Skip to main content
Contributor II
Oct 27, 2022 11:37 PM UTC
Answered

Volume increases on arc

I have an arc grouped with two five's The arc out of the blue volume starts to increases and I know it is the arc as I hear the clicks sound coming from the arc. Even after using the remote to lower it continues to increase. The remote I fine including the batteries. It is only after unplugging the arc it clears.

Has anyone run into issue.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Airgetlam
AirgetlamAnswer
Oct 27, 2022 11:41 PM UTC

While this is happening, have you submitted a system diagnostic , or at least within 10 minutes, and called Sonos Support to discuss it?

If I were to guess, it’s likely a “stuck” button, on either the Arc, or a device that is running the controller. There should be information in that diagnostic that Sonos can read and tell you where the volume command is coming from. 

Bruce

5 replies

Airgetlam
AirgetlamAnswer
Oct 27, 2022 11:41 PM UTC

While this is happening, have you submitted a system diagnostic , or at least within 10 minutes, and called Sonos Support to discuss it?

If I were to guess, it’s likely a “stuck” button, on either the Arc, or a device that is running the controller. There should be information in that diagnostic that Sonos can read and tell you where the volume command is coming from. 

Translate
Bruce
PetrockAuthor
Contributor II
Oct 27, 2022 11:45 PM UTC

Thanks. How do I go about submitting a system diagnostic?

Translate
Airgetlam
Oct 27, 2022 11:46 PM UTC

Click on the underlined words “system diagnostic” in my post. It will take you to an FAQ that explains how to do so. 

 

Edit: Apologies...you’re most welcome :)

Translate
Bruce
Ken_Griffiths
Oct 27, 2022 11:57 PM UTC

I have a further thought to consider - if you turn off the touch controls on the Arc in the Sonos App ‘room’ settings, does that resolve the issue? If so, and the TV is perhaps very close to the Arc, maybe try moving the Arc slightly further away from the TV - I’m thinking the controls might be being affected by some kind of electro-magnetic field emitting from the TV (perhaps 🤔?)

Translate
PetrockAuthor
Contributor II
Oct 28, 2022 10:33 AM UTC

Thanks Ken_Griffiths

I'll give it try but don't think that is the issue as I've had this set up for about a year with no issues. It only recently started to happen. It happens infrequently. 

Translate