Skip to main content
Contributor I
Jun 10, 2025 6:47 PM UTC
Answered

sonos amp takes audio from headphones

I have an amp and Ace headphones. The amp is connected to my Samsung laser projector through hdmi arc and my headphones through Bluetooth. Whenever I select the audio output to Bluetooth it selects it for a second and the the amp recapture the audio selection

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
106rallye
106rallyeAnswer
Jun 11, 2025 6:37 AM UTC

It is the Sonos application of CEC. If you temporarily disable CEC on the projector, the Bluetooth connection will hold.

12 replies

jgatie
Jun 10, 2025 7:27 PM UTC

TV Audio Swap for the Ace is not supported on the Amp, and the Amp cannot broadcast Bluetooth.

 

https://support.sonos.com/en-us/article/listen-to-your-tv-with-sonos-ace-tv-audio-swap

Supported home theater speakers

You can use TV Audio Swap with the following home theater speakers:

  • Arc
  • Arc SL
  • Arc Ultra
  • Beam (Gen 1)
  • Beam (Gen 2)
  • Ray
Translate
Stanley_4
Grand Maestro
Jun 10, 2025 8:53 PM UTC

I'm really bad at TV advice,,,

I think If you are using the projectors Bluetooth you will need to change the projector settings to not use the Amp as the output.

Might look at any autoplay options too, have the Amp not play TV sound when the TV comes on, only when manually selected.

Translate
106rallye
106rallyeAnswer
Jun 11, 2025 6:37 AM UTC

It is the Sonos application of CEC. If you temporarily disable CEC on the projector, the Bluetooth connection will hold.

Translate
AniDavidAuthor
Contributor I
Jun 11, 2025 1:37 PM UTC

Thank you, I am trying to change the audio input on the projector from the amp (CEC) to the Ace headphones (Bluetooth). Before I had the amp, I had a Pioneer receiver and did not have this problem

Translate
jgatie
Jun 11, 2025 1:43 PM UTC

Thank you, I am trying to change the audio input on the projector from the amp (CEC) to the Ace headphones (Bluetooth). Before I had the amp, I had a Pioneer receiver and did not have this problem

 

CEC is a “standard” with very loose standards.  Some TVs allow you to switch between a soundbar and Bluetooth all you like, others always default to the soundbar no matter what you try.  This is why we ultimately recommend disabling CEC to get a stable Bluetooth connection. 

Translate
AniDavidAuthor
Contributor I
Jun 11, 2025 1:58 PM UTC

Again, the Pioneer receiver with the same projector worked fine. Even when trying to switch to the internal projector speaker or the optical is not possible. The amp claims the audio input back

Translate
jgatie
Jun 11, 2025 2:12 PM UTC

Again, the Pioneer receiver with the same projector worked fine. Even when trying to switch to the internal projector speaker or the optical is not possible. The amp claims the audio input back

 

As I stated, CEC standards are anything but standard.  Some devices/configurations work fine, others don’t.  Pointing the blame is not really going to solve anything.  Bottom line, if you wish to listen to Bluetooth headphones with your system’s current configuration, turn off CEC. 

Translate
AniDavidAuthor
Contributor I
Jun 11, 2025 3:28 PM UTC

Is it possible to turn off the cec from the amp? The projector turns off the sound when turning off arc- cec

Translate
106rallye
Jun 11, 2025 3:35 PM UTC

It should not turn off the sound streamed via Bluetooth.

Translate
buzz
Grand Maestro
Jun 11, 2025 3:53 PM UTC

Some TV’s and projectors will limit audio format options if CEC (or ‘Anynet’ as SAMSUNG calls it) is disabled. A CEC blocker can work around this, but may introduce some operational annoyances. The blocker will allow the projector to send out its attempts to control everything, but these attempts will not reach the other components. Likewise the other components will not be able to control the projector.

Translate