Skip to main content
Trending Lyricist I
Jun 30, 2022 9:59 PM UTC
Answered

Surrounds Flash Green

I have an arc and have just purchased 2 Sonos one SL's to try and create a surround system. Initially,  all went well, everything was connected and working fine. I then became aware there was no sound coming out of the ones and they had  a flashing green light. I factory reset them,  re-added them to Sonos added them as surround speakers and they instantly flash green as soon as they are set up. I have totally factory reset the entire system and yet as soon as they become surround speakers they flash green. Any help would be gratefully accepted.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Corry P
Corry PAnswer
Sonos Staff
Jul 7, 2022 9:54 AM UTC

Hi @HarryTheB 

Welcome to the Sonos Community!

If you still have this problem I recommend you get in touch with our technical support team, who have tools at their disposal that will allow them to give you advice specific to your Sonos system and what it reports. As both surrounds speakers are behaving the same, I believe efforts should be focused on the Arc. Other than after being factory reset, the only time any Sonos speakers should flash green is when they are configured as surrounds and are disabled. For some reason, the Arc seems to be forcing this.

I hope this helps.

 

"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein

33 replies

Airgetlam
Aug 16, 2022 3:18 PM UTC

Settings>System>(Room name with surrounds)>Scroll down to Hardware>Status Light - off (affects all speakers in that ‘room’)

Translate
Bruce
Contributor I
Aug 17, 2022 6:48 AM UTC

Settings>System>(Room name with surrounds)>Scroll down to Hardware>Status Light - off (affects all speakers in that ‘room’)

When the status light is set to OFF. The ARC & surrounds white LED’s turn OFF.

However if the volume is muted the ARC & surrounds green LEDs come ON.

If the status light is OFF and the surrounds are set to OFF then the green LEDs will flash ??

Translate
Airgetlam
Aug 17, 2022 4:55 PM UTC

Oh, my apologies. Yes, I agree, when muted, the speakers have always given an indication that they are muted, and to my knowledge, that can’t be turned off. When that’s an issue for me, I usually turn them down to the lowest level without muting it, and usually, because I’m listening to something else, any low level sound that might be coming from them is lost. But then again, my surrounds tend to be “behind” me, so I don’t really notice that light, unless I’ve darkened the room for some reason, and then turn my head. I have, for other LEDs such as the microphone, covered it with a piece of electrical tape, or a dot from LightDims. 

Not ideal solutions, in any case, but I think Sonos is more concerned about reducing support calls about how the speakers don’t work, when in fact they’re just muted. 

For your your third scenario, I’ve never had a time where I wanted to turn off the surrounds. In fact, I have them set to “Full” rather than “Ambient”, so that when playing music, they act as stereo speakers, and not just supporting to the sound coming from my Arcs.

Translate
Bruce