Skip to main content
Enthusiast II
July 29, 2018

Sonos doesn’t really do “5.1”

Before you buy any SONOS equipment to achieve a 5.1 setup please consider this: a Denon AVRX2400 AV Amp, Elac CINEMA 5.1 speaker system, all cables professionally installed behind the walls gives you true home cinema with all the surround sound codecs you could ever want with no cables showing for way less than £1000 (see Richer Sound web site for prices). Or spend £1700 on a SONOS setup and get stereo or Dolby Digital only plus you may have to buy a new DVD player to play your UHD DVD’s, a HDMI Switch then deal with lip sync issues etc, etc.

SONOS do speakers, great speakers, but only for music. They are stealing money from people wanting 5.1 for their TV. The system I suggest costs at least £700 less, hides all the wires (what we all want) and sounds much, much better. Go mad, stick a couple of speakers in the ceiling and get real Dolby Atmos for £150 more and still save yourself £550. I have begged SONOS to tell me if they are developing a surround sound product with HDMI and more choice of listening eg DTS, Dolby X etc but they point blank refuse to discuss future products stating they are catering for the “modern listener”. That put me in my place. SONOS remind me of great companies who made world class products like Blackberry, Blockbuster, Compaq and SAAB, just a minute, they all went out of business because they didn’t produce what their customers wanted at a competitive price (no pedants please, I know there were other factors which meant these companies went bust, I am just illustrating a point). Are SONOS going down the same route? Think about it while you are watching your new laser disc.

I would be interested to hear any arguments against my proposed SONOS alternative system.
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

150 replies

Legnum Nick
Prodigy III
December 6, 2018
I missed this thread the first time round.

I am considering a Sonos 5.1 system for my Living Room. It will take me a while to get there so any other revelations from me won't be imminent, but I have two fundamental thought directions for arriving at the conclusion that a Sonos system for the Living Room will be my preferred solution.

1. I already have a home theatre system in my Study. I have a Kef 5.1 speakers system being fed by a powerful, if a little dated, receiver. The receiver has plenty of connections for my blu-ray, PS4, PC, TV etc. It also has a tape loop so I have a Connect attached to it. Therefore my study is a Sonos zone, with a line in that can stream all of the inputs I mentioned above. The receiver can decode plenty of different formats and has plenty of setup options to tune the sound if I need to. The TV is in the middle of the wall with the 5 channels pretty well optimised from a position point of view. Therefore, if I need to watch something specific in a home theatre envioronment, I already have the ability.
2. My living room is not a home theatre room. The TV is in the corner and my wife wants aesthetics and convenience of layout to be the foremost considerations. Most TV watched in this room is just TV, not blockbuster action movies. Having the TV in the corner means a soundbar is a sensible option as speaker placement for stereo seperation is not really achievable. Through these forums I am aware of the DTS issues etc but on the whole this is not going to be an issue. I already have two play 1s in the living room, so the surrounds are effectively already in the right room.

In summary? I would tend to agree with the OP that a Sonos theatre system is not perfect. To be frank, I'm not sure any system is. But whilst I would agree that if you want versatile home theatre then don't buy Sonos, I don't currently agree that Sonos 5.1 is not worth considering. I'd also suggest to the OP that the £500 saving from not having a Sonos 5.1 system would be well spent on buying a Connect - that way you get the best from everything - versatile inputs for your home theatre and more options on inputs for your Sonos listening around the home.
Translate
melvimbe
December 6, 2018
Related and happy to split this off but does Sonos’ recent release of its Amp with HDMI ARC and a sub jack change this discussion at all? Obviously you’re buying or using additional speakers at that point but does it change things in terms of Sonos’ ability to deliver 5.1? I wasn’t clear on where the other 3 come from in that setup.


I'd say that is not the best thread on the subject by a long shot. There is some true statements made regarding what Sonos does with home theatre, but a lot of opinions and garbabe as well.

Regarding the Amp though, it doesn't really change the 'maximum' home theatre setup you can achieve in terms of what audio formats are supported, it just changes how you arrange different products and speakers to get there...if that makes sense. The HDMI ARC connection on the Beam and the Sonos Amp is an improvement over the optical connection in terms of CEC controls and allowing the TV to send the best audio format to be sent to Sonos. So if the video source has dolby digital 5.1 for example, the TV will pass the audio in that format. If the source is DD+ or Dolby Atmos, the TV will pass dolby digital 5.1 to Sonos. If the source is stereo PCM, Sonos will get stereo. If the source is DTS, some TVs (few) could transcode the signal to DD 5.1, but I doubt it. (There are some game consoles, blue ray players, cable boxes etc that will transcode).. So essentially, Sonos is still DD 5.1 as a result, but the posslbie sources is a bit broader.

As a general rule, most of what you would stream is going to be stereo or one of the dolby formats. Blu-ray is likely going to be in DTS formats. So if you get a blu ray player that can covert DTS to dolby, you're covered for most everything. I use an xbox one for this.

Regarding your 'other 3' comment, the Amp itself will produce stereo left and right and phantom center channel. That gives you '3' (you get the same if use a Beam/Playbar/Playbase). You can attach or sub, or wireless connect a Sonos Sub for the '.1'. So the most you can get with just the Sonos Amp and your other speakers is 3.1. To add the rear surrounds to get the remaining 2, you can use a pair of Sonos speakers, or bond a second Amp to drive your own speakers for surround.

There are also audio formats that allow for a greater number of speakers than 5 plus a sub. 7.1, 9.1, 9.2.2, etc. Sonos does not go beyond 5.1.
Translate
Danny
Renowned Enthusiast I
December 6, 2018
Before you buy any SONOS equipment to achieve a 5.1 setup please consider this:
blah, blah, blah...


