Skip to main content
Contributor I
May 11, 2024 5:18 PM UTC
Question

Unable to add second Sonos Sub G3 to existing system

Hi,

I can’t seem to get my second sub to connect to my system. It shows that it was set up already, but whenever I’ve tried ‘Connect Second Sub’ or ‘Assigned to Room’, the error always shows ‘There was a problem adding your Sub. Check the network connection and make sure your product is powered on.’.

 

Even Rebooting the product and connecting thru a Ethernet LAN Cable to the network, it still shows the same error. 
 

Please provide a solution. Thank you. 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

14 replies

Lyricist I
May 24, 2024 6:51 AM UTC

I had the same issue. I had to remove the first sub from the room, then I added the second sub first and the first one at the end.

Translate
daryltanAuthor
Contributor I
May 25, 2024 12:40 PM UTC

Thank you for the solution! Finally it is working. Cheers

Translate
Lyricist I
Jun 4, 2024 9:15 PM UTC

I am unable to remove my first sub! Error message.

Translate
Lyricist I
Jun 9, 2024 4:17 PM UTC

This solution worked for me as well when trying to add the second sub to the system. I removed the ‘old’ sub gen2 from the ARC (home theater setting). Then I added the new sub gen3 to the ARC and after that the ‘old’ sub gen 2. Both where added without warnings.

Translate
Pools-3015
Prodigy I
Jun 9, 2024 4:33 PM UTC

Hi,

I can’t seem to get my second sub to connect to my system. It shows that it was set up already, but whenever I’ve tried ‘Connect Second Sub’ or ‘Assigned to Room’, the error always shows ‘There was a problem adding your Sub. Check the network connection and make sure your product is powered on.’.

 

Even Rebooting the product and connecting thru a Ethernet LAN Cable to the network, it still shows the same error. 
 

Please provide a solution. Thank you. 

It is not advisable to connect a secondary speaker like a Sub or surrounds with Ethernet unless you also have the main speaker, soundbar or Amp connected first.

That being said, the Sub Gen 3 needs to be the first sub you pair with the soundbar because only the Gen 3 has the ability to have the second sub added to it.

Translate
Trending Lyricist I
Jun 15, 2024 10:54 PM UTC

Same issue for me but with 2 sub gen3. I turn around since one hour. I try to remove first sub, always error message, about my network, but my network work perfect.

Very frustrating, I just pay + 900$ for second sub……. ;-(

 

Uninstall sonos apps, reinstall, same issue, Second sub is connected to my network, but not assign. Impossible to assign…

Translate
Trending Lyricist I
Jun 15, 2024 11:48 PM UTC

I finally succeeded, I did a factory reset of the ARC soundbar. Because it is the centerpiece of the home theater, this erased the entire living room, the Arc, the two era 300s and the sub. Then I first connected the Arc, then a gen 3 sub, then the second gen 3 sub, then the two era 300 surrounds.

I just completed the trueplay calibration, and I started the playlist Dolby Atmos on Amazon music unlimited, from the sonos apps, and the difference between one and two sub gen 3 is immediately noticeable. It gives a richer, more complete sound on the two era 300s, yes, I'm amazed.

Large room here, 12 foot cathedral ceiling in the tip, vertical audio at 10, gives dolby atmos sound much better than 0.

 

Only one control for the 2 sub, not one for each. So I put +4 for sub… oh my god… :-)

Translate
Trending Lyricist I
Jun 16, 2024 1:16 AM UTC

Ouff… my god…

 

Translate
buzz
Grand Maestro
Jun 16, 2024 1:47 AM UTC

Subwoofers are very sensitive to room placement. Walk the room, playing a thumpy bass track, very close to the walls, with a handful of Post-It’s and a magic marker. You’ll discover spots where the bass is accentuated. Add a Post-It here. There will be a few spots where the bass is extra accentuated. Mark these with !!. If you place a subwoofer or listener at one of these “Peaks”, bass will be increased. Midway between Peaks there is a “Null” where bass will be minimized. Peaks and Nulls are more or less evenly distributed around the rooms. After you have some experience finding Peaks and Nulls along the walls, you’ll be able to find smaller Peaks and Nulls (in 3D) throughout the room.

In my college apartment I found a monster peak and placed a chair on it. This was a favorite spot for males because bass seemed to explode from inside your body. If I moved the chair a few inches the peak was gone.

Translate
Trending Lyricist I
Jun 16, 2024 2:17 AM UTC

Thanks to share these information. I made some test here. For now, this is my setup at home.

My setup (128mb) video.mov

Translate