Skip to main content
Contributor II
Jul 14, 2023 6:54 PM UTC

Blu-ray player downscaling?

Hey everyone,

I just upgraded my blu-ray player to the Panasonic UB-420 with the twin HDMI ports.  I had the 150 and was able to get Dolby Atmos, but for some reason I can’t get it now and it seems the sound is being downscaled.  I have an LG UN9000 tv, and no settings on that have changed, and the Beam (gen 2) is connected to the eArc with the pass-through setting on the tv.  Does anyone know the settings i need from the blu-ray player and which port the audio HDMI cable should be in to get Dolby Atmos/Digital and multichannel PCM sound like I had with the previous player?  Any assistance appreciated. 

Thanks, 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

16 replies

Contributor II
Jul 14, 2023 8:44 PM UTC

I should clarify: that audio cutting out and being spotty only happens w/Atmos, not DTS. 

Translate
Lead Maestro
Jul 14, 2023 8:51 PM UTC

Is the HDMI Input Audio Format setting on the TV set to Bitstream on all of the used HDMI ports?

Try using a different HDMI cable with the single cable connection.

Translate
"Receive with simplicity everything that happens to you." - Rashi
Contributor II
Jul 18, 2023 5:06 PM UTC

Ok, I tried a new, higher speed HDMI cable and i’m still getting this same issue with Dolby audio.  I used it as the single connection for audio and video and the issue still isn’t fixed.  i also tried putting this new cable into the Beam and connecting it to the eArc port on the tv and it did the same thing.  i’m really at a loss here, is this just a setting i’m missing, or am i just going to have to suffer with this sound issue until i can add another component (receiver?) to my home theater setup?  it’s so frustrating. 

Translate
Contributor II
Jul 18, 2023 5:07 PM UTC

And all of the HDMI inputs on the TV are set to Bitstream, and the dolby audio setting on the blu-ray player is set to Bitstream as well. 

Translate
Lead Maestro
Jul 18, 2023 5:13 PM UTC

Can you please post photos of the HDMI cables connected to the back of the Blu-ray player and TV and post a screenshot of the current Digital Audio Output settings on the UB420?

Translate
"Receive with simplicity everything that happens to you." - Rashi
Contributor II
Jul 18, 2023 5:15 PM UTC

Yep, i’ll post those. 

Translate