Components & Architectural

My Sonos multi-room music distribution system is somewhat dated, but working perfectly well. I have just bought a new Windows 11 PC and I want to run Sonos from the music library on this new device. I have shared the library on the network, but the Sonos controller [on my iPhone] will not acknowledge it and will not update the software - It says a couple of my Sonos components are “incompatible...” I don’t want anything new; I just want to continue using my Sonos system as I always have - Can anyone help me?Thanks, Geof Ashton

Hello everyone,I received a new Arc Ultra yesterday, and after setting it up, I hear a crackling sound in the high frequencies, particularly with piano music but also with some voices in movies. It's not just necessarily harsh (which might be down to my interpretation) but there's also a kind of crackle mixed in, instead of the tones being pure.Is this a known issue? I can't find anything about it on this forum and I'd like to do some troubleshooting before I call Sonos directly.Cheers!

Hi, I bought the pro ject carbon vinyl player thinking it would connect straight up to my beam. I have 2 One SL as surrounds and a sub mini. I bought the beam circa 2021. Do I need to buy something to connect the record player to the Sonos system? thsnks in advance  

How do I connect a Sonos 3 speaker to a Brennan B2?

My TV sound (through a DAC converter) shows in my Sonos system as a source (Line-in), and when pressed it does show a signal (signal symbol fluctuates), but no sound comes. This has worked in the past but has stopped working some time ago. I have tried a lot (swap optical cable, power resets, adjust settings in app) but nothing works. When removed the Line-In source disappears so it is evident that it is correctly connected. Any tips??

I have a Play 5 that is connected to AT-LP60X turntable. For several years this has worked flawlessly. We noticed earlier this year that the records had a warble sound. Almost sounded like the music was under water. It was in the spring time and we got busy with summer activities. Now that it is cold and we want to listen to our music we are noticing it again. We changed out the needle and tested the speed of the turntable. All was good. Finally we hooked up some headphones to the turntable and the sound was flawless.  I tried some online recommendations and it really seems like an issue with the audio compression setting being removed from the Sonos application. If I reset the speaker, or change the EQ settings. The sound goes back to normal and the distortion is gone, but it will come back usually around 10-15 minutes later.  Supposedly this was an issue with the app update that was fixed. It appears to still be an issue for me. It is VERY frustrating to have invested so much into a

I have a Port and a a pair of Play 3 as a stereo pair. Every time I stream music from iTunes I have to do the dance of remember in the Sonos App how to get the Port to play to the Play 3’s - can I configure the Port to always auto pair with the Stereo pai?

Hi folks,I have had a bit of a saga with my Sonos Connect working with my Sonos system. Quick Summary:Upon purchase, successfully added Sonos Connect Gen 2 to system that includes 2 Play:1s, one Play:5, and a Roam.  After some time, the Line In showed as Disconnected, and ultimately the Connect needed a system update that it could not execute. This was resolved with Sonos Support after successfully updating while connected via Ethernet.  Several weeks later, the Sonos Connect Line-In again showed disconnected and needed a system update that it could not execute via Wi-Fi. This time nothing worked (all the flavors of reboots on the phone with Sonos Support).  Out of curiosity, I took the Connect to another house and connected it to my in-laws’ Sonos system, on which it successfully updated and added to the system via Wi-Fi, When I took the Connect back to my home, hard reset, and tried to add to my system, it still shows as Not Registered (which it didn’t on my in-laws’ system). It no l

HiIn my living room, I would like to connect my Arc Ultra to my Sub.But this sub is already used by a pair of Five.I have read here and there that it is not possible to share 1 sub with two different configs.But how is it possible? As long as both configs are not playing different sources at the same time, why is it not possible?I guess I am not the only one facing with this issue.And, sorry, but I do not intend to install a second sub in the same room…Thanks for your replies/support/ideas

I want a stereo setup for my desktop PC, which has an optical port. Will a pair of Era 300 front speakers work for this?

I recently purchased and Arc Ultra and have connected my PC to my TV and back to the Arc. My PC is only giving me the option to output in stereo.  When in was using my old RXV6A I would get 5.1 in the sound options from my PC. I have reset all settings and power cycled everything. When I use the Netflix app on the TV I am getting 5.1.  My PC is connected to the HDMI 1 on my TV which is a LG 49ub850

I have a the Sonos Amp and I’m trying to connect it to my surround setup, which consists of the beam, 2 era 100’s and sub mini. I have a U-turn orbit turntable it has a built in preamp and I’m using av cables. I’ve tried to setting up the amp as a part a surround system with just my beam and sub and nothing plays. I even tried grouping it by having the amp by itself and having my beam, eras, and sub as one system and still nothing. It doesn’t give me the option to add the amp to the system. Any suggestions?

Hi everyone,I’m looking to use Sonos products as my main PC speakers and wanted some guidance from people who’ve tried it. I know Sonos is designed mainly for Wi-Fi streaming, but I’m curious about the best setup for desktop use.I’d like to know:– Which Sonos device works best for PC audio?– How noticeable is the latency for videos or gaming?– Is there any reliable workaround to reduce delay?– Would a Sonos Amp or soundbar (Ray/Beam/Arc) be a better option?Any recommendations or real-world experience would really help. Thanks!

