Skip to main content
Enthusiast I
Jul 20, 2022 10:00 PM UTC

Changing Play:1 to 5Ghz WiFi

 I noted that with OS 14.12 that 5GHz WiFi is supported on my older Play:1

Stupidly I went ahead with trying to change network settings.

The mobile app just wouldn't prompt to change or add settings in Manage Networks → Update Networks, even after deleting the existing network and connecting by wired, it just kept on looping round not finding the Sonos (as is mentioned in other threads here - as well as prompting to enable Bluetooth).

I started to worry I’d never get wireless working again, in the end I factory reset the Sonos (hold Play button while powering on) and luckily the mobile app then did find the Play:1 and prompted to connect to the 5GHz SSID straight away.

But the reset lost all settings, services, favourites, connections to the library, to Alexa, everything in fact, so a simple network change ended up taking hours of work.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

17 replies

jwsgAuthor
Enthusiast I
Jul 22, 2022 12:02 PM UTC

@Ken_Griffiths Many thanks for taking the time to test this

On mine after clicking ‘Find System’ it stays on ‘Searching for your system’ for several seconds before looping back to the ‘Find System’ button - now as as it did before.

I tried the wired connection which really should have worked but still didn’t - it just wouldn’t advance to ‘Select a product to change...’

After I deleted the existing SSID hoping that might trigger the next stage of the wizard that I had to resort to a factory reset as it then had no way to connect wirelessly

It’s hard to understand what with my setup that if the app can control the speaker OK it won’t advance to the ‘Select a product to change ...’ stage - even when wired

 

Translate
Ken_Griffiths
Jul 22, 2022 12:52 PM UTC

@Ken_Griffiths Many thanks for taking the time to test this

On mine after clicking ‘Find System’ it stays on ‘Searching for your system’ for several seconds before looping back to the ‘Find System’ button - now as as it did before.

I tried the wired connection which really should have worked but still didn’t - it just wouldn’t advance to ‘Select a product to change...’

After I deleted the existing SSID hoping that might trigger the next stage of the wizard that I had to resort to a factory reset as it then had no way to connect wirelessly

It’s hard to understand what with my setup that if the app can control the speaker OK it won’t advance to the ‘Select a product to change ...’ stage - even when wired

I didn’t see the issue you mention (obviously), the app ‘update networks’ feature scanned and found the system here and I got the screen where you can then usually slide left and right to step through the devices and select a product to add a trusted network to it - maybe a reboot of the network ‘might’ have resolved the issue, but I guess the horse has bolted now, it might even be a router setting too, perhaps?

Rather than opting  to reset ALL, post your decision to remove your WiFi credentials from the network settings, it might have been easier to leave one device cabled to the router and then reboot the others, forcing all to then use the in-built SonosNet connection instead of the routers WiFi signal. At least that would have saved you resetting everything and starting over from ‘factory’.

Its all done now though I guess… 🤷‍♂️

I do think, personally speaking this ‘update networks’ area of the App however could be made easier to use for the end-user and perhaps Sonos might at some point take a look at how to make it work well - I did find it a bit ‘flakey’ and had to reboot the Play:1 speaker to get things to work.

Anyhow, what’s done is done, I guess. 

Translate
jwsgAuthor
Enthusiast I
Jul 22, 2022 1:54 PM UTC

Thank you again @Ken_Griffiths for your time. I only have one speaker.

As you and @Corry P suggested I tried online chat

We tried changing phone WiFi band and using wired connection and sending diagnostics.

I think I was able to put across the issue that the app is able to fully control the speaker but the network settings wizard is unable to get to your 3rd screen to choose the speaker and change network settings

Even after a 1 ½ hour session nothing was really resolved except perhaps that the router might be to blame but I do now have a case open to move on to phone support

Translate
jwsgAuthor
Enthusiast I
Jul 22, 2022 3:25 PM UTC

In fact telephone support suggested the network settings issue is instead with the controller app and is under investigation and the IOS app or a different Android device may work OK in the meantime

Translate
jwsgAuthor
Enthusiast I
Sep 21, 2022 11:36 AM UTC

This appears to have been resolved in the Android app / Sonos firmware with release 14.16 - the app now finds the system in Update Network. There’s also an extra step - as well as needing Bluetooth enabled on the phone it now asks for NFC.

Translate
Mr. T
Sep 21, 2022 11:52 AM UTC

This appears to have been resolved in the Android app / Sonos firmware with release 14.16 - the app now finds the system in Update Network. There’s also an extra step - as well as needing Bluetooth enabled on the phone it now asks for NFC.

See @Corry P’s comment yesterday on this thread:


Surprised the Release Notes haven’t been updated to include 14.16, which you’d expect such a fix to be mentioned.

Translate
Corry P
Sonos Staff
Sep 21, 2022 11:54 AM UTC

Hi @jwsg 

I’m glad to hear the issue has been resolved - 14.16 did indeed address quite a few.

Thanks for updating this thread!

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein