Skip to main content
rabbidt
Contributor I
November 12, 2022

Existing Sonos system and new Arc don't connect continuously

I have two rooms with Sonos, Office with a Play 5, and Lounge that had a Playbar, and two Sonos One SL surrounds.  They have worked flawlessly for years.  A few months ago I had to disable the lounge system for home repairs and just reconnected the system.  In that time I have also upgraded to a Nest Pro 6e wifi system to replace the previous mesh. 

When reconnecting the lounge system - nothing worked - had to factory reset several times, the app could not find the devices, would fail halfway through etc.  The Playbar kept saying it wasn't getting power or wifi and I spent hours trying to get it to work.  Since I had an upgrade discount, and the room was refurbished, I decided to go ahead and get a Sonos Arc to replace the Playbar.

I have the Arc paired with the two Sonos SL surrounds, but now I can’t tune the system, or check for updates as it can’t connect to the system.  My Amazon Music account can’t connect, but the system plays fine over eArc HDMI, and curiously has no issue connecting to the NAS or playing music on the same network.  Additionally, every other time I open the app, the Lounge de-pairs a surround speaker resulting in  ARC (?+RS).

I have done the following several times and at a loss:

  1. disconnected all speakers, restarted router, plugged all in
  2. factory reset all devices and added back to network
  3. tried setting up another router on a dedicated 2.5ghz band and network and only connected Sonos devices to it
  4. removed/readded all subscription services
  5. checked internet connectivity (all state in google app good to great connectivity)
  6. tried with at least one device connected to ethernet (not feasible for perm solution only testing)

the Play 5 in the office works with no issue. I can play music from Amazon in this room, but the second I switch to the Lounge configuration, it gives errors (below)

this is my network matrix and they are all coloured grey.

  Strength to
F0:F6:C1:24:3B:BF
Lounge (LR)		 Strength to
3A:42:0B:E6:92:1F
undefined		 Strength to
34:7E:5C:D4:53:CC
Office		 Strength to
F0:F6:C1:24:3D:1B
Lounge (RR)		 Strength to
38:42:0B:E6:92:1F
Lounge (LF,RF)
F0:F6:C1:24:3B:BF
Lounge (LR)
Secondary Node
Noise Floor: 0, 0, 0, 0
undefined		   Inbound: 73
Outbound: 69
STP state: forwarding		      
34:7E:5C:D4:53:CC
Office

Noise Floor: 0, 0, 0, 0
undefined		 Inbound: 00
Outbound: 23
STP state: undefined		        
F0:F6:C1:24:3D:1B
Lounge (RR)
Secondary Node
Noise Floor: 0, 0, 0, 0
undefined		   Inbound: 75
Outbound: 71
STP state: forwarding		      
38:42:0B:E6:92:1F
Lounge (LF,RF)

Noise Floor: 0, 0, 0, 0
undefined		 Inbound: 69
Outbound: 73
STP state: undefined		     Inbound: 71
Outbound: 75
STP state: undefined		  

 

The errors I received through setup and triage are:

  1. Unable to play… connection to Amazon Music was lost
  2. Unable to play the selected item
  3. 701
  4. 1001
  5. 1002
  6. 1101

Any assistance would be greatly appreciated.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

18 replies

Ken_Griffiths
Ken_Griffiths
November 12, 2022

Maybe try wiring either the Playbar, or the Office Play:5 to the ‘primary’ Nest Hub/Router to switch all to a SonosNet connection to run alongside the mesh WiFi and see if that resolves your issue. 

    John B
    November 12, 2022

    Ken is right.  You must first stop factory resetting unless someone who knows what they are doing asks you to.  This usually is at best a waste of time.

    It sounds like your network is badly configured and you have (accidentally or deliberately) split your system into two.

    I assume the primary Google device is wired by its WAN port to your router?  Is anything else wired to the router?

    As a temporary measure, move the P:5 (if necessary) to a few feet from the primary Google device and connect the two by Ethernet.

    Your router needs to be in modem only mode.  Is it?  If it does not have such a mode, please disable DHCP in the router settings, and also disable WiFi on the router.

    If you can get that far and answer my questions we can carry on and get this sorted.

      rabbidtAuthor
      Contributor I
      November 12, 2022

      Ken is right.  You must first stop factory resetting unless someone who knows what they are doing asks you to.  This usually is at best a waste of time.

      It sounds like your network is badly configured and you have (accidentally or deliberately) split your system into two.

      I assume the primary Google device is wired by its WAN port to your router?  Is anything else wired to the router?

      As a temporary measure, move the P:5 (if necessary) to a few feet from the primary Google device and connect the two by Ethernet.

      Your router needs to be in modem only mode.  Is it?  If it does not have such a mode, please disable DHCP in the router settings, and also disable WiFi on the router.

      If you can get that far and answer my questions we can carry on and get this sorted.

       

      The router is in modem only mode, with no wireless at the moment, nothing is connected to it aside from the google wifi.

      I have attached the ethernet to the play 5 as suggested, and has updated from WM1 to WM0 as expected.

       

        John B
        November 12, 2022

        That’s great.  Now I am going to ask you to power off your Arc and surrounds.  Then power up the Arc, and factory reset it in the process (trust me).  Leave the surrounds powered off for the moment.

        Then go into the Settings in the Sonos mobile app and choose ‘Add Product’.  If at any point you are asked to choose between  “add to existing system’ and “set up new system”, choose existing system. Do NOT set up new system.

        Follow the prompts and see if you have a unified system.  Your system should contain two “rooms” representing the Arc and the P:5.  Both should show WM;0 in About my System

          rabbidtAuthor
          Contributor I
          November 12, 2022

          The Arc has been reset and during installation received the message ‘ Your Sonos Arc has been added, but may not appear in the System tab.  If so, Unplug the power cord and plug it back in to finish setup from the System tab.’  After doing so it appeared as ‘not registered’ and then added to the Living room.

           

          Then got an error saying it could not find the Arc and that it would need updating.  Quitting the app and opening again and the Arc appears.

           

          Both the Arc and Play 5 are on WM:0

          John B
          November 12, 2022

          Can you play music through them both (individually and grouped)?

          rabbidtAuthor
          Contributor I
          November 12, 2022

          only the play5 - for the arc ‘Unable to connect to Sonos product’

          rabbidtAuthor
          Contributor I
          November 12, 2022

          only the play5 - for the arc ‘Unable to connect to Sonos product’

           

          the arc/living room has now disappeared

          rabbidtAuthor
          Contributor I
          November 12, 2022

          The arc returned by itself an started playing a random song from Amazon music.  I was able to control it and also group with the play 5 and have the same song play over both locations. though how long it would stay connected/visible is a concern.

          Ken_Griffiths
          Ken_Griffiths
          November 12, 2022

          only the play5 - for the arc ‘Unable to connect to Sonos product’

           

          the arc/living room has now disappeared

          Is it still on the network and just missing in the Sonos App - can you ping its IP address? If so, try this:

          1. Remove the WiFi credentials from the Sonos App. See this link: https://support.sonos.com/en-us/article/remove-a-wifi-network-from-your-sonos-system
          2. Try a different SonosNet channel in ‘Settings/System/Network’
          Show more replies
          Terms & ConditionsAccessibility statement