I have two white Flexon stands for Play 5s as shown in the photo. We have no room for them now as we have moved into a flat and our Sonos 5s are sitting cosily in a bookcase. I’ve tried eBay (no takers) and Freecycle (no takers), but am reluctant to take them to the tip. If anyone wants them and is willing to pick them up in Guildford, UK I will quite happily let them have them. They are in very good condition. 

Sometime ago, I asked for people to recommend a music player for my Sonos speakers. I was looking for something to rip my CD collection to that was easy to use and navigate. That thread got closed, but I thought I would provide an update.  My initial attempt was a Brennen Helix, but I just never got on with it. The 2nd suggestion was to build your own NAS with a Raspberry Pi. I was not keen, because I wanted something a little more presentable than a collection of devices. Also, I wanted my wife to have full access, so easy to use was a high priorityHowever, with no obvious commercial device out there (or at least one which I could guarantee SONOS  connectivity, I bowed to the inevitable and bought another Pi. However, in this case it was in the form of a Waveshare CM4 box, which I could fit tow 512 GB SSD’s.  These I have in a RSYNC so have a backup (RAID would be overkill, since it rarely changes), and use SMB to connect with. The device came pre-assembled with PiOS and OMV pre-insta

Hi can anyone tell me what gen sub this is? thanks in advance  Moderator Edit: Removed serial number from picture

Bonjour,Je n’ai plus de son qui sort sur ma chaine connectée à Sonos Conect gen 1. La chaine marche bien je l’ai vérifié.J’ai fait un reset usine du sonos connect cela n’a rien changé. Dans mon appli Sonos je vois bien mon connect, je peux supprimer le voyant blanc augmenter ou diminuer le son etc… les informations circulent bien entre l’appli Sonos et le Connect.Cela s’est produit après une absence de 4 semaines. J’avais exactement le même problème sur des Play 1 et ma Playbase, les débrancher 30” et les rebrancher à régler le problème sauf sur mon sonos connect.Merci de votre aide

Excuse my ignorance but I am wishing to play CDs thru a Era 300.I am obviously required to purchase a CD player but can anyone advise if there is a particular brand that is more compatible with Sonos than others.If not, is there anything obvious I should look out for in selecting a brand?i also have a Sonos record deck and am wanting to also play that thru the same Era 300, having previously played thru a Move speaker. Is that possible?Thank You in advance…..

I had an old Telia router (Fast) and suddenly my Move speakers did not appear in my app. I tried to reconnect and even after a reset they were not accessible nor visible. After I spoke to Sonos support in Norway 🇳🇴 they were aware of the problem with Telia routers, which delivers internet access/subscription in Norway. I followed their advice to contact Telia support who also was aware of the problem with some old access routers. Luckily I could change the router for free. But what a waste of time. Does anyone got a clue of might cause the incompatibility. Has Sonos upgraded security protocols or network lately I wober?

I have an open concept first floor with a Sonos beam on a wall mounted TV. I have the amp and 4 speakers not sure where to place them anyone have some suggestions. I don't really need surround sound for the TV looking for more audio for the room. Do i need all 4? what should I do? 

Is it safe to install Sonos 8 inch speaker in the drywall without any reinforcement? They weight 9lbs each and will be installed on double drywall ceiling without additional bracing/reinforcement on a retrofit project. 

Hi, trying to add a Connect Amp but it requires an update first.It keeps going in a loop (gives update button option, I click it then it loops back to click the update option again)but doesn't show an error code. Also tried downgrading to the previous Sonos S1 app. Fails to find the amp. Tried the usual reboot after factory reset of holding in the speaker/mute button until it goes into pair mode (green colour). Cleared out the android app cached data as well and tried the website app but it doesn't allow you to add a device....grrrAnyone know how to sort this?

I have a Sonos set up that was installed in 2013.  In the last 1-2 months, my system will cut out for 5-10 seconds.  This will move from room to row with no specific pattern.  Sometimes it will happen 3x in a row about 10 minutes apparent.  Other times it will only happens once or twice with an hour between.  When it cuts out in one room, you will still hear the Sonos playing in another room.I currently have 3x 1st Gen Connect that connect via a Bridge to the Wi-Fi.  These 3x Connects support three different rooms.  The speakers are not Sonos and are powered by a separate amplifier.  So each Connect attach to a different channel on the amp which power the speakers in the respective room.  We also have a 4th room that uses a Connect Amp that powers a set of floor speakers.  All Connect components are connected via a Sonos Bridge and controlled through the Sonos App (not the S1).I normally steam SiriusXM and Amazon Music.  Sometimes we will listen to a CD To trouble shoot, I have install

I have a gen 2 amp that one of the speaker outputs started emitting a crackling sound.. the other output sounds fine… I also have an old amp that doesn’t work. Was wondering if I can swap the outputs?

I would like lower volume on like ”1-2”. (I can only choose 1 in  app an not on speaker…)when having the speaker next to you and want some music for sleep it usually too loud.