Skip to main content
Contributor III
Jan 9, 2022 5:22 AM UTC
Answered

ARC mounting

How long is the mounting bracket for the ARC?   Trying to figure total length and where the screws would be.  I have a cabinet that the TV is in.  The old “hole for your TV” idea.   Problem is the hole is not long enough to just put the ARC on it.   And the shelves sit in from the concrete hole.  Would you suggest putting the bracket on the shelf below it and just pulling that shelf out a bit?  I’m not sure how else to do it.

 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Lead Maestro
Jan 9, 2022 6:17 AM UTC

Here are the dimensions of the Arc wall mount:

32-5/16” W x 1-5/8” H x 5/16” D

The problem with putting the Arc on the shelf below is the side walls will probably block the side-firing drivers. Sonos recommends at least 1 foot of clearance from a wall or any obstruction on each side of the Arc.

"Receive with simplicity everything that happens to you." - Rashi

17 replies

Lead Maestro
Jan 9, 2022 6:17 AM UTC

Here are the dimensions of the Arc wall mount:

32-5/16” W x 1-5/8” H x 5/16” D

The problem with putting the Arc on the shelf below is the side walls will probably block the side-firing drivers. Sonos recommends at least 1 foot of clearance from a wall or any obstruction on each side of the Arc.

Translate
"Receive with simplicity everything that happens to you." - Rashi
bbogottAuthor
Contributor III
Jan 9, 2022 4:23 PM UTC

Thank you.   The shelf isn’t wide enough anyway.  My thought was to bring that shelve below out farther (past the wall) and then attach the ARC to the front of the shelf.  Or even just put it on the shelf.  

Translate
AjTrek1
Jan 9, 2022 5:54 PM UTC

Thank you.   The shelf isn’t wide enough anyway.  My thought was to bring that shelve below out farther (past the wall) and then attach the ARC to the front of the shelf.  Or even just put it on the shelf.  

If understand your thought process you intend to extend the shelf out further. The current shelving looks fixed so where is the additional length coming from?

If you are planning on designing a custom shelf I’d suggest doing so for the shelf that supports the TV. Make sure you have enough weight behind the TV to counter the weight of the Arc. You may have to raise the TV a bit so that screen clears the height of the Arc.

If you decide to go with your original plan (using the shelf below the TV) I still suggest a weight in the rear to counter the weight of the Arc.

Translate
Together Everyone Achieves More = T.E.A.M.
bbogottAuthor
Contributor III
Jan 9, 2022 6:47 PM UTC

I can extend the shelf I think.   Not sure I would want to do that with the TV however.  And not sure how to raise the TV either.   Do you think the shelf below is too low? Also thought about just going with the Beam instead of the Arc but have been told the Arc is so much better. 

Translate
AjTrek1
Jan 9, 2022 9:14 PM UTC

The shelf below should be OK. Here’s my idea on how to extend the shelf with two bolts on either end and possibly a 3rd bolt in the middle. I would still set a counter weight in the rear of the lower shelf. The Arc is better than the Beam 2 for a complete home theater experience. 

 

Translate
Together Everyone Achieves More = T.E.A.M.
bbogottAuthor
Contributor III
Jan 9, 2022 9:27 PM UTC

I can extend the shelf.  And can figure out counter weight behind it pretty easily.   Wondering if the ARC might sort of overpower the tv visually.  The TV is only a 48” LG.  And more and more articles are saying the Beam is just as good (maybe better in some ways) than the Arc.

Translate
AjTrek1
Jan 9, 2022 10:27 PM UTC

I don’t buy that reasoning regarding the Arc vs the Beam2 and I have both. The shape and layout of the room is what influences any soundbar. Especially so when you are playing multi-channel audio like Dolby Atmos. 

For example neither the Arc nor Beam will perform as intended in a room with 13 foot ceilings and 15 feet to the nearest side wall on both sides. IMO… In a room of that shape the best you can hope for is sound similar to 2.0 stereo. Surrounds and a sub in such a room would be mandatory to augment the Arc or Beam2.

Regarding visual aspects of the Arc or Beam2… purchase the color that doesn’t draw attention. White in a room with dark decor will always draw the eye. Bottom-line is to select the color that best makes the Arc or Beam2 as invisible as possible so that the viewer is watching the screen and not focusing on where the audio is originating from.

Translate
Together Everyone Achieves More = T.E.A.M.
bbogottAuthor
Contributor III
Jan 9, 2022 10:31 PM UTC

Interesting.   Thanks for the reply.   It is a room with very high ceiling.   At least 15ft.   I was already planning on a couple ones and a sub.   Just seeing if the beam would suffice for space.  

Translate
AjTrek1
Jan 9, 2022 10:46 PM UTC

Interesting.   Thanks for the reply.   It is a room with very high ceiling.   At least 15ft.   I was already planning on a couple ones and a sub.   Just seeing if the beam would suffice for space.  

No problem. The Beam 2 doesn’t have upward firing speakers… only side firing. IMO the Arc would be a better choice. If funds permit you could buy both and audition them in your space to determine which will meet your needs. Sonos offers a 45 day return ( no questions asked) and some retailers offer 10-15 day returns. Good luck with your decision and shelf extension project 😊

Translate
Together Everyone Achieves More = T.E.A.M.
bbogottAuthor
Contributor III
Jan 9, 2022 11:01 PM UTC

Great advice!   Now I am even more confused which way to go.  I also have a tv upstairs and it could do an immersive beam or arc.   It’s a bedroom so don’t really need it to be home theatre.  Lol.   Also, if I did the beam downstairs with the pictured TV, I probably wouldn’t extend the shelf.   Just put it on there below the tv.  Would that still sound alright?

Translate