Skip to main content
Contributor I
Jun 12, 2021 1:36 PM UTC
Answered

Sonos Move won't pair to another HomeKit Home

I accidentally paired my Sonos system to the wrong Apple HomeKit Home. Turns out you cannot add them to another Home after that. You have to reset each speaker for it to work. Well, actually I ended up having to create an entirely new Sonos system and had to recreate everything. After a bunch of resetting I managed to bring all my speakers to the correct HomeKit Home… except my Sonos Move. It just WILL NOT add. Here’s how it goes:

  1. Turn off Sonos Move.
  2. Wait 72 hours. Yes, you cannot remove a Sonos Move from you system. You’ll just have to wait. 😖
  3. Power on the Move while holding the connect/pair button. Wait for the light to turn orange. This will reset the Sonos Move.
  4. Add the Sonos Move to the Sonos system in the Sonos app.
  5. Open the Home.app and select Add Accessory followed by I Don’t have a Code or Cannot Scan.
  6. Select the Sonos Move.
  7. Get message saying “Unable to Add Accessory” with a subtext saying “Home couldn’t connect to this accessory.” This is the same error message I got with all the other speakers, but I was able to get those working after resetting.

Gotta say that Sonos’ support for Apple HomeKit is super buggy. Come to think of it, I’ve previously had a lot of issues getting some speakers to pair with a system even just in the Sonos app… I’m going off topic now.

How can I solve this?

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Ken_Griffiths
Jul 10, 2021 7:17 PM UTC

@Ken_Griffiths Those are the exact steps I already followed.

In that case I suspect the issue lies with your new Apple HomeKit Home, rather than the Sonos product. I would perhaps consider deleting your Home and setting up a new ‘primary’ Home from scratch, or maybe speak with Apple support… I don’t think the issue will be with the Sonos speaker.

13 replies

Ken_Griffiths
Jul 10, 2021 7:36 PM UTC

Just as a test here and to perhaps try to assist you @sniarn, I have just factory reset a Sonos ‘Move’ here and set it back up in the Sonos App as ‘Bathroom’ (its original name) and then opened HomeKit on my iPad and chosen to ‘Add Accessory’ and the speaker immediately shows up in the accessory list… I’m able to add it to the Home without any issue.

I have taken a couple of screenshots (attached). So I strongly suspect it’s likely to be something to do with your Apple Home, assuming you started by factory resetting your Move.

Translate
sniarnAuthor
Contributor I
Jul 10, 2021 7:38 PM UTC

@Ken_Griffiths Please see my previous post. Thanks again!

Translate
Ken_Griffiths
Jul 10, 2021 7:41 PM UTC

@Ken_Griffiths I’m embarrassed to say that deleting the HomeKit home and starting over did the trick. The speaker added right away. Now I have to recreate all the stuff I had configured in HomeKit. So it seems the Sonos unit was not the issue at all.

Thanks for all your help.

Ah that’s okay, it happens to the best of us.👍

Whilst you were doing your recreation of the Apple Home, I did go off to test things here as you can see by my last post. I just wanted to be sure there wasn’t an issue with the current ‘Move’ speaker software/firmware, or the Sonos/HomeKit Apps. 

Anyhow, the more important thing is the outcome …and all’s well, that ends well.👍

Translate