Skip to main content
Contributor I
Dec 12, 2022 6:25 AM UTC
Answered

Sonos Roam not turning on with blinking white light while charging

Hey all,

My Roam’s battery apparently ran out and I’ve been charging it with usb cable for the last 8 hours.

At first the battery light was solid orange.

Now the battery light has turned off and status light is blinking white but it’s not turning on.

I haven’t changed my router nor changed the router’s name and password.

I’ve tried all the steps to reset like:

  • Press and hold the power button on the back of your Roam for 5 seconds to power it off. You will hear a chime and the status LED on the front will turn off.

  • While holding the Play/Pause button, press and release the power button on the back of your Roam.

  • Continue holding the Play/Pause button until the light on the front flashes orange and white.

  • The light will flash green when the process is complete and your Sonos Roam is ready to be set up.

This did not work.

Anybody have any suggestions, I’m not sure what to do now this haven’t happened before.

Thanks in advance!

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Jamie A
Jamie AAnswer
Sonos Staff
Dec 14, 2022 10:03 AM UTC

Hi @daziest, welcome to the Sonos Community!

The last two posts by @buzz mention this already, but a blinking white LED light means one of two things on a Sonos product: it’s either booting up after being powered on/connected to power or the device is connecting to a network.

If you are able to power the Roam off (where there is no LED light), then I’d recommend rebooting your network by powering off your router for a few minutes, then powering it back on. If you have any extra networking equipment, make sure to power those off as well.

If, after rebooting the network and powering the Roam back on, the Roam still has a flashing white LED, then it seems likely to be a hardware fault. In this case, it would be best to reach out to our support team as they have the tools necessary to troubleshoot this issue with you.

I hope this helps!

23 replies

Lyricist I
Aug 16, 2023 11:38 AM UTC

Hi @daziest, welcome to the Sonos Community!

The last two posts by @buzz mention this already, but a blinking white LED light means one of two things on a Sonos product: it’s either booting up after being powered on/connected to power or the device is connecting to a network.

If you are able to power the Roam off (where there is no LED light), then I’d recommend rebooting your network by powering off your router for a few minutes, then powering it back on. If you have any extra networking equipment, make sure to power those off as well.

If, after rebooting the network and powering the Roam back on, the Roam still has a flashing white LED, then it seems likely to be a hardware fault. In this case, it would be best to reach out to our support team as they have the tools necessary to troubleshoot this issue with you.

I hope this helps!

Thanks Jamie, yep contacted support team and getting it replaced

 

Are they replacing it outside the one year warrantee? I’ve had mine for nearly two years.

Translate
Jamie A
Sonos Staff
Aug 16, 2023 3:27 PM UTC

Hi @paulaproof, welcome to the Community!

While a hardware fault is possible, it could be a different issue that our support team can help you resolve. If they do discover a hardware fault with your Roam then they can discuss replacement options with you.

I hope this information helps!

Translate
Lyricist I
Sep 19, 2023 9:51 AM UTC

same issues as highlighted in the posts above .. white light keeps blinking  .. can’t reboot .. nothing works .. its so frustrating

Translate
Lyricist I
Sep 23, 2023 2:31 PM UTC

Same, this product sucks. I've been combing sonos responses and they all just say do a factory reset.

 

I love my other sonos speakers, but the Roam is a complete fail.

Translate
Ken_Griffiths
Sep 23, 2023 3:00 PM UTC

same issues as highlighted in the posts above .. white light keeps blinking  .. can’t reboot .. nothing works .. its so frustrating

Maybe just try connecting the Roam to a different WiFi network, or even a mobile hotspot and just see if that works, as it might be the case the Roam is not getting its IP address from your router. It will be at least useful to know if it works on a different WiFi - Note: if using a mobile hotspot, it cannot be the same device that is running the Sonos controller App. 

See this link too on how to add another network, rather than perhaps factory-resetting the speaker:

https://support.sonos.com/en-us/article/connect-sonos-to-a-new-router-or-wi-fi-network

Translate
Lyricist I
Jan 11, 2024 8:29 PM UTC

Hi @paulaproof, welcome to the Community!

