Skip to main content
PhilSkill
Enthusiast II
February 13, 2018

Android Controllers and Setup, past the CR100 brick

  • February 13, 2018
  • 112 replies
  • 8635 views
As many of us are being thrown off of our CR100's, and forced onto an external third party device, please use this thread to say what device you will use or have tried, and advise what settings and configurations make it work.

Please keep it on topic, use the "Save the CR100" thread to put the world to rights on the bricking of our functioning devices.

Life must go on, The CR100 will die, lets try to help each other find our best solution.

To start,

I have just purchased a Lenovo Tab 7 Essential, 7" screen so similar overall size to the controller, ordered through Tesco Direct, very fast service available in 3 hours from ordering.

Tesco added a discount so got it for £62, although They advertised it as the Tab 4 7" which is actually a different unit with slightly higher res and should retail at £99 rather than £69 anyway its fine at the right price. both run Android 7.0

So set it up with no security as I don't want a pin entry each time I pick it up.

Installed Sonos from Google play and allowed Sonos net connections and connected straight to my system.

Then set the sonos options to "Show lock screen controls" and "Show Volume on Home screen"

Set the Android screen saver to Clock (its a bit too small compared to the Controller) but can be shown when docked (charging), so leave the unit on and it blacks out to a clock, can be digital or analogue.

One downside of this particular device is the micro usb charging port is not central, so Belkin docks wont work, so the cradle/dock could be an issue!? Any ideas?

Leave the Sonos app running and it comes out of the lock screen into Sonos.

Without a proper cradle its not so easy to directly compare, sometime touching the display unlocks, othertimes I need to press the side power button.

If you touch the button it goes to the home screen, which needs a swipe to unlock, a nice touch, if sonos is playing and running, then the home screen wallpaper is the artwork.

On the home screen are quick access play,stop and skip but no volume, there is a tiny expander arrow that opens up a menu that has a button to change volume, but thats way too complex, easier to double tap the quick access area and it opens the sonos app to show you the zone with volume control, art, queue etc.
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

112 replies

Paul Gordon
Enthusiast II
February 20, 2018
I assumed you'd re-textured the CR to blend in with the tiles.

I'm in the habit of removing it from its cradle & taking it into the bath... so it gets covered in soapy fingermarks...
SAVE THE CR100!!
Paul Gordon
Enthusiast II
February 20, 2018
I assumed you'd re-textured the CR to blend in with the tiles.

I'm in the habit of removing it from its cradle & taking it into the bath... so it gets covered in soapy fingermarks...


However, I have started experimenting with a replacement option...

a) I HATE visible wires... however with a retrofit, there's no way I'm about to start hacking into the wetroom walls
b) The frame was a spare cheapo plastic photo frame that I had lying around, and isn't quite big enough

this is my first endeavour at using one of my old spare iPads as a sonos controller in one of the bathrooms. The frame isn't purpose made, I took my Dremel to an old spare photo frame. it's only just big enough, and that lead to a couple of problems;
The old style Apple 30-pin connector is too close to the frame edge to be able to bend the cable 90-degrees & keep it inside, so I had no choice other than to make a hole in the frame & lead the power cable straight out. I've subsequently ordered a couple of 90 degree offset Apple charge cables, however the bulk of the body of the plug is just as big (if not bigger), so it's no better fit unfortunately. Also I had to make a cutout for the home button.

When the weather gets a bit nicer & I can get back out into the workshop (It's currently snowed in!), I think I'll try & construct a frame from scratch with better dimensions, & perhaps fit a USB socket flush to the frame edge so I can have no visible wires leading out of it. I wanted to be able to charge it without removing it from the wall if possible (it's held on with velcro). Currently when it needs charge I take a powerbank to it & charge it from that.

In this scenario I don't mind the lack of screen rake - flat against the wall is fine, since I use it when lying down in the bath, so it's right at eye level.

The software is "SonoPad" rather than the official Sonos app, and it's set in guided access mode. Unfortunately with this particular frame design I have no access to the physical volume buttons (also something to change for version 2), so I have to use the touchscreen.
SAVE THE CR100!!
Paul Gordon
Enthusiast II
February 20, 2018
So I figure converting just about any phone/tablet to wireless charging should be pretty cheap & easy, using an aftermarket receiver like this one: https://www.amazon.co.uk/Charger-Receiver-Wireless-Charging-Cellphone/dp/B01EHQ1ZWY/ref=sr_1_1?ie=UTF8&qid=1519136023&sr=8-1&keywords=qi+receiver or any number of others like it... Then we need a nice wall-mountable dock with a QI charging pad built in...
SAVE THE CR100!!
Avid Contributor I
February 24, 2018
I realise this is not an Android solution but the Logi Base https://www.logitech.com/en-gb/product/base-ipad-pro-stand provides a reliable charging station that is better than the CR100 cradle as it grips by magnets. Unfortunately, you need an ipad pro to take advantage of it and the ipad pro is not as good as the CR100 if you want to lay it down at the bath side. Better than wireless charging though. Long live the CR100.
chicks
February 25, 2018
I rarely use the Sonos app to play music anymore, though it's installed on three tablets and two phones. Alexa has gotten so good at recognition that she rarely misses an artist/album combo that I ask her to play, or one of the five or six stations i listen to. No MMI is more natural than voice.

