Skip to main content
Contributor II
Nov 6, 2026 11:42 PM UTC
Answered

Ace Ultra: Access the settings while TV audio swap

I contacted the support and got two different answers.

For using TV audio swap with a Arc, I have to switch off or disconnected the Ace from Bluetooth on my phone. If not, the Ace will not switch to the Wifi.

 That is inconvenient but i get it.

But now I can’t see the Ace in the Sonos App, it says “ headphones not found “.

 If that normal or an error? Should i see the ace ultra in the app while connected to the arc? How can I change settings now? Or see the battery life?

 From the Sonos support, i got two different answers. One said yes, the other said it’s normal.

 Thanks

kdowling
kdowlingAnswer
Nov 7, 2026 1:27 AM UTC

You do not turn off or disconnect the Ace Ultra from Bluetooth on your phone. While using Bluetooth, you can use the Sonos app to TV Audio Swap. Or use the Content Key. While swapped, the Ace Ultra are using the soundbar’s wifi. But they are still shown and available in the sonos app. Use the app, or content key, to swap back. The Ace Ultra will reconnect to the phone’s bluetooth. All done automatically.

Listen to your TV with Sonos headphones TV Audio Swap

7 replies

kdowling
kdowlingAnswer
Nov 7, 2026 1:27 AM UTC

You do not turn off or disconnect the Ace Ultra from Bluetooth on your phone. While using Bluetooth, you can use the Sonos app to TV Audio Swap. Or use the Content Key. While swapped, the Ace Ultra are using the soundbar’s wifi. But they are still shown and available in the sonos app. Use the app, or content key, to swap back. The Ace Ultra will reconnect to the phone’s bluetooth. All done automatically.

Listen to your TV with Sonos headphones TV Audio Swap

Translate
EricCHAuthor
Contributor II
Nov 7, 2026 4:03 AM UTC

Thanks for answering.

When connected to Bluetooth, the tv audio swap doesn’t work, pressing the content button on the ace has no effect

 Sonos support told me, the ace has to be in Wifi mode (white LED) to support TV audio swap

Translate
kdowling
Nov 7, 2026 2:41 PM UTC

The information you received is wrong or misleading. The Ace Ultra changes from bluetooth to using the wifi from your Arc automatically when you initiate TV Audio Swap. Can you see the Ace Ultra in the Sonos app when connected to your phone with Bluetooth? Have you done the setup for TV Audio Swap in the app? Can you see the TV Swap button in the app? Are you able to TV Audio Swap using that Swap button shown in the app? 

Please see the support article I linked to above which explains how to do it. Make sure you haven’t turned off the Arc’s wifi, it needs to be on.

Edit: If you have added the Ace Ultra to your TV Audio Swap setup for the Arc, try removing them from the swap setup and adding them back again. See if that helps.

Translate
EricCHAuthor
Contributor II
Nov 19, 2026 1:58 AM UTC

I’m aware how it should work.

When I did the first time setup, it worked like you described. Then it stopped working.

So the support had me do a hard reset for the Ace. And the funny thing was, it worked again, the switch via the button.

Now it stopped working again, I see the Ace in the App. I can also switch manually the output from the Arc to the Ace, but the switch via button doesn’t work anymore.

I removed the Swap and added it again, but button still doesn’t work.

I assume because it’s still in Beta? Still buggy?

Translate
kdowling
Nov 19, 2026 2:22 AM UTC

I have found that headphone linking via the Content Key (speaker swap) is hit or miss. It always works using the app though. I haven’t had any problems using the Content Key for TV Audio Swap using a Beam Ultra.

Translate
EricCHAuthor
Contributor II
Nov 19, 2026 10:06 PM UTC

It is just strange, that it works for a while flawlessly, then suddenly stops working. I have a Arc Ultra. I hope Sonos listen to the feedback and will fix that.

Translate
Airgetlam
Nov 19, 2026 11:28 PM UTC

Hopefully, you’ll submit a system diagnostic within 10 minutes of reproducing the issue, and call Sonos Support to discuss it. Do not factory reset any units. Also, don’t post the resulting diagnostic number here.

There may be information included in the diagnostic that will help Sonos pinpoint the issue and help you find a solution.

When you speak directly to the Support staff, they have tools at their disposal that will allow them to give you advice specific to your network and Sonos system.

If they’re unaware of the issue, and can’t pass on a reproducible case(s) to the person looking in to it, the chances of a fix are much lower. 

Translate
Bruce