While a hardware fault is possible, it could be a different issue that our support team can help you resolve. If they do discover a hardware fault with your Roam then they can discuss replacement options with you.

I hope this information helps!

Nope, they will just offer you 30% off a new one, which is insulting and turning me off the Sonos brand entirely. Support has offered me nothing that I didnt already try after reading these forums. Holding down all the buttons, charging for days, i have the right charger and cable. 

This appears to be a portable speaker that cannot handle being used until the battery runs out. At that point it is unrecoverable. 

 

Translate
Lyricist I
Jan 11, 2024 8:30 PM UTC

same issues as highlighted in the posts above .. white light keeps blinking  .. can’t reboot .. nothing works .. its so frustrating

Maybe just try connecting the Roam to a different WiFi network, or even a mobile hotspot and just see if that works, as it might be the case the Roam is not getting its IP address from your router. It will be at least useful to know if it works on a different WiFi - Note: if using a mobile hotspot, it cannot be the same device that is running the Sonos controller App. 

See this link too on how to add another network, rather than perhaps factory-resetting the speaker:

https://support.sonos.com/en-us/article/connect-sonos-to-a-new-router-or-wi-fi-network

How would you connect the Roam to a different network if it wont power on?

Translate
Ken_Griffiths
Jan 11, 2024 8:36 PM UTC

same issues as highlighted in the posts above .. white light keeps blinking  .. can’t reboot .. nothing works .. its so frustrating

Maybe just try connecting the Roam to a different WiFi network, or even a mobile hotspot and just see if that works, as it might be the case the Roam is not getting its IP address from your router. It will be at least useful to know if it works on a different WiFi - Note: if using a mobile hotspot, it cannot be the same device that is running the Sonos controller App. 

See this link too on how to add another network, rather than perhaps factory-resetting the speaker:

https://support.sonos.com/en-us/article/connect-sonos-to-a-new-router-or-wi-fi-network

How would you connect the Roam to a different network if it wont power on?

Not sure what you mean here because @vineyesh’s Roam is powering ‘ON’ - the user mentions the devices white LED light is blinking - that indicates its looking to get an IP address from the local DHCP server.

Translate
Lyricist I
Jan 11, 2024 8:41 PM UTC

same issues as highlighted in the posts above .. white light keeps blinking  .. can’t reboot .. nothing works .. its so frustrating

Maybe just try connecting the Roam to a different WiFi network, or even a mobile hotspot and just see if that works, as it might be the case the Roam is not getting its IP address from your router. It will be at least useful to know if it works on a different WiFi - Note: if using a mobile hotspot, it cannot be the same device that is running the Sonos controller App. 

See this link too on how to add another network, rather than perhaps factory-resetting the speaker:

https://support.sonos.com/en-us/article/connect-sonos-to-a-new-router-or-wi-fi-network

How would you connect the Roam to a different network if it wont power on?

Not sure what you mean here because @vineyesh’s Roam is powering ‘ON’ - the user mentions the devices white LED light is blinking - that indicates its looking to get an IP address from the local DHCP server.

Mine too is technically “on”. Solid white light sometimes, flashing white light other times when on the wired charger. But app cant find it, resetting does nothing. App technically shows it in Sleep Mode but none of the wake steps work. You cant do anything to control it from the app. 

Translate
Ken_Griffiths
Jan 11, 2024 9:02 PM UTC

Mine too is technically “on”. Solid white light sometimes, flashing white light other times when on the wired charger. But app cant find it, resetting does nothing. App technically shows it in Sleep Mode but none of the wake steps work. You cant do anything to control it from the app. 

In that case, have you ever tried setting it up on a different WiFi network - a mobile ‘hotspot’ for example, just to see what perhaps happens in that instance and if it gets allocated an IP address?

Edit: Note if using a hotspot - then you need to use a separate mobile device for the controller App.

Translate