I did get the iPort, but frankly it's just easier and faster to use voice. I greatly preferred the Sonos app to the CR100, so rarely used it (just dragged it out of storage recently). Won't miss the CR100, and probably won't often use the iPort. Alexa is my preference, and will only get better and even more convenient.

Enthusiast I
February 28, 2018
I rarely use the Sonos app to play music anymore, though it's installed on three tablets and two phones. Alexa has gotten so good at recognition that she rarely misses an artist/album combo that I ask her to play, or one of the five or six stations i listen to. No MMI is more natural than voice.

I did get the iPort, but frankly it's just easier and faster to use voice. I greatly preferred the Sonos app to the CR100, so rarely used it (just dragged it out of storage recently). Won't miss the CR100, and probably won't often use the iPort. Alexa is my preference, and will only get better and even more convenient.


Alexa can't be used for your own selections from your NAS.
Why are you posting this here, it's not relevant? This is how to set up alternatives that are something like the CR100 for people who want something NOW.
Enthusiast II
March 2, 2018
May be old news but I just read about the Lightphone 2 tonight which looks quite "Sonosy".
18 zones, 29 devices and counting
chicks
March 2, 2018

Alexa can't be used for your own selections from your NAS.
Why are you posting this here, it's not relevant? This is how to set up alternatives that are something like the CR100 for people who want something NOW.


So i guess you missed the part about the iPort, then... :8
passopp
March 2, 2018
Although not directly affected by the upcoming changes (as I do not own a CR100 myself) I've been following the related threads closely.
It seems to me that what is lacking in terms of alternative Sonos hardware controlers is a waterproof (or at least IP6x certified) device with hardware buttons, a scrollwheel and (preferably) a touchscreen input for when not standing in the shower.:8
Apart from the scrollwheel a dedicated waterproof Raspberry Pi or customized Android device might do the trick here. Maybe dismantling an old, defect CR100 and swap its' inserts for a small PocketPC might even be an option, but this sounds more like a nerdy weekend project to be honest.
Contributor I
March 7, 2018
I wanted to share my use case for the CR100 and how I am replacing it. I am a foster parent of teenagers. Some stay a while and some do not. I need to strongly control the internet and "device" usage in the home as some kids are *very* inappropriate. The CR100 was perfect because I could disable my wifi and still have a CR100 in each of the kids rooms. Now having to get some kind of "device" to replace the CR100 opens up an opportunity for that "*very* inappropriate" stuff.

Here is what I have come up with:
I purchased an inexpensive android phone, docking cradle and protective case for the bedside. I purchased the Motorola Moto E (4th generation) from an ebay vendor for $70 each.

On top of the stock android distribution I have installed an app called "Fully Kiosk Browser & App Lock down"

I disable almost all of the other android and google apps that came pre-installed

I installed the Sonos app.

I allowed the app to connect via SonosNet

Once I was connected to the SonosNet I had the device "forget" my primary network (so it now only connects via SonosNet)

Using the "Fully" I enable "Kiosk mode" so the only app that is available is Sonos and that app auto launches on boot. I also disabled (in "Fully") access to the Notification bar and settings.

Other than a few tweaks within "Fully" and the android OS this solution provides for all of my use cases.

I also applied the above to my old Google Nexus 4 and Google Nexus 5 phones and now have a Sonos Controller in locations that I did not have before.

I tried the Pinning method that Sonos suggests but unless you set the password protection on Android the kids can disable that quickly and easily. With password protection enabled I need to unlock the device all the time. This did not work for me.

I tried several other "app locking" applications but the kids were still able to get to the Settings menu and screw things up. If I ever left the Play Store available I would be totally screwed as they install VPN software to bypass the DNS filters I have in place.

I looked at several "Kiosk" packages and that was the way to go - but the cost of most of them were $50 per year per device. The "Fully" app was ~$7.50 per device, one time fee. Using "Fully" you can still disable the Kiosk mode and return the device to full usability - you just need to know the special gesture and the password. Should someone try and fail the device returns to its locked down Kiosk mode.

I hope that this helps some of you who have seniors in your life that can screw up any device they touch as well as kids you need to manage.

If anyone has a question please feel free to reach out.
Dan