I recently purchased a Samsung Q60BA I connected my Sonos Amp via hdmi arc. I am running the audio through my analog out speakers. I have the delay set at 2000. I turned off all processing on the tv audio and I still have a slight delay. I also grouped my beam to use as a center speaker. Even when the beam is turned all the way down I notice a small delay through the analog connected speakers. Any suggestions?
Answered
audio video sync
Best answer by GuitarSuperstar
In the TV settings, set the HDMI-eARC Mode setting to OFF and set Digital Output Audio Format to Pass-Through.
There is nothing you can do about the delay on the Beam. You will always experience a delay when grouping speakers to the Amp when playing TV audio.
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
In the TV settings, set the HDMI-eARC Mode setting to OFF and set Digital Output Audio Format to Pass-Through.
There is nothing you can do about the delay on the Beam. You will always experience a delay when grouping speakers to the Amp when playing TV audio.
BEAM is not designed to be used this way. You’ll always have a slight delay when anything is Grouped with an AMP or soundbar playing TV audio.
I adjusted the TV settings for HDMI arc to off and that got it closer (I’m happy with that). The “through put” audio is not a available to select. I’m not as concerned about the beam. It’s not terribly off. I anticipated to have a small delay in the beam. I assume this is the closest I will get and it’s pretty close. Thanks guys!
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.