Skip to main content
Contributor I
Jun 27, 2013 3:53 AM UTC

Add option to turn OFF Ethernet LEDs

LEDs for Ethernet connection blink and are distracting in dark rooms (my Sonos that is connected to the Ethernet is in the bedroom). Can we have option to turn those LEDs OFF? There is option to turn on main indicator light but not Ethernet LEDs. I have seen similar feature on Cisco routers.
    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

    13 replies

    Prominent Collaborator I
    Jun 27, 2013 3:07 PM UTC
    Why not simply cover them? You will have a hell of a time troubleshooting if you have no connectivity lights to tell you status?
    Translate
    Lyricist I
    Jul 14, 2013 7:22 PM UTC
    You can always turn back on if you need to debug ... I have taped them but this is lame :-0
    Translate
    Lyricist I
    Nov 2, 2013 12:10 PM UTC
    I have the same problem. My PLAY5 is in the bedroom and unfortunately the LEDs on the Network Connection are very disturbing. I do not understand why you can switch the LEDs on the top, but the LEDs on the back is not it? Please upgrade this option in a future software update. Thank you very much
    Translate
    Avid Contributor I
    Jan 15, 2015 1:46 PM UTC
    UP. Play:1 kinda sorted this out by removing the LEDs entirely, which removes any doubt on previous posts about debugging... but still, Sonos, please add an option similar to the one controlling the top LED.
    Translate
    Contributor II
    Jan 14, 2017 9:44 PM UTC
    I recently decided to wire the PLAY:3 in my bedroom but now I have the link LED on and packet LED flashing constantly, can we get some traction on this feature request?
    Translate
    Airgetlam
    Jan 17, 2017 9:25 PM UTC
    Heh. Perhaps you could get some traction, but I've found small pieces of black electrician tape to be equally useful, and immediately resolve the issue.
    Translate
    Bruce
    Contributor II
    Jan 17, 2017 9:29 PM UTC
    Yes, that is my workaround but am looking for a fix.
    Translate
    ratty
    Jan 17, 2017 10:19 PM UTC
    Yes, that is my workaround but am looking for a fix.
    A software 'fix' for a low level function of the Ethernet NIC is almost certainly not feasible. I've also used the black insulating tape method. Works perfectly.
    Translate
    Airgetlam
    Jan 17, 2017 11:18 PM UTC
    I've got quite a few devices that I use the "tape fix" for. Would be wonderful if there was a more generic software fix, but I'm not holding my breath, for the Sonos, or Netgear, or.... name any device that has a light. I was actually impressed that they were concerned enough to allow us to turn off the topside light on the speakers.
    Translate
    Bruce
    Contributor II
    Jan 17, 2017 11:42 PM UTC
    This was how my grandfather fixed his check engine light for years.
    Translate