Skip to main content
Contributor I
December 30, 2023

OPTICAL TO HDMI CONVERTER

  • December 30, 2023
  • 26 replies
  • 9467 views

SONOS PLAYBAR OPTICAL TO HDMI

 

Hi, i’ve tried researching and can’t seem to find my answer. i have a playbar and the optical pin on the tv has broken. Does the hdmi / optical converter cable work? i can’t get it to. Any other options ? 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

26 replies

ratty
December 30, 2023

Are there any outlets on the side? 

Contributor I
December 30, 2023

good question, i’ve just taken a photo and realised there is arc. can i use my optical hdmi converter in that port?

 

ratty
December 30, 2023

No, as has already been pointed out the adapter is from optical to HDMI-ARC. 

ratty
December 30, 2023

Is there a headphone outlet, or any other analog out? 

Contributor I
December 30, 2023

ok…😂… so what do i do! 

controlav
Lead Maestro
December 30, 2023

ok…😂… so what do i do! 

Time for a new TV, based on the backside of this oldie-but-goodie.

Author of the leading independent Sonos apps for Android, MacOS, iOS, Windows and Xbox.
Contributor I
December 30, 2023

Is there a headphone outlet, or any other analog out? 

no …

Contributor I
December 30, 2023

ok…😂… so what do i do! 

Time for a new TV, based on the backside of this oldie-but-goodie.

it’s not even that old!! 

buzz
Grand Maestro
December 30, 2023

Just looking at your photo, the optical output seems to be working. If the optical connector is physically not locking into place, you may be able to fashion some sort of anchor scheme. One thought is to wrap some stiff wire around the optical plug to form a ‘T’, then anchor the ‘T’ to the back of the TV with tape. If you are careful, you could use sheet metal screws to anchor the ‘T’.

Contributor I
December 30, 2023

thanks for that, and funnily enough it’s exactly what i have just done…. the optical port is working, and i have tried to wedge it in place… seems ok