Skip to main content
Contributor III
Dec 14, 2017 9:42 PM UTC

Cannot connect Sonos Play 1

I am trying to set up my PLAY:1 and can't complete the process. It can find my player and asks me to hold down the two buttons until I hear a chime, which I do, and then nothing happens. It doesn't move beyond that screen, and the flashing amber light eventually becomes a solid red. My computer app tells me it couldn't find it, even though it found it seconds before to identify which player I wanted to add.

This is a new PLAY:1 that I was sent about 6 months ago when my other one did the same thing. I did do a factory reset once because it was my only remaining recourse. Any ideas? MY PLAY:3 is connected and works fine.
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

16 replies

Airgetlam
Dec 14, 2017 9:47 PM UTC
Have you tried connecting it to your router with an ethernet cable? If so, I'd probably submit a system diagnostic, and post the number here, for the folks at Sonos to look at.
Translate
Bruce
Contributor III
Dec 15, 2017 8:05 PM UTC
Good idea. I will do that. Although, with my luck it'l work fine hardwired with no diagnostic story to tell.
Translate
Airgetlam
Dec 15, 2017 8:33 PM UTC
If you run the diagnostic immediately, it should contain 10 to 15 minutes of back data in it, so it would show whatever potential issue there was before it was connected with the ethernet cable. As far as I'm aware, the only way to clear those logs is to do a factory reset, which in your case, I would absolutely not recommend.
Translate
Bruce
Contributor III
Dec 20, 2017 7:16 PM UTC
I ran a diagnostic just now after trying to connect. I tried wirelessly and then connected via ethernet. Both times the software could not find my Sonos PLAY:1 after requesting that I hold down Play and + until I hear a chime.

Diagnostic code was: 8248388

When I get through to the point where it can't find it and I say "Try again," I can no longer get the PLAY:1 to chime, even though the light is flashing green.

Did I get another lemon?
Translate
Airgetlam
Dec 20, 2017 8:55 PM UTC
Hmm. Seems unlikely, but let's wait and see what the Sonos Tech can tell from that diagnostic. If you prefer not to wait for a response here, you can try one of their more immediate methods, as indicated behind the link "Contact us" at the bottom of this page.
Translate
Bruce
Contributor III
Dec 21, 2017 4:55 PM UTC
Thank you!
Translate
Chris
Lead Maestro
Dec 21, 2017 4:59 PM UTC
What router brand/model are you using?
Translate
Respect the Queue (2)Move (3)Beam (1) Era100 (2)ARC (1)SonosOne (1)Playbar (4)Play5 (4)Play1 (3)Play3 (1)Port (2)Connect (1) Roam (2) Ace (1)Connect:Amp (4)Sonos Amp (1)Sub + (9) Echo + Smartthings; (2)Play)
Contributor III
Dec 21, 2017 6:09 PM UTC
ASUS 3100. And I’ve got a PLAY:3 already connected.
Translate
Contributor III
Dec 21, 2017 6:10 PM UTC
Airtime fairness is disabled.
Translate
Contributor III
Dec 21, 2017 6:11 PM UTC
And I’m on the 2.4 GHz network.
Translate