Skip to main content
Contributor I
Aug 5, 2023 7:24 PM UTC
Answered

What is the proper way of connecting to the TV using Amp (2 ceiling speakers) + Arc.

As the title states, I have a new Samsung TV that is currently connected to the AMP via a HDMI cable.  The AMP has 2 ceiling speakers connected via Speaker wire.

 

The Arc is wirelessly connected to the Amp.  There is a slight audio delay, so I ended up turning down the AMP (Ceiling speakers) and mainly used the Arc.


There is a SVS Sub that is directly connected to the AMP as well. 

Should I connect the ARC directly to the TV?  Then somehow integrate the AMP as surrounds?

 

Thanks

 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
106rallye
106rallyeAnswer
Aug 5, 2023 8:15 PM UTC

Sorry to say that from the sound perspective, as well as from a Sonos sytem perspective, you seem to be going at this the wrong way.

  1. In ceiling speakers are not really made for TV or home cinema use. They are meant to be used for (background) music. For TV viewing the sound from your speakers should appear to originate from your TV. With speakers built into the ceiling this is not achievable. The Amp (when used stand alone without a soundbar) is meant to drive two front speakers and compute a “phantom” center channel. You seem to have connected four in ceiling speakers, making the sound from the Amp coming from the wrong points.
  2. The Arc should connect to the TV via HDMI and be put a couple of inches under the TV screen. If you want to you could then ad the Amp to power the surround rears - disconnect the front in ceilings. If so they are also probably also set too high but for surrounds this matters less.
  3. You could also only use the Arc for TV viewing and use the Amp for music only, if you want to you could “group” the Amp with the Arc. Music will sound right, TV sounds will have a delay on the Amp.
  4. The Sub can either be connected to the surround set up mentioned above (under 2), or you’d have to choose if you want to connect to the Amp or the Arc. It cannot be connected to two “rooms” in the Sonos app.

I can see you are limited in choices where to put your TV, but above a fireplace is not a good place to put a TV. It is too high up for viewing (which is your choice of course) but you could also run into problems caused by the heat - problems for the Arc or the TV.

15 replies

106rallye
106rallyeAnswer
Aug 5, 2023 8:15 PM UTC

Sorry to say that from the sound perspective, as well as from a Sonos sytem perspective, you seem to be going at this the wrong way.

  1. In ceiling speakers are not really made for TV or home cinema use. They are meant to be used for (background) music. For TV viewing the sound from your speakers should appear to originate from your TV. With speakers built into the ceiling this is not achievable. The Amp (when used stand alone without a soundbar) is meant to drive two front speakers and compute a “phantom” center channel. You seem to have connected four in ceiling speakers, making the sound from the Amp coming from the wrong points.
  2. The Arc should connect to the TV via HDMI and be put a couple of inches under the TV screen. If you want to you could then ad the Amp to power the surround rears - disconnect the front in ceilings. If so they are also probably also set too high but for surrounds this matters less.
  3. You could also only use the Arc for TV viewing and use the Amp for music only, if you want to you could “group” the Amp with the Arc. Music will sound right, TV sounds will have a delay on the Amp.
  4. The Sub can either be connected to the surround set up mentioned above (under 2), or you’d have to choose if you want to connect to the Amp or the Arc. It cannot be connected to two “rooms” in the Sonos app.

I can see you are limited in choices where to put your TV, but above a fireplace is not a good place to put a TV. It is too high up for viewing (which is your choice of course) but you could also run into problems caused by the heat - problems for the Arc or the TV.

Translate
zmann7Author
Contributor I
Aug 5, 2023 8:24 PM UTC

Ok, sounds AMAZING… I just wish the 12” SVS Sub which is connected to the AMP directly would work.  Do I have to go with a Sonos sub now? :)  

Translate
zmann7Author
Contributor I
Aug 5, 2023 8:26 PM UTC

Sorry to say that from the sound perspective, as well as from a Sonos sytem perspective, you seem to be going at this the wrong way.

  1. In ceiling speakers are not really made for TV or home cinema use. They are meant to be used for (background) music. For TV viewing the sound from your speakers should appear to originate from your TV. With speakers built into the ceiling this is not achievable. The Amp (when used stand alone without a soundbar) is meant to drive two front speakers and compute a “phantom” center channel. You seem to have connected four in ceiling speakers, making the sound from the Amp coming from the wrong points.
  2. The Arc should connect to the TV via HDMI and be put a couple of inches under the TV screen. If you want to you could then ad the Amp to power the surround rears - disconnect the front in ceilings. If so they are also probably also set too high but for surrounds this matters less.
  3. You could also only use the Arc for TV viewing and use the Amp for music only, if you want to you could “group” the Amp with the Arc. Music will sound right, TV sounds will have a delay on the Amp.
  4. The Sub can either be connected to the surround set up mentioned above (under 2), or you’d have to choose if you want to connect to the Amp or the Arc. It cannot be connected to two “rooms” in the Sonos app.

I can see you are limited in choices where to put your TV, but above a fireplace is not a good place to put a TV. It is too high up for viewing (which is your choice of course) but you could also run into problems caused by the heat - problems for the Arc or the TV.

Thanks for this detailed reply, will study it soon.   I may grab a few Sonos 1’s and use those for sourround and then dedicate the AMP to music only

Translate
zmann7Author
Contributor I
Aug 5, 2023 8:39 PM UTC

I’ve got my Sonos ARc mounted upside down to access the buttons...how do I switch the R and L speakers?   

EDIT:  Doesn’t appear to be possible.  Flipping it now.

Translate
Stanley_4
Grand Maestro
Aug 6, 2023 2:21 AM UTC

Upside down mounting also really messes up the Arc’s Atmos height sounds.

Translate