Skip to main content
Contributor II
Mar 11, 2025 1:16 AM UTC
Answered

ARC/ERA300 Is Sonos planning to add the option to easily switch from atmos to stereo, vice versa?

ARC/ERA300 Does Sono is planning to add the option in their app to easily switch from atmos to stereo, vice versa?

 

Being audiophile, I really enjoy the era 300 power. The only show stopper to buy the arc ultra is disabeling the front driver of the era 300 when set in surround mode With arc ultra

 

So, when I listen music I would be like to fully able the era 300

 

But it seems setting up almos then desetting it and setting stereo seem studious 

 

Does Sono is planning to add the option to easily switch from atmos to stereo, vice versa?

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
jgatie
jgatieAnswer
Mar 11, 2025 1:05 PM UTC

The two configurations are very different (direct 5 GHz private ad-hoc network vs 2.4 GHz regular wireless) and require a bit of time to reconfigure the radios and perform the handshakes between the two devices.  This is why adding/removing surrounds takes the extra time it does, and there’s no real way to speed the process up. 

12 replies

Airgetlam
Mar 11, 2025 1:49 AM UTC

Seems unlikely. Sonos has fielded this type of request since the release of the PLAYBAR, and hasn’t done it yet. 

Translate
Bruce
ProbillaAuthor
Contributor II
Mar 11, 2025 1:53 AM UTC

Thanks Bruce

Translate
jgatie
jgatieAnswer
Mar 11, 2025 1:05 PM UTC

The two configurations are very different (direct 5 GHz private ad-hoc network vs 2.4 GHz regular wireless) and require a bit of time to reconfigure the radios and perform the handshakes between the two devices.  This is why adding/removing surrounds takes the extra time it does, and there’s no real way to speed the process up. 

Translate
ProbillaAuthor
Contributor II
Mar 11, 2025 3:03 PM UTC

Thanks jgatie

 

I have brought this issue to the attention of Sono. Hopefully, over time they will see it a real issue to adress

 

It is a bit sad to use the era 300 as surround and not to their full capacity (with the front driver) unless we go through this process presented

Translate
ProbillaAuthor
Contributor II
Mar 11, 2025 3:11 PM UTC

Thanks Raxaq for your input

 

Hopefully, enough users will bring this issue to their attention

Translate
jgatie
Mar 11, 2025 3:35 PM UTC

Thanks jgatie

 

I have brought this issue to the attention of Sono. Hopefully, over time they will see it a real issue to adress

 

It is a bit sad to use the era 300 as surround and not to their full capacity (with the front driver) unless we go through this process presented

 

As stated. there’s nothing which can be addressed.  Reconfiguration takes time, and doesn’t lend itself to a quick toggle between the two.  

Translate
Avid Contributor II
Mar 18, 2025 11:11 PM UTC

Reconfirming taking a while should not be an issue if it is a simile button in the app to toggle between modes?

Translate
Airgetlam
Mar 18, 2025 11:28 PM UTC

That is not the way the process works. It isn’t a simple on/off process, as I understand it, there’s a ‘find’, then ‘negotiation’, after which there is a connection. Not to mention the change between ‘peer’ and ‘child’ status, and the time it takes to change that. And the addition of the new ‘rooms’ to the Sonos controller, removal (which may be automatic and not a timing issue) of the associated TruePlay tuning. It’s a significant change in the firmware running the speaker, the connection to your router changing to the soundbar, possible change in frequencies, a whole slew of things that are challenging to occur all in one button push. 
 

 

Translate
Bruce
Trending Lyricist I
Mar 20, 2025 11:47 AM UTC

The configuration might be different and the process to get to each configuration might take time but I see no reason why Sonos couldn’t have multiple configurations. 

Logically speaking, Sonos speakers could use multiple profiles. Each profile containing a different configuration so e.g. you could have a stereo profile with just two speakers and a full home theatre profile where all speakers are included. When configuring each profile the same process is used to make sure the configuration is possible and then saved to a profile. 

Yes, significant changes but once saved into separate profiles it wouldn’t have to go through the initial process and could just be switched to that profile. My KEF speakers allow for multiple EQ profiles, not quite the same thing but similar concept.

Translate
jgatie
Mar 20, 2025 12:33 PM UTC

The configuration might be different and the process to get to each configuration might take time but I see no reason why Sonos couldn’t have multiple configurations. 

Logically speaking, Sonos speakers could use multiple profiles. Each profile containing a different configuration so e.g. you could have a stereo profile with just two speakers and a full home theatre profile where all speakers are included. When configuring each profile the same process is used to make sure the configuration is possible and then saved to a profile. 

Yes, significant changes but once saved into separate profiles it wouldn’t have to go through the initial process and could just be switched to that profile. My KEF speakers allow for multiple EQ profiles, not quite the same thing but similar concept.

 

You don’t get it.  And I’m not going to waste my time explaining again.  Suffice to say that this type of toggle feature has been asked for since the first Playbar over a decade ago, and Sonos has stated it is not possible.  

Translate