Skip to main content
Contributor I
Nov 20, 2020 10:41 PM UTC
Answered

Sonos and Sony XBR55A8H volume control problem

Problem: My Sony TV and Sonos system work very well with the Sonos system (Beam, Sub Gen 3, pair Sonos Ones) connected through HDMI Arc. Unfortunately,  the TV/Sonos volume always jumps 2 levels at a time when using the remote. eg 2, 4, 6, 8…

When I unplug the Sonos System and switch to the Sony to TV sound only, the TV volume adjusts properly, eg: 1, 2, 3, 4...

I am using the same remote and have tried several different remotes but get the same incorrect result.

I have also tried adding each piece of my Sonos system, checking volume control as I add each piece, but the result does not change, 2, 4, 6, 8...

Question: Is there a way to stop the volume jumping 2 steps at a time so I have a finer control of the system volume? I love the Sonos system but would like to improve the volume adjustment with the TV remote.

Thanks for any help.

 

 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Corry P
Corry PAnswer
Sonos Staff
Feb 26, 2021 11:39 AM UTC

Hi @Al_6a & @Jd1304 

Is this still an issue for you? It is expected behaviour, ie. normal, but you can obtain finer volume control by limiting your maximum volume for that room in the Sonos app. See our page on Setting a volume limit on Sonos players for details. This would not change the numbers you see on the screen, but each step of 2 would be a finer step in actual volume from your Beam. Setting this to 50% would result in a volume step of 1 for each 2 indicated on the TV. It does of course also limit the maximum volume available from your Beam.

I hope this helps.

"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein

24 replies

buzz
Grand Maestro
Nov 20, 2022 7:53 AM UTC

One possible work around would be to disable Bravia Sync on the TV and setup your remotes to use IR to control the soundbar’s Volume. There is a potential issue with this and I can’t check this because I don’t have a SONY TV. Some TV’s will not support advanced audio, such as Dolby ATMOS without Bravia Sync. If disabling Bravia Sync causes issues, then add an “HDMI CEC blocker” to the HDMI ARC connection between the TV and soundbar. Another workaround would be to use the optical connection between TV and soundbar, however this will not support advanced audio formats.

Overall, CEC is a mess. There is room to interpret the standard and each manufacturer has their own unique interpretation. When there is a spat such as this, one manufacturer pushes the problem onto the other. If manufacturer ‘A’ creates a special workaround to accommodate manufacturer ‘B’ model ‘X’, manufacturer ‘B’ might later decide to workaround the issue with another path and break the ‘A’ approach.

Translate
buzz
Grand Maestro
Nov 20, 2022 8:08 AM UTC

If your TV offers a “Fixed” audio output level, try this. If both SONY and SONOS respond to a Volume command, there may be “double dipping”.

Translate
Lyricist I
Nov 20, 2022 8:16 AM UTC

When I first bought my Beam I had a Samsung TV and didn’t know if the problem was with it or the Beam. I have since replaced it with a Sony and have the same issue so it is the Beam at fault (as has been admitted above).

It’s only a small problem but clearly there are enough of us fussy buggers who would like it fixed; the phrase “Spoiling the ship for a ha’p’orth of tar” springs to mind, it’s such a good device otherwise.

Translate
buzz
Grand Maestro
Nov 20, 2022 9:12 AM UTC

At one point I was using an older SAMSUNG TV that was docile. It did not have this issue and the Volume numbers that displayed were appropriate.

I have lots of “issues” with tech companies. For example: at the moment all of my browsers are struggling with this site. This Reply box might require a minute or more to populate to the point that I can start typing my reply. This started a week ago. Most other sites are not having issues. It’s not a sudden resource issue with this machine. I have lots of RAM, processor power, and bandwidth. Who should I blame? Windows? My machine? The browsers? SONOS? My ISP (I changed ISP’s a week ago)?

Translate