Skip to main content
Trending Lyricist I
December 12, 2020

ASUS RT-AX86U & SONOS CONNECTION ISSUE SOLVED!

  • December 12, 2020
  • 96 replies
  • 38780 views

I’m posting this in hopes of saving someone else from the hours of frustration I’ve endured to resolve this issue.

From the time I set-up my Arc + Sub + Surrounds system in July with an Asus RT-AC88U router (connected to Fios Gigabit internet) it has worked without issue. I’ve used Asus Smart Connect with all settings at default. No problems with the S2 app and no problems when I upgraded to an iPhone 12, other than the loss of Trueplay support, which continues to be a problem. (HELLO Sonos! Anyone home?)

Then I recently upgraded to the RT-AX86U using same Smart Connect default settings and, initially, all seemed fine. But soon the dropped connections started. I’d reboot and the Sonos system would connect for 10-30 minutes, then lose wifi connection again. Meanwhile, all other wifi devices in my home worked just fine--the Sonos was the only problem child. 

I did all the troubleshooting I could, then called into Sonos support and spent almost 2 hours with a tech rep trying every potential solution possible, but nothing worked. (However: KUDOS to such extraordinary tech support!) He then escalated the issue to an appointment with the Senior Support Team. 

Meanwhile, I went into the router settings once again, looking for anything that might be an issue--even though I had gone through them all with the tech rep, and these were all the same settings that had worked on the AC88U. On a whim, and not expecting it to help, I turned off the QoS feature, which I have set to prioritize bandwidth for media streaming over other tasks. BINGO. That was it. Sonos system has stayed connected ever since. I can’t explain why that would be a problem--I’ve always had the QoS set that way, and with gigabit service, an AX router, a modest load of wifi clients in my apartment and no gaming, there should be bandwidth aplenty. But that was the issue and it’s finally solved. 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

96 replies

Lyricist I
February 23, 2024

Hi everyone! I know the thread has been solved already, but I'd like to share my experience with my Asus GT-AX6000 and the settings that helped me resolve the connection issues.

Perhaps it might benefit someone in the future, especially considering my multiple attempts to seek help from Sonos support (both chat and phone) were unproductive. Initially, they informed me that the product, a SYMFONISK floor lamp, wasn't compatible with Wi-Fi 6 routers, essentially implying it was my problem, and I was on my own.

 

Contributor I
May 13, 2024

I’m putting this on here in case it helps people who might struggle in future. 
I’ve just about managed to set up an IKEA Symfonisk (Gen 2) single speaker with a new wifi network using an ASUS XT9 AiMesh router. 

I was considering launching the Sonos speaker out of the window at one point. The speaker just refused to connect to the Wifi network. 
What seems to have worked is changing the setting “Tri band smart connect” in the Asus app to “5GHZ smart connect”. Then do the set up from factory reset on the Sonos speaker. After that has been set up, I switched it back to “Try band smart connect” and it seems to still work. 

I can’t believe some people suggest buying a different router to sort the problem. It seems to work fine with all other wifi devices - only Sonos have made this such a painful experience. 

Lyricist I
June 15, 2024

Hey All,

 

Everyone that are still having issues, I called support yesterday and they have been super helpful. 

 

They helped me change something and I’m on the latest version of the firmware and have not had disconnections in the last 24 hrs. I have a RT-AX86U on 3.0.0.4.386_41535

 

 

Here is my 2.4GHz settings (I’ll try enable AX mode and Target Time to Wake later on as these were my own changes but I just need some stability right now!):

 

This solved all my problem. Thank you so much. I hope you Sonos can put this in their FAQ. It has been a long search for solution.

Lyricist I
July 18, 2024

In case this helps anyone:

I have two Play:1’s that I purchased back in 2015, as well as Gen1 versions of the Move and the Beam. I found that when I got a new ASUS WiFi7 router, the old Play:1’s were still connecting to WiFi just fine; however, the Beam and Move were not able to.

After a bunch of trial and error, the only thing that I actually needed to change from the defaults on the router was to disable WiFi 7 mode across all bands. This was done through the mobile app, but the setting is available on desktop, as well, as seen in the screenshot below:

My router is the ASUS ROG Rapture GT-BE98 Pro and is running the latest stable Merlin firmware (3006.102.1)

press250
Prodigy III
July 18, 2024

After a bunch of trial and error, the only thing that I actually needed to change from the defaults on the router was to disable WiFi 7 mode across all bands. This was done through the mobile app, but the setting is available on desktop, as well, as seen in the screenshot below:

Hi @ajs81, if you are in the mood for an experiment try enabling Wi-Fi 7 but disabling Multi-Link Operation (MLO). I’d bet that is the specific aspect of Wi-Fi 7 that is troublesome. Which is unfortunate, as MLO is perhaps the most remarkable aspect of Wi-Fi 7. ¯\_(ツ)_/¯

Lyricist I
July 18, 2024

After a bunch of trial and error, the only thing that I actually needed to change from the defaults on the router was to disable WiFi 7 mode across all bands. This was done through the mobile app, but the setting is available on desktop, as well, as seen in the screenshot below:

Hi @ajs81, if you are in the mood for an experiment try enabling Wi-Fi 7 but disabling Multi-Link Operation (MLO). I’d bet that is the specific aspect of Wi-Fi 7 that is troublesome. Which is unfortunate, as MLO is perhaps the most remarkable aspect of Wi-Fi 7. ¯\_(ツ)_/¯

Hey @press250 ! MLO was already disabled on my router, actually, so I don’t think it was that? To be honest, we have no WiFi 7 devices in the house yet, which is why I had MLO disabled to begin with; the WiFi 7 mode toggle was a bit more occluded than the MLO feature, which has its own tab.

I actually only thought to disable it when I saw another post by someone here talking about disabling the ‘ax’ mode on their router. When I looked in my settings through the iOS app UI, I saw “WiFi 7 mode” instead of ‘ax mode’, and it was enabled. So I decided, what the heck, let’s turn it off and see what happens. Sure enough, that fixed the problem.

Now, ideally, I’d be able to enable MLO and WiFi 7 when we do start to get those devices in the house and have all of the SONOS speakers still working. Hopefully by then the issues are solved?

Thanks for replying!