Skip to main content
Contributor I
Nov 19, 2021 10:45 AM UTC
Answered

Beam Gen 2 volume issue: automatically drops to 15%

Beam Gen 2 volume issue: automatically drops to 15%. 

Even if i disconnect the hdmi cable which is hooked on a samsung 43Q67A TV with eARC, playing a stream from TuneIn. 

Volume limit is as default: 100% volume allowed.

When i raise the volume i will see the slider automatically drop to 15% after a few seconds.

Factory reset would not help.

 

Is there a solution?

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
James L.
James L.Answer
Retired Community Staff
Nov 22, 2021 9:58 AM UTC

Hi @RGeurts,

 

The mention of it dropping to 15% is actually very helpful here. I suspect that the Beam is going into failure mode and is limiting its volume to protect the circuitry.

Please submit a system diagnostic and get in touch with our customer care team.

Mark good posts by pressing the like button, and select the best answer on questions you've asked to help others find solutions.

4 replies

Lead Maestro
Nov 19, 2021 7:20 PM UTC

Redo the TV Setup process in the Sonos app:

Disconnect everything from your TV and unplug the TV and Beam from power for a couple of minutes. Go ahead and reboot your router too. Plug the TV and Beam back into power but keep everything else disconnected. Be sure Anynet+ (CEC) is enabled on the TV. Run the TV Setup process in the Sonos app and connect the Beam to the TV when the app instructs you to. When the Beam has been successfully connected, connect your other devices to your TV.

Translate
"Receive with simplicity everything that happens to you." - Rashi
James L.
James L.Answer
Retired Community Staff
Nov 22, 2021 9:58 AM UTC

Hi @RGeurts,

 

The mention of it dropping to 15% is actually very helpful here. I suspect that the Beam is going into failure mode and is limiting its volume to protect the circuitry.

Please submit a system diagnostic and get in touch with our customer care team.

Translate
Mark good posts by pressing the like button, and select the best answer on questions you've asked to help others find solutions.
RGeurtsAuthor
Contributor I
Nov 23, 2021 7:31 AM UTC

Sonos support case NR: 03437430

Phone support and chat support could not help me. :disappointed_relieved:

 

Translate
James L.
Retired Community Staff
Nov 23, 2021 8:57 AM UTC

Sonos support case NR: 

Phone support and chat support could not help me. :disappointed_relieved:

 

Please reach out to them again, I’ve left some notes on the case with further instructions.

It looks like an installer called our support line without being with the product, which essentially means we can’t effectively troubleshoot. Please call again when you’re with the Beam.

Translate
Mark good posts by pressing the like button, and select the best answer on questions you've asked to help others find solutions.