Skip to main content
Contributor I
Jun 27, 2019 4:28 AM UTC
Answered

Connect:Amp to non Sonos speakers?

I recently moved into a house with an 11 room Sonos set up. The old owners left all the equipment except for 1 room, the living room, which would be the 12th room in the set up.

In that room, there are two Connect:Amps. One is for the speakers outside by the pool, the other is for that living room.

However, there are no more Sonos speakers in that room. So my question is, could I set up an older Pioneer system to that Connect:Amp without having to spend upwards of 1,000 bucks to properly outfit the room?
    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
    airforceteacher
    Headliner I
    Jun 27, 2019 3:00 PM UTC


    If it looks like either of these, they're passive speakers and you just need a pair of wires from the Connect:Amp to each speaker.

    11 replies

    Jun 27, 2019 4:53 AM UTC
    The Connect Amp needs speakers of the kind Sonos does not make - unamplified and therefore passive speakers. One pair for each amp. Are those missing?
    Translate
    cparzychAuthor
    Contributor I
    Jun 27, 2019 5:04 AM UTC
    Didn’t mean to click the answer button...but the only thing left in that room was the Connect:Amp.
    Translate
    Jun 27, 2019 5:37 AM UTC
    If you want music from those amps, you will have to buy passive speaker pairs; outdoor weather proof ones for the poolside, and run speaker wires to both pairs.
    Translate
    cparzychAuthor
    Contributor I
    Jun 27, 2019 2:06 PM UTC
    The outdoor pool speakers are still there and work fine. So I guess my next question is, are those pioneer speakers I have “passive?” They need speaker wire to be hooked up to its original power unit.
    Translate
    jgatie
    Jun 27, 2019 2:14 PM UTC
    The outdoor pool speakers are still there and work fine. So I guess my next question is, are those pioneer speakers I have “passive?” They need speaker wire to be hooked up to its original power unit.

    If there are speaker wires hooked up, they are passive.
    Translate
    airforceteacher
    Headliner I
    Jun 27, 2019 2:56 PM UTC
    If you're doubtful, take a picture of the back of the speakers with the connectors and post it here to be sure.
    Translate
    airforceteacher
    Headliner I
    Jun 27, 2019 3:00 PM UTC


    If it looks like either of these, they're passive speakers and you just need a pair of wires from the Connect:Amp to each speaker.
    Translate
    cparzychAuthor
    Contributor I
    Jun 27, 2019 3:03 PM UTC
    It’s the top one. Thank you very much!
    Translate
    Contributor II
    Aug 25, 2019 11:09 AM UTC
    OK I have a red and white RCA cable coming from my installed speakers.... Can I connect these to the AMP? If I open the cables will there be cable pairs for each Left and Right?
    Translate
    Jeff S
    Retired Sonos Staff
    Aug 26, 2019 6:12 PM UTC
    OK I have a red and white RCA cable coming from my installed speakers.... Can I connect these to the AMP? If I open the cables will there be cable pairs for each Left and Right?

    Hi there,

    RCA cables typically come from powered speakers. You'd want to use a Sonos Connect because it has RCA audio outputs. You'd connect the RCA cable to the audio outputs on the Connect, and then you could send Sonos audio to your powered speakers.

    The Connect:Amp is a bit different, they use speaker cables to send audio to unpowered speakers. The Connect:Amp does not have an RCA audio output.
    Translate
    Help others find useful content by clicking the like button and selecting the best answer to your question.