Skip to main content
Avid Contributor I
Sep 6, 2019 8:34 AM UTC
Question

Ethernet Powerlines with Sonos, reliable?

Hi guys

I currently have a dedicated SONOS bridge plugged into my router in order to utilise SONOSNET rather than my own Wi-Fi. In the same room i also have a Play:5 but it is not within reach of the router for me to run an Ethernet cable. It would be handy to get rid of the bridge if possible (less boxes, power sockets used etc). I already have a couple of Devolo Ethernet 500Mbps powerlines and could use these in order to connect the Play:5 into the router as use this as the bridge for SONOSNET.

Does anybody have any issues using powerlines with SONOS kit? I have seen a thread where SONOS don't recommend it.

I appreciate that i could just drop all the speakers on my Wi-Fi but i have found SONOSNET to be very reliable and would rather maintain this setup if possible. If the powerlines are not recommended or cause issues then i can maintain the existing bridge but just wondered. I may just try it anyway and see if i have any issues but wanted some opinions or experience first.

Thanks
    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

    13 replies

    ratty
    Sep 9, 2019 11:32 AM UTC
    Sonos support say there won't be a performance difference between SONOSNET 1 and 2 either.
    A strange statement, unless they're just talking about max bandwidth. Otherwise why develop, and tout, SonosNet 2.0 at all? Back when it first appeared there was a FAQ illustrating the increased range of 2.0. And why develop the Boost back in 2014 and promote it as having significantly better RF performance?

    I really do wonder about the quality of some advice from Support these days...
    Translate
    BumrahAuthor
    Avid Contributor I
    Sep 9, 2019 11:40 AM UTC

    Sonos support say there won't be a performance difference between SONOSNET 1 and 2 either.A strange statement, unless they're just talking about max bandwidth. Otherwise why develop, and tout, SonosNet 2.0 at all? Back when it first appeared there was a FAQ illustrating the increased range of 2.0. And why develop the Boost back in 2014 and promote it as having significantly better RF performance?

    I really do wonder about the quality of some advice from Support these days...


    Yeah i did wonder that. My wireless network is very strong at home so normally i wouldn't bother with SONOSNET. However as i now use Google Wi-Fi MESH, the controller app won't always connect, i am assuming because of the client and band steering? I could be wrong but it seemed a little unreliable.
    Translate
    ratty
    Sep 9, 2019 11:45 AM UTC
    However as i now use Google Wi-Fi MESH, the controller app won't always connect, i am assuming because of the client and band steering? I could be wrong but it seemed a little unreliable.
    A multi-node Google mesh contains a router. Since that splits the local network, Sonos won't work across it. In other words all the Sonos components -- players and controllers -- have to be either 'upstream' or 'downstream' of the primary Google node.

    Also, Google WiFi autoselects channels. It's possible therefore that it could pick one which clashes with SonosNet.
    Translate