Skip to main content
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Airgetlam
AirgetlamAnswer
Jul 4, 2022 4:28 PM UTC

Does this particular Humax STB have an optical out? If so, yes….however, most cable boxes never really turn off, they depend on the TV set to be turned off, so your PLAYBAR would likely be playing sound all the time.

Bruce

16 replies

Ken_Griffiths
Jul 4, 2022 8:17 PM UTC

The Humax is a Freesat/PVR box and the TV is an LG 55UN7300. The User Manuals are very basic and do not give much detail. I bought a used Playbar on Ebay and have since bought used Sonos Sub. and two Play 1’s. It sounds super, using a BluRay player as source but nothing special via TV. Maybe I should try some specific music on the TV to see if improves things.Cheers.    (Nadal has just won the third set, so I may be in with a chance1)

The TV supports Dolby Digital 5.1 via Optical/ARC. See this link below.. I would wire the Playbar to the TV and set the TV audio out to use DD 5.1

https://www.rtings.com/tv/reviews/lg/un7300

Translate
Contributor I
Jul 4, 2022 10:50 PM UTC

Thank you Ken. I’ll try that and hope it works…..Thanks to all for your interest...Richard 33

Translate
Senior Virtuoso
Jul 5, 2022 8:51 AM UTC

It sounds super, using a BluRay player as source but nothing special via TV. 


A lot of tv is broadcast in stereo or DD 2.0 - ie only 2-channel rather than full DD 5.1 surround so you will notice differences. The app will tell you what the Playbar is receiving. 

Translate
Contributor I
Jul 5, 2022 9:05 AM UTC

Thank you nik9669a,  I had noticed that, on TV, the rear speakers (Play 1’s) hardly made any sound at all and I then read an article saying that most TV Optical outlets were stereo only. The User Manuals do not say anything useful and I was asking the Forum for help. I have gone through BluRay, Freesat and TV this morning set the audio outputs correctly. I am happy, now, that this is as good as it gets and thank everyone for their help...Richard 33

Translate
ratty
Jul 5, 2022 11:06 AM UTC

The User Manuals do not say anything useful 

Really? From the relevant section of the manual I linked above:

 

Translate
Senior Virtuoso
Jul 5, 2022 12:24 PM UTC

Thank you nik9669a,  I had noticed that, on TV, the rear speakers (Play 1’s) hardly made any sound at all and I then read an article saying that most TV Optical outlets were stereo only. The User Manuals do not say anything useful and I was asking the Forum for help. I have gone through BluRay, Freesat and TV this morning set the audio outputs correctly. I am happy, now, that this is as good as it gets and thank everyone for their help...Richard 33

Yup. Even when you watch an HD tv channel, it’s often only a DD 2.0 signal they transmit. So, no rear speaker data to send. But, optical cables can send 5.1 signals. It’s the broadcast signal, not the cable, that dictates the characteristics. 

Translate