Skip to main content
Contributor I
Oct 8, 2019 10:19 AM UTC
Answered

Sonos Move not showing

I’m having an issue where my new Sonos Move will connect to the network and will not show in the app. The bit that says offline disappears but so does the speaker. Restarting only fixes this issue some of the time. Any ideas?
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Ken_Griffiths
Oct 8, 2019 10:47 AM UTC
Perhaps try resetting the Move and switching WiFi band... I would put it on the further-reaching 2.4ghz band, particularly if you connected it to the 5ghz band during the previous setup.

Here is the reset procedure...
  1. Take Move off the charging base.
  2. Press and hold the power button for at least 5 seconds to power it off.
  3. Wait for 30 seconds
  4. Press and hold the Join button and place Move back on the charging base.
  5. Continue holding the Join button until the light on top flashes orange and white. Let go the button.
  6. The light will flash green when the process is complete and your Sonos Move is ready to be set up.
  7. If you did have Alexa/GA installed, then don’t forget to reinstall the voice assistant again via Settings/Services/Voice in the Sonos App

76 replies

Airgetlam
Apr 22, 2021 9:51 PM UTC

Since you mention a BT Smart Hub 2:

 

tl:dr, it’s a BT issue, not a Sonos issue. 

Translate
Bruce
Lyricist III
Apr 22, 2021 10:00 PM UTC

Since you mention a BT Smart Hub 2:

 

tl:dr, it’s a BT issue, not a Sonos issue. 

Dayum.. yup.. that is exactly it then! Thanks for link.. super helpful.

I did call BT and said it was affecting ‘unnamed’ smarthome devices and they turned it back around and blamed Sonos effectively!

Armed with the info from your link they’ll be getting both barrels tomorrow.

Thank you!

Translate
Airgetlam
Apr 22, 2021 10:40 PM UTC

Heh. The question would be, if it were Sonos’ issue, why is it not affecting anyone other that BT Smart Hub 2 users? But I’m just a smart alecky US guy, so pay no attention :)

Translate
Bruce
Contributor I
May 15, 2021 5:22 PM UTC

similar issue -- Move doesn’t show up on the Sonos app. I followed the factory reset steps and added it to the network, still can’t find the product. I tried the following using the app (Android):

 

System > Network > Manage Networks > Update Networks > add trusted network -- yes > find system > {scroll to find the Move} > select > follow steps to add to network > enter password for wifi, connect > “updating” > {wifi name} added as a trusted network for your system > done. 

 

System > Products, Move is missing

 

Add product {doesn’t find the Move} > I don’t see my product > [recommends factory reset, which I tired earlier] > followed steps to reboot > closed Sonos app > opened, System, doesn’t list Move product > add product, and the loop begins again.

 

Tried factory reset again, it finds the Move, connects to wifi successfully. [If it doesn’t appear in System tab, hold power button for 5 seconds, turn back on, finish setup from System tab]. Still doesn’t show under System tab, and the only option is to start the Add Product process again.

 

Note: the Move is listed as a system product  at https://www.sonos.com/myaccount/system/households/devices/

 

Rebooted Android phone, Move still isn’t listed under System

 

Rebooted router. Did factory reset again, with Move plugged in and within 2 feet of the router. Tried to add product from Android phone, no go.

 

Then I added product from an iPhone with no cellular service on it. The Move required an update. Once that was done, the Move was successfully added to the system -- it shows on two iPhones and the Android.

 

Not sure why it finally worked -- perhaps one of you will know. Maybe a problem with the Android app? Maybe using a wifi-only device helped?

 

Hope this helps someone. :)

 

Translate
Lyricist I
May 20, 2021 9:38 PM UTC

I have 2 Moves and I’m experiencing the same issue, I can’t get both Moves to appear together on the app, and they are on a boost along with my other wired Sonos speakers.  

Translate
Airgetlam
May 20, 2021 10:14 PM UTC

The Moves don’t have the hardware to connect to your BOOST, they have to hang off your WiFi signal. They’d appear in the Sonos controller system though, once they’re connected, as the router would see all speakers, regardless of how it reaches them. 

Translate
Bruce
Lyricist I
Jul 29, 2021 1:33 AM UTC

Come on Sonos. Where there’s smoke there’s fire. Move’s connection to the rest of the system is unstable. All sorts of strange things happen.

My most recent example: Move can’t be found on the app, but if I select ‘play everywhere’ Move does play but still doesn’t appear in the app and the only way to change volume is via the hardware. Then if I deselect a different speaker (a Play 3 in this case), Move stops playing. If I add the Play 3 back into the group, Move doesn’t play. But if  I select ‘play everywhere’ Move does play… but still doesn’t appear in the app… etc.

Then it gets stranger. I turn the Move off using the hardware switch at the back. My move immediately appears in the app! … listed as offline. I turn it back on... and the Move disappears from the app.

Yes I can reset the Move, re-add it to my system and it works perfectly… for a day or so then it disappears again. Around and around we go. Clearly in the above case my Move is actually connected to the wifi and to the rest of the Sonos network and FYI its in exactly the same place as one of my Play 1s used to (reliably) sit.

There is a bug somewhere relating to how the system tracks the Move. And it’s only the move. My other 8 Sonos speakers are (generally) very reliable and unaffected by my Move’s disappearing acts.

So please take this seriously because if your customers have to spend hours each week reconnecting their Move, it not only becomes worse than useless (just an expensive bluetooth speaker), it damages your brand and thereby your future viability. 

Translate
Lyricist II
Sep 4, 2021 6:04 PM UTC

My move is totally unusable as well.

Same as everybody else.  No move in the list of speakers then turn it off with the power button and it shows up as offline.  Turn it back on and it disappears.  I can replicate this with 100% reliability.  Shouldn't the opposite state to offline be online and available not gone?

I just tested Walt's theory and sure enough select play everywhere (7 nodes) and the move starts playing but is still unavailable in the app.   Remove any other speaker from the list and it shuts off but the good new is that seemed to make it available in the app and I can now use it.

So Sonos what's the issue?  I’ll even purchase a new router as networking seems to get blamed quite often in these threads.  Tell me Sonos what router do you recommend that will you guarantee will work with all of your products.  I don’t think it will fix the issue but I’ll give it a shot.

 

Translate
Lyricist II
Oct 9, 2021 12:18 AM UTC

Found another trick to make this thing work besides the select all speakers.  If you set an alarm and put the move and another speaker in the alarm it will work every time regardless of its in app status.

So its for sure a software thing if I can trick it into playing.  

Please Sonos fix it my kids are getting sick of listening to my music by hitting the play everywhere just to trick this thing into working.

Translate
buzz
Grand Maestro
Oct 9, 2021 12:32 AM UTC

JeffV,

Uninstall and re-install the iPad App.

Translate