

UPDATE: Found that my system had an update available, installed that, and I finally was able to pair my iPhone. 

Thanks!

"I alway listen to my music intravenously"

114 replies

Ken_Griffiths
Jun 24, 2021 11:48 PM UTC

so i was trying to connect ROAM for the first time to bluetooth to my iPhone 

i had it unplugged from power and nothing would work - it kept powering off. 

the MINUTE i plugged it in, then i could get the bluetooth flashing blue light and then pair it with my iPhone

i will try pairing it with my chromebook later.  

I would HIGHLY RECOMMEND the directions on the SONOS website include 

FIRST CONNECT TO POWER

https://support.sonos.com/s/article/4989?language=en_US

The Roam doesn’t need to be connected to external power to operate in either Bluetooth or WiFi mode - it sounds like your Roam isn’t quite charging correctly, perhaps? …what is the power-output stated on the charger in terms of volts/amps?

Translate
Chromatic Producer I
Jun 25, 2021 5:25 AM UTC

Reread 

FOR PAIRING you need to be connected to power otherwise pushing the power button turns off the speaker. 
At least MINE woUldnot pair until I connected to power 

Translate
Southern Gal
Ken_Griffiths
Jun 25, 2021 10:09 AM UTC

Reread 

FOR PAIRING you need to be connected to power otherwise pushing the power button turns off the speaker. 
At least MINE woUldnot pair until I connected to power 

Nope, I don’t need to have the Roam connected to power/charger to do that - it pairs just fine when I’m away from home and have taken it outdoors/camping, just like every other Bluetooth device… if it’s been paired with your phone once before, there’s no need to pair it a second time either, just select to reconnect/disconnect from your mobile BT device list. No need to keep pressing the rear power button unless you’re pairing with a ‘different’ device and you shouldn’t need to connect the Roam to power to do that either, just cycle through the pairing options.

Translate
Chromatic Producer I
Jun 25, 2021 8:48 PM UTC

Well that didnt work for me. 

I tried about 15 times.  it kept powering off and yes the power was marked as 100% in the Sonos app. 

As soon as I put the power cable in … i could pair. 

your mileage may vary but this is the only thing that worked. 

Translate
Southern Gal
Airgetlam
Jun 25, 2021 9:18 PM UTC

You may want to submit a system diagnostic within 10 minutes of experiencing this problem, and call Sonos Support to discuss it. It definitely is supposed to work the way that Ken explained, I’m wondering if there’s a hardware issue with yours.

There may be information included in the diagnostic that will help Sonos pinpoint the issue and help you find a solution.

When you speak directly to the phone folks, they have tools at their disposal that will allow them to give you advice specific to your Sonos system and network.

Translate
Bruce
Ken_Griffiths
Jun 25, 2021 9:30 PM UTC

@southern gal, 

Yes, as Bruce says, it sounds like you may have a fault. I have two Roans and both switch and work on Bluetooth away from home off their charger. So I would submit a diagnostic and call/chat to the Sonos Support Staff.

Translate
Lyricist I
Jun 27, 2021 12:24 AM UTC

Followed every suggestion in this thread. Still no joy. I’m a long time legacy Sonos user who know the product inside and out, and I also have a move. Can’t get the BT blue light to come on no matter what dance I do. Very frustrating Sonos!

 

By the way, I do hear the button-press chime, followed by the bluetooth pairing chime, still no joy. If I keep holding, I get the triple-chime power-off tone.

Same here. No solution. I also have a Move.  Looks like it going back. Terrible biz model to prevent Legacy users from growing their systems.  

Translate
Ken_Griffiths
Jun 27, 2021 1:00 AM UTC

Same here. No solution. I also have a Move.  Looks like it going back. Terrible biz model to prevent Legacy users from growing their systems.  

It seems you perhaps may have a fault then on both your devices, which is really unusual… I’ve just tested both the Move and Roam here and each connect/pair to Bluetooth with no issues at all. I just paired them both and took the attached photo to show that is the case.

Perhaps submit a diagnostic report and then contact Support Staff via this LINK. 

Translate
Lyricist I
Jun 29, 2021 2:01 AM UTC

Hi - I know this is an older thread….quick update on my end...I went through Sonos chat to figure out how to connect my Roam to my mobile via Bluetooth.  Couple of learnings…

 

  1.  you have to connect your Roam to wifi and the Sonos app before you can connect to Bluetooth. 
  2. If you have S1 app, you have to unplug all the S1 devices on your system and launch the S2 app.   Once you do that, the S2 app will start the connection process to the Roam device.  
  3. Once you have the Roam connected to through the S2 app, you can connect via Bluetooth to your device.  
  4. Plug back in the S1 devices and good to go…

 

Would be a lot easier if Sonos would publish this and also make the transition from S1 to S2 a little more gradual but the individual via chat was ver helpful. 

Translate
Ken_Griffiths
Jun 29, 2021 11:17 AM UTC

Hi - I know this is an older thread….quick update on my end...I went through Sonos chat to figure out how to connect my Roam to my mobile via Bluetooth.  Couple of learnings…

  1.  you have to connect your Roam to wifi and the Sonos app before you can connect to Bluetooth. 
  2. If you have S1 app, you have to unplug all the S1 devices on your system and launch the S2 app.   Once you do that, the S2 app will start the connection process to the Roam device.  
  3. Once you have the Roam connected to through the S2 app, you can connect via Bluetooth to your device.  
  4. Plug back in the S1 devices and good to go…

Would be a lot easier if Sonos would publish this and also make the transition from S1 to S2 a little more gradual but the individual via chat was ver helpful. 

Just to add to these instructions here, which are really more about splitting and creating an S2 Household from an existing S1 system. The majority of Roam users will not need these instructions as they will normally be adding their Roam to an ‘existing’ or ‘new’ S2 HH.

Many will have (hopefully) seen on the Sonos.com website that the Roam is designed for an S2 setup only. 

The only reason that the Roam needs to initially be connected to WiFi is to add it to the S2 system and register the device in the users online account/profile.  The Bluetooth audio will work after that registration has taken place, whether the user is connected to WiFi or not.

So the instructions posted are likely only for the very few users who wish to split their HH before installing Roam. The details are also mentioned in these Sonos Support documents, which also highlight the limitations of using a ‘Split’ S1/S2 System…

https://support.sonos.com/s/article/4845

https://support.sonos.com/s/article/4824

HTH

Translate