low turntable volume sonos 5 and One

7 replies
149 views
Translate All

I’ve added a ProJect turntable and preamp to my Sonos setup (two Play:5s and two Play:1s). I get good sound quality by the volume is low. Here’s how I’ve set it up: I’ve routed the turntable through a pre-amp that’s connected to a Sonos Connect which connects wirelessly to my various speakers. I’ve tried several amps, but the volume is always low, like a 3 or 4. I’ve adjusted the volume levels on the turntable and the speakers to full volume, but still no luck. Any suggestions?

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

jgatieAnswer

Adjust the Line-In source level under Settings > (Connect Name) > Line-In > Sources > Source level. Also, double check that the Pre-Amp is operating correctly. You do say that the audio is good quality, but one of the symptoms of no pre-amp is a low level signal that can fool one into thinking it is a volume problem.

jgatieAnswer

Adjust the Line-In source level under Settings > (Connect Name) > Line-In > Sources > Source level. Also, double check that the Pre-Amp is operating correctly. You do say that the audio is good quality, but one of the symptoms of no pre-amp is a low level signal that can fool one into thinking it is a volume problem.

Translate

Stanley_4

Grand Maestro

There is a volume control on your turntable? Is that volume control possibly on the preamp?

Why are you trying different amplifiers to connect to Sonos speakers? Did you mean preamps?

Trying a generic answer.

The turntable likely has a MM moving magnet cartridge, confirm that and make sure your preamp is set to the proper MM/MC setting. Make sure you don't have two preamp in the loop, internal turntable and external for example.

Set the preamp volume control to mid range.

Set the Sonos line-in level to midrange.

Set the Connect and any Grouped speakers to midrange.

If it is still too quiet adjust each setting up a bit and try again.

Once happy with the level you can tweak the various levels for the best sound.

Translate

S

Sfphil6262Author

Contributor I

Thank you to everyone who responded. I reconnected everything to make sure the set up was correct (it was). I worked with the settings in Sonos, adjusting the source levels, but the problem persists. I have all of the volume levels set to high, but I still get a low level of volume. There are no volume controls on the turntable or the amp and I know the amp is working because if I remove the power cord, all sound stops. Maybe it’s a problem with the bridge? I’ve tried the volume control on the bridge, but it has no effect on the sound coming out of the speakers.

Translate