Skip to main content
Avid Contributor I
Nov 2, 2020 9:00 AM UTC
Question

Beam placement - TV legs interfere?

Ok so I have this tv:

https://images.app.goo.gl/QjFcokykdKVXwEKSA

The legs are 88cm apart and the beam is sitting in middle with a tv leg 10cm away each side.

As you can see the legs aren't massive but the sound still hits some of them.

I am considering mounting tv to wall then beam will sit alone on stand and have full freedom.

Should I get better sound quality doing this?

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

4 replies

yuvalfrrAuthor
Avid Contributor I
Nov 2, 2020 1:07 PM UTC

Any thoughts?

Translate
yuvalfrrAuthor
Avid Contributor I
Nov 2, 2020 2:53 PM UTC

 

Ok so I have this tv:

 

https://images.app.goo.gl/QjFcokykdKVXwEKSA

 

The legs are 88cm apart and the beam is sitting in middle with a tv leg 10cm away each side.

 

As you can see the legs aren't massive but the sound still hits some of them.

 

I am considering mounting tv to wall then beam will sit alone on stand and have full freedom.

 

Should I get better sound quality doing this?

Translate
melvimbe
Nov 2, 2020 3:39 PM UTC

As long as the Beam isn’t sitting behind the TV, the sound quality should be fine.  I would make sure the Beam doesn’t block the TV screen , in which case you may want to mount the TV or raise it up with block s or something like that.

Translate
Danny
Stanley_4
Grand Maestro
Nov 3, 2020 1:03 AM UTC

Before you go to a lot of work just try moving the Beam forward a few inches or the TV back.

If you hear a big difference in the sound then look at a permanent solution. I don’t think you will hear anything but to be sure get an assistant and try a single blind test where you don’t look to see where they are sitting and try to tell from just the sound.

Translate