Set up of Sonos Move

I have the exact same issue.  System works and recognizes all my other Sonos products and I can control them with the app without issue.  However, when I try to set up my new Move, I can get to the same screen you show above, but then cannot advance to “Go to accessory setup” next step.  Hope someone out there has a fix.

Same. So frustrating. 

Hi @Joeuf2000.

Welcome, thank you for reaching out to Sonos Community, I totally understand where you're coming from and I’m here to help.

Here are some steps you can try to set up the Sonos Move.

Restart your Move

Take Move off the charging base, and then hold down the Power button until Move turns off and a chime is played. After a few seconds, place Move back on the charging base and then try setting up Move again.

Reposition your Move

Temporarily bring your Move closer to your WiFi router. If your speaker is able to connect in this new location, the original location may be too far from the router to maintain a stable connection in WiFi mode. If that’s the case, you’ll need to increase the range of your WiFi network.

You’ll still be able to use Bluetooth mode to play music on Move in that location. Check our article about using Bluetooth on Move for more information.

Note that your Sonos Move needs to be in range of your Wi-Fi network even if it’s placed near another Sonos product. The Move can connect to your router’s Wi-Fi network but not the separate wireless network created by a wired Sonos product.

Try another mobile device

Open the Sonos app on another mobile device, and then try setting up Move again. Once setup is complete, you’ll still be able to use the original mobile device to control Move after connecting it to the existing system.

Let us know if it works. If you need help with any other information, please be sure to let us know.

Hi @Mark P -

I’m having the same issues, and this isn’t resolved.The reply marked as “answer” is really just somebody else saying that they have the same problem.

Any updates - I’m not enjoying my $400 MSRP paperweight. ;)

“The Move can connect to your router’s Wi-Fi network but not the separate wireless network created by a wired Sonos product.”

What exactly does this mean? 

I have an older Sonos Connect and two Ones and a sub - could it be that this system is all running on the “separate wireless network” and that’s why I can’t join my Move to it?

I have this issue as well.

Mark P says:

Restart your Move

“Take Move off the charging base, and then hold down the Power button until Move turns off and a chime is played. After a few seconds, place Move back on the charging base and then try setting up Move again.”

the only way I can get any chime to play is not through the Power button but pressing the join button while unit is on (button shown in the instruction sheet).  Chime sounds, but it still doesn’t join. 

What’s the JOIN BUTTON for and EXACTLY when do you press it?

How I solved this after a lot of frustration: My router has both 2G and 5G and was initially trying to get Move on network with the generic “auto select band network speed” name. I switched to the direct 2G speed and it worked… or maybe it was dumb luck. Note: The Sonos 1 app does not goe directly to add accessory when using iOS device, you have to do that manually as. Noted above.

Thank you and your son. That worked!