It is odd that you think people here are not aware that AV receivers and all the associated cables etc exist. Alot of people here have had that mess and know the pros and cons. Even odder you felt it necessary to post this.
Thanks Captain Obvious.
Translate
Avid Contributor I
December 6, 2018


I'd say that is not the best thread on the subject by a long shot. There is some true statements made regarding what Sonos does with home theatre, but a lot of opinions and garbabe as well.



Yea, i gathered that after reading through it a bit.

Regarding the Amp though, it doesn't really change the 'maximum' home theatre setup you can achieve in terms of what audio formats are supported, it just changes how you arrange different products and speakers to get there...if that makes sense. The HDMI ARC connection on the Beam and the Sonos Amp is an improvement over the optical connection in terms of CEC controls and allowing the TV to send the best audio format to be sent to Sonos.


I see. So better than just an optical connection.

So if the video source has dolby digital 5.1 for example, the TV will pass the audio in that format. If the source is DD+ or Dolby Atmos, the TV will pass dolby digital 5.1 to Sonos. If the source is stereo PCM, Sonos will get stereo. If the source is DTS, some TVs (few) could transcode the signal to DD 5.1, but I doubt it. (There are some game consoles, blue ray players, cable boxes etc that will transcode).. So essentially, Sonos is still DD 5.1 as a result, but the posslbie sources is a bit broader.

As a general rule, most of what you would stream is going to be stereo or one of the dolby formats. Blu-ray is likely going to be in DTS formats. So if you get a blu ray player that can covert DTS to dolby, you're covered for most everything. I use an xbox one for this.


I think I'm following that. I have a PS3 for blu-ray. Would assume it delivers audio similar to Xbox one?

Regarding your 'other 3' comment, the Amp itself will produce stereo left and right and phantom center channel. That gives you '3' (you get the same if use a Beam/Playbar/Playbase).


Ah ok. Is that something has to be enabled or does SOnos just do that on its own with any 5.1 signal?

You can attach or sub, or wireless connect a Sonos Sub for the '.1'. So the most you can get with just the Sonos Amp and your other speakers is 3.1. To add the rear surrounds to get the remaining 2, you can use a pair of Sonos speakers, or bond a second Amp to drive your own speakers for surround.


I see. I was leaning towards the latter. Would a pair of Sonos Play:1s handle that? Does Sonos actually do 5.1 at that point or is it more of an approximation?

There are also audio formats that allow for a greater number of speakers than 5 plus a sub. 7.1, 9.1, 9.2.2, etc. Sonos does not go beyond 5.1.


Right, that makes sense. Thanks!
Translate
melvimbe
December 6, 2018


I think I'm following that. I have a PS3 for blu-ray. Would assume it delivers audio similar to Xbox one?


I can't say. Check the audio setting for your PS3 and see if output in dolby digital is an option.


Ah ok. Is that something has to be enabled or does SOnos just do that on its own with any 5.1 signal?


The phantom channel speaker is the standard, and as it understand it, can't be turned off. I haven't had a chance to set mine up yet, but this is what I was told when it was introduced on this forum (I asked)


I see. I was leaning towards the latter. Would a pair of Sonos Play:1s handle that? Does Sonos actually do 5.1 at that point or is it more of an approximation?


The play:1s are excellent for surround speakers. It's technically 4.1, because of the phantom center channel, but nothing of the channels are simulated (programmatically generated) when you receive dolby digital, of that's what you mean by an approximation.
Translate
Danny
Avid Contributor I
December 8, 2018

The play:1s are excellent for surround speakers. It's technically 4.1, because of the phantom center channel, but nothing of the channels are simulated (programmatically generated) when you receive dolby digital, of that's what you mean by an approximation.


I see. I just noticed in the Room Settings that you can specifically add rear speaker as opposed to just additional speakers in a group. Thanks for the help! It doesn't sound like this settles this thread or anything but I'm excited to try out this configuration with the new Amp.

One more question here: is it possible to add a Playbar for the front-center channel explicitly? I guess at that point, you would want to turn off the phantom channel on the Amp if such a thing is possible.
Translate
djsgrantAuthor
Enthusiast II
December 10, 2018
Just to break down a few more of the bombs thrown in this thread:

"They are late to the market with Alexa, Siri etc"

They were the first 3rd party multi-room speaker to use Alexa, and the first to use Airplay 2 (which can be activated by Siri).

"no HDMI"

The Beam not only has HDMI, it has HDMI-ARC and CEC.


When I started this thread the Beam hadn’t been announced so there was no HDMI.
Translate
David
melvimbe
December 10, 2018

When I started this thread the Beam hadn’t been announced so there was no HDMI.


Yes it was. The thread was started 4 months ago, probably early August. The Beam started selling in late June.

The Beam was mentioned in the 2nd post of this thread. You referred to the Beam yourself in your 3rd post in this thread, also dated 4 months ago. The post you're currently replying to is also 4 months ago.

I agree with the general sentiment though. This thread is old and really shouldn't be considered to be current information anymore.
Translate
Danny
jgatie
December 10, 2018


When I started this thread the Beam hadn’t been announced so there was no HDMI.


First post in this thread - 4 months ago, at max that means August 2018,

Beam released - June 6th, 2018.

Care to try again?

How about your claim "They are late to the market with Alexa, Siri etc"? When they are the very first to the market, exactly how late is that?
Translate
djsgrantAuthor
Enthusiast II
December 10, 2018
Pointless discussion. Buy what you like.

So you joined it why???
Translate
David