Skip to main content
Contributor I
Nov 20, 2020 10:41 PM UTC
Answered

Sonos and Sony XBR55A8H volume control problem

Problem: My Sony TV and Sonos system work very well with the Sonos system (Beam, Sub Gen 3, pair Sonos Ones) connected through HDMI Arc. Unfortunately,  the TV/Sonos volume always jumps 2 levels at a time when using the remote. eg 2, 4, 6, 8…

When I unplug the Sonos System and switch to the Sony to TV sound only, the TV volume adjusts properly, eg: 1, 2, 3, 4...

I am using the same remote and have tried several different remotes but get the same incorrect result.

I have also tried adding each piece of my Sonos system, checking volume control as I add each piece, but the result does not change, 2, 4, 6, 8...

Question: Is there a way to stop the volume jumping 2 steps at a time so I have a finer control of the system volume? I love the Sonos system but would like to improve the volume adjustment with the TV remote.

Thanks for any help.

 

 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Corry P
Corry PAnswer
Sonos Staff
Feb 26, 2021 11:39 AM UTC

Hi @Al_6a & @Jd1304 

Is this still an issue for you? It is expected behaviour, ie. normal, but you can obtain finer volume control by limiting your maximum volume for that room in the Sonos app. See our page on Setting a volume limit on Sonos players for details. This would not change the numbers you see on the screen, but each step of 2 would be a finer step in actual volume from your Beam. Setting this to 50% would result in a volume step of 1 for each 2 indicated on the TV. It does of course also limit the maximum volume available from your Beam.

I hope this helps.

"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein

24 replies

Annazel S
Retired Sonos Staff
Nov 21, 2020 8:53 PM UTC

Hi @Al_6a.

Thanks for reaching out and welcome to the community!

I appreciate your detailed post outlining your concern, let me help and try to figure this out.

To better understand and to help us identify the problem, kindly provide us the maker and model number of the remote and TV?

Can you tell us a little more about your Home Theatre system?  Is your TV connected to the Beam directly via HDMI or optical cable?

Have you tried checking for pending updates on the TV and remote? 

 

I'd like to check some data from your system. Please send in a diagnostic report through the Sonos app when it happens and reply with the confirmation number. I'd start by reviewing your system and see if there’s anything causing this issue.

 

Let us know how it goes and if you have any questions feel free to reach out, we’re always here to help.

Translate
Help others find useful content by clicking the like button and selecting the best answer to your question
Al_6aAuthor
Contributor I
Nov 21, 2020 10:03 PM UTC

Hi Annazel. Thank you for your response. Answers to your questions...

The TV is a 2020 Sony XBR55A8H OLED TV.

The TV is connected to the Beam directly via HDMI-ARC connection on the back of the TV

The Sonos system is running all the latest updates as is the Sony TV. Just checked again.

*Not sure as how to get a Sonos report as the problem is with the Sony TV connected to the Sonos Beam via the Sony TV HDMI-ARC going to the Beam (Beam is linked through the Sonos app to the Sub and pair of Ones)

The TV video/sound source is Telus Optic TV (Arris VIP5662W)

The remotes I have tried are:

  1. Original remote that came with the Sony TV, Voice Control Remote Model: RMF-TX500U
  2. One For All Universal Remote model: UEI URC-3110B00
  3. Telus Optic TV Slimline 2 Remote
Translate
Al_6aAuthor
Contributor I
Nov 21, 2020 10:16 PM UTC

Annazel:

Diagnostic Report sent.

Confirmation number: 2102251845.

Translate
Al_6aAuthor
Contributor I
Nov 21, 2020 10:19 PM UTC

 

 

I resent a second Diagnostic report. I ran the volume up and down a few times using the Telus remote.

Confirmation number: 386892970.

Translate
Al_6aAuthor
Contributor I
Nov 21, 2020 10:30 PM UTC

Annazel:

I am sending a third Diagnostic report. I ran the volume up and down a few times using the Sony remote. The volume bar on the Sonos app on my iMac moves up and down with the volume controlled on the Remote. TV sound goes up and down using the Sonos App volume slider.

Volume numbers on the Sony TV range from odd to even numbers with nothing consistent. Give it a few seconds and the volume control again goes from 2, 4, 6, 8 …. two by two.

Confirmation number is: 347808398.

Translate
Annazel S
Retired Sonos Staff
Nov 26, 2020 3:54 PM UTC

Hi @Al_6a.

Thanks for your responses and effort in submitting the diagnostics, sorry for the delayed response time.

Upon checking on the diagnostic report, there’s no issue detected on your Sonos system, all is green and I don’t see any errors that may have caused the issue.

At this point, you can give us a call and work with a technician live, they'll start with checking your system health and go from there. They have resources available for advanced troubleshooting, and the tools our agents can use would be very useful in this case, there can be an advantage if they need to remote into the controller to see what's going on.

 

If you have any questions or concerns, please feel free to let us know, we’d be glad to help.

Translate
Help others find useful content by clicking the like button and selecting the best answer to your question
Lyricist II
Dec 27, 2020 6:27 PM UTC

Was this ever solved?  I have the exact same problem with a Sonos Beam and Sony XBR-55X850B connected via HDMI ARC

Translate
Annazel S
Retired Sonos Staff
Jan 19, 2021 9:57 PM UTC

Hi @Jd1304.

Thanks for reaching out, we’d be glad to help.

You can give us a call and work with a technician live, they'll start with checking your system health and go from there. They have resources available for advanced troubleshooting, and the tools our agents can use would be very useful in this case, there can be an advantage if they need to remote into the controller to see what's going on.

 

If you have any other questions or concerns, feel free to reach out.

Translate
Help others find useful content by clicking the like button and selecting the best answer to your question
Corry P
Corry PAnswer
Sonos Staff
Feb 26, 2021 11:39 AM UTC

Hi @Al_6a & @Jd1304 

Is this still an issue for you? It is expected behaviour, ie. normal, but you can obtain finer volume control by limiting your maximum volume for that room in the Sonos app. See our page on Setting a volume limit on Sonos players for details. This would not change the numbers you see on the screen, but each step of 2 would be a finer step in actual volume from your Beam. Setting this to 50% would result in a volume step of 1 for each 2 indicated on the TV. It does of course also limit the maximum volume available from your Beam.

I hope this helps.

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
Al_6aAuthor
Contributor I
Feb 26, 2021 3:14 PM UTC

Thank you for the added information. I will give this a try.

I do enjoy the surround sound of the Sonos system which, expectedly, requires “more” volume to fill the room.

I really do not understand how this can be “expected” behavior. How is a flaw in the system ok?

Translate