Skip to main content
Contributor I
Aug 14, 2022 1:21 PM UTC
Answered

After update to version 14.12, subwoofer sound problem, sound volume is low

After updating to version 14.12, I re-tuned the trueplay tuning, the result is that the subwoofer sound is small, position, sub audio is 0, but the volume is low. I'm using a Gen 3 sub woofer.

Hopefully sonos will fix this bug soon thank you

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Corry P
Corry PAnswer
Sonos Staff
Aug 15, 2022 8:20 AM UTC

Hi @bigboyz989 

Welcome to the Sonos Community!

We are aware of this issue, and are working on a solution.

More info can be found on the following thread:

 

"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein

41 replies

Avid Contributor I
Sep 14, 2022 2:35 AM UTC

I was able to make my sub to work by connecting it to my playbar via network cable and disabling the wifi. I also have my playbar connected to my network via cable.

 

Interesting.  Has anyone else tried this while having the ARC & Sub?  So the sub is back alive after using true play tuning?  My understanding is that at least in the case of the Beam you can just increase the sub volume to compensate (even while using True Play) while this may not work for ARC users.  Perhaps the Playbar is not as affected as the ARC.  

I haven’t purchased my system yet (waiting to see if this is fixed) - so I can’t experiment - I intended to wire the connection to the ARC anyway given that my ethernet connection is there anyway.  

Translate
Generalzod
Trending Lyricist II
Sep 27, 2022 4:43 AM UTC

Any news yet in regards to this issue?

Translate
Avid Contributor I
Sep 27, 2022 9:28 AM UTC

Any news yet in regards to this issue?

Judging by their consistent track record of releasing a software update on the 3rd Tuesday of each month, it won’t be until October the 18th at the earliest.

Translate
Corry P
Sonos Staff
Oct 19, 2022 7:34 AM UTC

Hi all,

Thank you for your continued discussion. We’re really happy to be able to tell you that today we’ll release an update that will include fixes to the issues that resulted from the 14.12 software update with Enhanced Clarity for Arc.In the 14.12 release, we made a change to Arc’s sound profile to improve dialogue clarity and the overall sound experience.  Since that update, some users whose configuration included a Sub have experienced two issues:

  1. Users of Arc would find the same volume settings resulted in lower output volume. Whilst the maximum volume and bass capabilities were unchanged, volume settings in the lower regions resulted in a quieter sound than before the update
  2. Users of Arc, Beam and Ray would find their Sub output is lower than desired after performing a new Trueplay tuning.

(Home theatre configurations without a Sub were unaffected, including standalone soundbars and those bonded with surrounds only)

With the 14.18 software update, both of these issues have been addressed, and the Enhanced Clarity for Arc adjustments are retained. There was a clear preference within our community for the previous volume settings, and these have been restored. This will be apparent immediately after updating to 14.18. The Trueplay issue has been fixed. Customers who experienced a lower Sub level after performing Trueplay after updating to 14.12 will need to update their systems and then perform a new Trueplay tuning in order to address these improvements in their system. Customers will hear a more powerful low end response, meaning any Sub level adjustments made after 14.12 should no longer be required.

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
Trending Lyricist I
Oct 31, 2022 11:15 AM UTC

Hello, I am still having the low volume issue with the 14.18 update. I went through Trueplay setup again as well. I can especially tell the volume difference walking into the room from another room at the same level. Please advise as to how to fix?

 

thank you,

 

Translate
Corry P
Sonos Staff
Oct 31, 2022 11:48 AM UTC

Hi @bej432 

Have you tried rebooting the device in question? To do so, just unplug it from power for a short time.

I hope this helps.

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
Trending Lyricist I
Nov 3, 2022 11:05 PM UTC

Hello @Corry P,

As you suggested I rebooted and while it did improve, my room with arc is still lower. It’s better than before but still noticeable. When I have all rooms set to volume 8, I need to adjust the room with the arc home theater setup up to 11 to not notice any volume difference when transitioning from room to room. I did also try re-tune the Arc with TruePlay but no luck. Please advise? Thank you

Translate
Trending Lyricist I
Dec 15, 2022 7:48 PM UTC

Hello @Corry P,

 

I am following up again. I am still having the volume issue as described above where the room with Arc HT setup is still slightly lower volume at the same number as the rest of my adjacent rooms. Is there any update on this issue?

 

thank you,

Translate
Corry P
Sonos Staff
Dec 16, 2022 9:08 AM UTC

Hi @bej432 

I’m not sure what you mean. There’s no reason to expect multiple speakers in multiple rooms to all sound like the same level of volume just because the number on the volume control is the same - the perceived volume depends on the speaker design, amplifier power and the size of the room, not to mention how much furniture or people there are in the room with it, what’s hanging on the walls and what the walls are made of.

 

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
Trending Lyricist I
Dec 28, 2022 1:42 PM UTC

Hi @Corry P,

 

I am trying to say that my volume level in the arc HT room still hasn’t been fully corrected since the one update cause an issue with the Arc. The sound in that room still sounds muffled and at a lower volume than other rooms.

Translate