Skip to main content
Contributor I
Sep 2, 2023 11:41 PM UTC
Answered

TV disconnecting from Beam and 2 x one surrounds

Hi there

2 days ago my Samsung tv stopped sending sound through my Beam and surrounds. 
I’ve tried all the previous suggestions such as TV software update, unplugging all cables from both sides etc. the App says it’s connected to the tv but still no sound. 
If I reset / unplug everything as above then the sound comes through again but once I turn the Tv off the lights on all speakers start to flash white and  it’s not recognised again once I turn things on again? 
any help would be appreciated before I end up resetting all speakers to factory reset 

thanks Dan 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Corry P
Corry PAnswer
Sonos Staff
Sep 8, 2023 8:50 AM UTC

Hi @Dank77 

Welcome to the Sonos Community!

Reports are that a recent Samsung software update to multiple models has introduced an issue whereby Dolby Digital + (and in some cases Dolby Digital too) won’t play on external audio devices.

Some users report that they are able to get TV audio again by restricting the TV to play Dolby Digital or PCM audio formats.

I recommend you contact Samsung support for assistance.

I hope this helps.

"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein

13 replies

buzz
Grand Maestro
Sep 3, 2023 12:32 AM UTC

Don’t Factory Reset the SONOS.

With respect to the TV are you actually removing power when you turn it OFF, or are you using its tempt to put the TV into standby?

Is BEAM wired to the network?

Translate
AjTrek1
Sep 3, 2023 12:38 AM UTC

With respect to power. Are all components (TV and Beam) plugged into the same power strip?

Translate
Together Everyone Achieves More = T.E.A.M.
Dank77Author
Contributor I
Sep 3, 2023 10:56 AM UTC

Thanks for the reply’s 

the tv is wall mounted with both the tv and Beam plugged into a wall mounted power point behind I’ve left both plugged in but turned the socket off at each when trying to reset? 
the beam is hard wired to the network with cat6 cabling. 
its been working fine for the last 3 years until 2 days ago? 

Translate
AjTrek1
Sep 3, 2023 1:35 PM UTC

OK…is the power point you speak of some type of smart switch wherein turning on the TV triggers power to it and the Beam? If so therein lies your problem. Please post a response.

Translate
Together Everyone Achieves More = T.E.A.M.
Dank77Author
Contributor I
Sep 3, 2023 10:16 PM UTC

Hi there

no it’s just a regular PowerPoint, the whole setup has been working fine. It’s as if an auto update on either the tv or sonos has a glitch in it? 
it shows up in the app as being connected to the tv, makes the chime through the speaker that it’s connected but then still no sound from anything being played from the tv.

might try and switch over the hdmi to ruel that out but that means getting the tv off the wall

Translate
Dank77Author
Contributor I
Sep 4, 2023 5:04 AM UTC

no it’s just a regular PowerPoint, the whole setup has been working fine. It’s as if an auto update on either the tv or sonos has a glitch in it? 
it shows up in the app as being connected to the tv, makes the chime through the speaker that it’s connected but then still no sound from anything being played from the tv.

might try and switch over the hdmi to ruel that out but that means getting the tv off the wall

Translate
Dank77Author
Contributor I
Sep 4, 2023 5:05 AM UTC

 

Translate
Lyricist I
Sep 4, 2023 8:43 AM UTC

The issue described and the timing of it is exactly the same as what I’m experiencing with my Sono Amp and the tv audio connection through the Amp.

Is this due to recent updates?

Translate
Dank77Author
Contributor I
Sep 4, 2023 9:19 AM UTC

Is yours a Samsung Tv?

Translate
Lyricist I
Sep 4, 2023 5:35 PM UTC

Yes! and I also tried reset everything, deleted the app to clear all data, and set up the amp like it’s brand new. And the issue still persists that the audio would only work temporarily and would stop coming through again.

 

Right now I just can’t use the amp at all cuz I can’t be resetting and unplugging replugging multiple times per day just for it to work temporarily. Extremely frustrating and you are not alone. Hoping there will be a solution soon.

Translate