Skip to main content
Contributor I
Jul 25, 2023 1:36 AM UTC
Answered

Unable to save Roam to group

I have two Sonos Plays and a Roam. I can group the Sonos plays  together, but not the Roam. All are visible in my system and selectable in the Grouping option, but when I try to save the group (either with all devices together or just the Roam), I receive the following error: “Unable to save group. Try again later”.

 

I have tried later, much later, and much much later to no avail.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
MProdorAnswer
Contributor I
Jul 26, 2023 1:03 PM UTC

Hi All, thanks for your help on this. I confirmed I had the correct App (S2 - Gold icon), that it was up to date, and that my Roam was connected to the correct WiFi.

 

This morning I took the nuclear option and performed a factory reset on the Roam and readded it to my system.  That did it! I can now add it to groups and select it as a separate device, with out adding it to a group.

 

Thank you all for your help. Sometimes everyone just needs a good jolt of factory rest to get things aligned. 

16 replies

Ken_Griffiths
Jul 25, 2023 10:40 PM UTC

@MProdor,

If you do have an existing ‘group’ that’s been created in the Sonos App already, then I would first delete that group ..and then start again with a brand new group.

Translate
Senior Virtuoso
Jul 25, 2023 10:52 PM UTC

Airgetian - understood, but I do not have any othr alternative. When Ever I try to add the Roam, it requires I add it as a group. Here are the steps I use:

 

  1. Select music/play list
  2. Click the square/Arrow on the bottom of the app, beside the volume
  3. Click the “+”
  4. Chose Roma under Available
  5. Enter a Group Name
  6. Click Save

Receive “Unable to Save Group., Please try again later.” message

Rather than clicking the “+”, which is to create a permanent group, just click to select the room(s) you want to include in your temporary group. Then click “Done”. 

Translate
MProdorAuthor
Contributor I
Jul 26, 2023 12:31 AM UTC

Thanks to everyone for trying to help on this.

 

@nik9669a  - see the attached picture, my only options when adding another “room” is to use the “+” sign. The Roam is grayed out, until I click the “+”, which takes me to the group creation.

 

 

@Ken_Griffiths  - I can create any group in the App, except when I try to include the Roam. I removed all groups, recreated my Groups, then tried to add Roam I get the attached error message:

 

Is it possible I’m using the wrong controller - My App just says Sonos and not Sonos S2

Translate
Senior Virtuoso
Jul 26, 2023 7:39 AM UTC

Roam requires S2. 

That’s probably why it’s greyed out in the screen shot above.

Frankly, I’m surprised in your first post that you say “All are visible in my system and selectable”. I would have expected it not to install on S1, or else never to have been selectable in the app. 

 

Anyway, that seems to identify the root cause and solution to your issue. 
 

BTW, in the screenshot above, Sonos Roam is greyed out meaning it’s not accessible. Once you upgrade you’ll get a similar page, but the Roam should not be in grey. If you click the selector circle to the left of the roomname (“Sonos Roam”, in your screenshot above) you can group it with your Bookshelf and/or Office. 

Translate
Ken_Griffiths
Jul 26, 2023 8:23 AM UTC

@MProdor,

My S2 App (gold icon) just says Sonos too - my S1 App (black icon) says S1 Sonos, so I think you probably have the correct S2 App here. Can you confirm the icon to launch the App is gold coloured and not black? - If so, something is not right - have you checked for any Sonos updates to see if there are any firmware updates that need to be installed on the Roam?… ‘Settings/System/System Updates’

Can you confirm you see all three of your speakers in ‘Settings/System/About My System’ in your Sonos App - can you also just ensure that your Roam is connected to the same WiFi access point and WiFi band as your mobile controller device.

 

 

Translate
MProdorAuthorAnswer
Contributor I
Jul 26, 2023 1:03 PM UTC

Hi All, thanks for your help on this. I confirmed I had the correct App (S2 - Gold icon), that it was up to date, and that my Roam was connected to the correct WiFi.

 

This morning I took the nuclear option and performed a factory reset on the Roam and readded it to my system.  That did it! I can now add it to groups and select it as a separate device, with out adding it to a group.

 

Thank you all for your help. Sometimes everyone just needs a good jolt of factory rest to get things aligned. 

Translate