Skip to main content
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Airgetlam
AirgetlamAnswer
March 13, 2025

Sonos does make an Arc soundbar. 

As previously pointed out, Sonos devices are not transmitters of Bluetooth, only receivers. You’d need to have the WiFi turned on on both devices, or have them both connected back to your router with an Ethernet cable to group them. There will still be a 75ms delay between the Arc any any ‘grouped’ room. However, if a pair of speakers is set up as surrounds, and ‘bonded’ to the Arc, there is no delay, but the surround speakers will carry the surround channels, and not the front channels. 

 

Bruce

11 replies

Airgetlam
March 13, 2025

Which ‘bar’? There is no ‘Era’ bar. 

How are you attempting to connect it?

Why are you considering Bluetooth?

Which TV?
 

 

Bruce
Senior Virtuoso
March 13, 2025

If you’re trying to add surrounds, you need two of the same model speakers, as you’ll set up both a Left surround and a Right surround. 

tlsamuelsAuthor
Contributor I
March 13, 2025

I only have one era100. I have a sound bar under my tv. What I want to do is just connect my bar with my one eta 100. Normally I can turn it on then touch the >||button and it coincides with my tv volume.   

Airgetlam
March 13, 2025

Still haven’t answered the questions I asked.

If this is a Sonos soundbar of some type, you should be able to group them.

Note, there is always a slight delay between any Sonos soundbar bar and a grouped room. 

 

Bruce
tlsamuelsAuthor
Contributor I
March 13, 2025

Sorry. Yes a Sonos bar and yes I have linked them together I hit everywhere and apply but when I click on the button >||. It does nothing but beep and the blue light is blinking on the eta 100

106rallye
March 13, 2025

 

Which ‘bar’? There is no ‘Era’ bar. 

How are you attempting to connect it?

Why are you considering Bluetooth?

Which TV?
 

 

These are sensible questions. You could answer them. 
 

If you want your Era to connect via bluetooth to a (non Sonos) soundbar, this won’t work. Soundbars are Bluetooth receivers, not emitters.

tlsamuelsAuthor
Contributor I
March 13, 2025

It’s a Roku tv. I think the bar is an “ark”. I thought I needed Bluetooth on??

Senior Virtuoso
March 13, 2025

It’s a Roku tv. I think the bar is an “ark”. I thought I needed Bluetooth on??

How can you not know what the bar is? And how can you expect help without basic details like that?

 

If there’s any kind of setup guide that came with the bar, read that and follow the instructions it provides. 

tlsamuelsAuthor
Contributor I
March 13, 2025

If you must know I had someone set it up for me in advance before I moved in so never mind. I’ll figure it out!

Airgetlam
AirgetlamAnswer
March 13, 2025

Sonos does make an Arc soundbar. 

As previously pointed out, Sonos devices are not transmitters of Bluetooth, only receivers. You’d need to have the WiFi turned on on both devices, or have them both connected back to your router with an Ethernet cable to group them. There will still be a 75ms delay between the Arc any any ‘grouped’ room. However, if a pair of speakers is set up as surrounds, and ‘bonded’ to the Arc, there is no delay, but the surround speakers will carry the surround channels, and not the front channels. 

 

Bruce