I have a Sonos ARC connected to a Sony Bravia and use a satellite box. Randomly when I switch on the TV there is no sound. I have to disconnect and reconnect the ARC to get the sound. Any suggestions to eliminate this would be appreciated.
Answered
Random lack of sound on switching on TV with ARC
Best answer by ratty
It’ll be an HDMI-CEC problem. If there’s a setting on the satellite box to disable CEC (it could be called ‘device control’ or some such) then try that. Otherwise there are ‘CEC-less’ adapters available from Amazon to insert into the HDMI connection.
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
It’ll be an HDMI-CEC problem. If there’s a setting on the satellite box to disable CEC (it could be called ‘device control’ or some such) then try that. Otherwise there are ‘CEC-less’ adapters available from Amazon to insert into the HDMI connection.
I would first try a different HDMI cable and then go onto check any other devices connected to the TV’s other HDMI ports, to see if they are stealing the CEC focus. The easiest way to do that is to disconnect each device for a time and see if the issue goes away. If a device is identified as causing the problem, then simply switch off CEC on that one device only, or insert a CEC-Less adapter to stop it intermittently taking control.
(edit:
Also make sure that TV Autoplay is enabled under the Arc’s settings in the Sonos app.
"Receive with simplicity everything that happens to you." - Rashi
Thanks to each of you. I will try out your suggestions in the morning and update you.
Many thanks. JoeKLSA
Hi, I have just checked the CEC setting and it is not enabled. Just tried a different HDMI cable. Now to wait and see if this random error reoccurs.
Thanks everyone
The latest! The system has been working well since my last post. 2 hours ago we watched the news and then switched off the TV. Switched it back on just a few minutes ago and......no sound. Switched all off at mains and when I switched back on, guess what? It worked. So back to square one!
Any other ideas.
Thanks,
Joe
Exact same issue for me, random sound error from TV after switching off or using my Beam in Wifi for music streaming.
Desconnecting and connecting HDMi again can solve the issue sometimes but not always.
I try to control and force TV choice with the app but no sound from the Beam…
Someone already understood the problem ?
One thing I’d double check, beyond the answer given above, is if the TV has any software updates. Once I’ve checked that, I’d reboot the TV by unplugging it from the wall for two minutes.
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.