I bought a Xnoogo projector which supports eARC HDMI in port 1. I connected the Sonos beam to the projector with an arc hdmi cable but no sound comes out. Someone please help!
Question
Connecting eArc projector with Sonos Beam
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Near as I can tell from your linked Amazon page, that projector supports ARC, not eARC, but that isn’t an issue, since you’re only connecting a Sonos Beam. What I would try, at least Bedford using that linked cable, is temporarily connecting the Beam with the cable that came with the Sonos, which likely means temporarily moving the speaker. I’m not familiar with the setup on that projector, but make sure in its settings that ARC is turned on, and the cable to the Beam is in the port that is labeled ARC.
If none of that makes a difference, you probably should call Sonos Support directly to discuss it.
Near as I can tell from your linked Amazon page, that projector supports ARC, not eARC, but that isn’t an issue, since you’re only connecting a Sonos Beam. What I would try, at least Bedford using that linked cable, is temporarily connecting the Beam with the cable that came with the Sonos, which likely means temporarily moving the speaker. I’m not familiar with the setup on that projector, but make sure in its settings that ARC is turned on, and the cable to the Beam is in the port that is labeled ARC.
If none of that makes a difference, you probably should call Sonos Support directly to discuss it.
Sadly, I’ve tried the Sonos cord along with 3 other earc hdmi cords and none of them worked. Tech support was no help.
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.