AMP - Sound drops

1 reply
79 views
Translate All

I just added a new AMP to drive two pairs of ceiling speakers. Speakers work after initial setup (first use) of AMP but don’t work afterwards. Any ideas?

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

T

trackerAnswer

Prodigy I

Suggestion: Chop the problem into pieces, amplification faults versus system faults: (1) Does the unit still function computer-wise? Disconnect both pairs of speakers, reboot the device (unplug/replug) and see if your controller can “Play” to the zone, first use and afterwards. (2) If that works, try each pair of speakers separately, same tests as you have been doing? Culprit speaker set A or B, or does it take both? Maybe that will give you an answer, e.g. right speaker wiring, set B, shorted causes amp into protection. For example only...

T

trackerAnswer

Prodigy I

Suggestion: Chop the problem into pieces, amplification faults versus system faults: (1) Does the unit still function computer-wise? Disconnect both pairs of speakers, reboot the device (unplug/replug) and see if your controller can “Play” to the zone, first use and afterwards. (2) If that works, try each pair of speakers separately, same tests as you have been doing? Culprit speaker set A or B, or does it take both? Maybe that will give you an answer, e.g. right speaker wiring, set B, shorted causes amp into protection. For example only...

Translate

Sign up

Login to the community