Skip to main content
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Best answer by AjTrek1

​@buzz solution will work...I think 🤔. However, less hassle for balance (although you’ll have to purchase another Sonos product) you could use a Sonos Port with a RCA to ¼ inch (like this) connected to the Ports RCA out-put. 

13 replies

AjTrek1
AjTrek1
June 21, 2025

Is there a way to hook up these to the amp??

First of all we have no idea of what you are asking. Your title could be any Yamaha speaker (wired or powered). The Guide to connecting 3rd party wired speakers to the Amp is in the link

https://support.sonos.com/en-us/article/set-up-your-sonos-amp

 

Together Everyone Achieves More = T.E.A.M.
    spat_kellyAuthor
    Contributor I
    June 21, 2025

    They are powered studio monitors that have ¼ inch plug in back for the audio output. Not a traditional speaker wire set up. Like this

     

    buzz
    buzz
    June 21, 2025

    You would need a speaker to line level adapter.

    AjTrek1
    AjTrek1Answer
    June 21, 2025

    ​@buzz solution will work...I think 🤔. However, less hassle for balance (although you’ll have to purchase another Sonos product) you could use a Sonos Port with a RCA to ¼ inch (like this) connected to the Ports RCA out-put. 

    Together Everyone Achieves More = T.E.A.M.
      106rallye
      106rallye
      June 22, 2025

      With powered speakers I’d say  a Port would be better suited than an Amp.

        buzz
        buzz
        June 22, 2025

        With powered speakers I’d say  a Port would be better suited than an Amp.

        Yes, I agree. My assumption was that the AMP is already on hand.

          spat_kellyAuthor
          Contributor I
          June 22, 2025

          Thx yall ill get a port and get more speakers for the amp i have. 

            spat_kellyAuthor
            Contributor I
            June 27, 2025

            Ok so i got the port and i can only get one speaker to play?? I switched the wires and the other one played. Does it only have one channel so it’ll only play one speaker i.e. only the left  

            spat_kellyAuthor
            Contributor I
            June 27, 2025

            And yes i have the amp too

            buzz
            buzz
            June 27, 2025

            I don’t know how you switched the wires. Don’t switch too much at the same time or you can’t be sure exactly where the issue is. For example if you exchange connections at the speakers and the problem moves, you have learned that the issue is not with the speakers. Wires, PORT, and input to the PORT are still suspect. Systemically work through the connections and “boxes”. Also consider operator error. Never assume that the problem must be [ … ] or cannot be [ … ] or you’re likely to be blindsided.

            Show more replies
            Terms & ConditionsAccessibility statement