Skip to main content
Contributor I
Dec 22, 2024 8:13 PM UTC
Answered

Google Wifi with Arc Ultra and Amp

I plan to use Arc Ultra with Sonance Architectural in wall speakers for rears (connected to a Sonos Amp). 

Do the Arc and Amp have to be hardwired, or will it run wirelessly (including Dobly ATMOS)?

If I have to hardwire, can I hardwire to a switch that is connected to a Google Wifi access point (that is hardwired to a router). 

 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Airgetlam
AirgetlamAnswer
Dec 22, 2024 8:34 PM UTC

No. In fact, I’d recommend against it, assuming the Arc and the Amp are within wireless (5Ghz) range. Saves an extra routing step when they communicate directly. 

Bruce

4 replies

Airgetlam
AirgetlamAnswer
Dec 22, 2024 8:34 PM UTC

No. In fact, I’d recommend against it, assuming the Arc and the Amp are within wireless (5Ghz) range. Saves an extra routing step when they communicate directly. 

Translate
Bruce
R3an2Author
Contributor I
Dec 22, 2024 8:56 PM UTC

Thanks. Just to confirm, you are saying it does not have to be hardwired and you would recommend against doing so if both are within range?

Translate
Stanley_4
Grand Maestro
Dec 23, 2024 2:55 AM UTC

Wiring Sonos isn't normally needed and can complicate things. Best to skip it unless you have issues that need it.

Translate
Airgetlam
Dec 23, 2024 10:11 AM UTC

Yes, that is what I am saying. Turning ‘off’ the WiFi on these devices, and forcing them to go through the extra step of communicating through the router itself is unnecessary. It adds potential (albeit extremely slight) delay. In some rare cases, that becomes problematic. The original design intent was for them to be wirelessly connected to each other. Why try to go against that?

Translate
Bruce