Components & Architectural

Just as the title says.  I know at one point, long ago I had this working.  I have network drops at my Amp, and ARC and both of my subs.  I want to hard wire all of them into the Ethernet ports and then turn Wifi off on the Arc, Amp, and both Subs.  I was able to get the Wifi turned off on my Arc, and then add my Sub, but now that the sub is added to the Arc I don’t have the option to disable Wifi on the Sub.  And the “Disable Wifi” on the Arc is checked but greyed out.   Can I hard wire everything and turn off Wifi?  If not, what is the point of the Sub even having an Ethernet port?

Hi! i have my turntable → sonos port → five. I am looking to see if there is way to get autoplay to work on source level 8.My thinking is that as long as the turntable is always connected to the port, the port should send a signal to the five as soon as the turntable sends signal to the port, without me having to manually change input in Sonos app to the five.Has anyone got this to work and can help me out? Thanks!

Hi , I have connected the Sonos Port to the enterprise network. However, after connecting the Sonos Port, the corresponding switch port is going into a disabled state. The IT team has raised the following questions: Is the Sonos Port supported on an enterprise network?Does the Sonos Port send or support BPDU? Could you please help us troubleshoot this issue and advise on the required switch configuration or any other network settings that may be needed?

I currently have an amplified turntable that Is connected to a PORT only so I can listen to my LPs through my SONOS speakers I am upgrading my turntable to a non-amplified version. If I upgrade the PORT to an AMP will that still take the input from the Turntable and play through my existing SONOS Speakers?

I have a connect amp (bought in 2016) that I used to have linked to my old hi fi system that linked to my surround sound so that I couldplay vinyl through the surround sound. how do I set this up again as it doesn’t seem to now work. any advice appreciated.

Would there be any benefit in having a 9 band EQ in front of my Sonos?...Definitive Technology powered sub and Definitive Tech Mythos speakers...

I‘m thinking of getting 6 ceiling speakers in my open living/dining/kitchen rooms (total 60m2). However, I‘m not sure how to place them. We have no TV in the living room and generally my wife wants background music. However, I guess a stereo setup if possible would still sound more lively. Please find the layout below and excited to hear your input. my idea so far:- 2 speakers left/right of the sofa, to have nice stereo listening sound in living room- 2 speakers continuing left/right of the dining table (left matching left of living room zone)- 1 speaker (having stereo) in the kitchen (also possible to place 2, but such a small space)or should I put 4 speakers in living room?Many thanks  

I purchased a house with an existing Sonos Amp & speaker system.  There is new wifi service in the house.  How do I connect to the system and start to use it on new wifi?

i want to say as an avid sonos user, where i have 20+ items across multiple locations, the app still has a lot to be desired. just an hour ago, i purchased a brand new sonos amp and attempted to set it up wireless on my network. the app failed to connect to the amp and when it finally did, the amp was added but i got the dreaded message that the amp won’t be found until it is rebooted. multiple reboots and multiple resets and i still couldn’t get the amp to add. only when i physically plugged in an ethernet cable did the amp setup and begin a software upgrade process.this should be a simple basic process to add an item wirelessly. years later this app still struggles to add devices cleanly. all that and i'm not even mentioning the constant software glitches i get trying to use spotify connect with a sonos amp. it connects 1/3 of the time and when it does, i get lucky if a song plays on lossless without stopping somewhere inbetween. note my router is 10 feet from the amp. coincidentally

I have a TV with  beam gen2 with 2 x era 100 as surround speakers, v. happy with this setup.In another room I have my existing stereo which includes a turntable.If I buy a Sonos Port, can I take the line out(tape feed) from my amp into the port and have it stream to the sonos speakers in the other room? I don’t mind if the music just comes out of the beam or just the era 100s 

I just want to access the Sonos 1 App using an old Sonos amp but it keeps reverting to the newer app?

BIG delay sound in mode line in "jack" on PC

My setup is a Beam and Era 300’s ( no sub) in surround sound mode in one room . In other rooms, I have Era 100’s. I woudl like to add an AT-LP3XBT turntable to the mix.I could direct connect the turntable to the Beam, but not the other speakers. Is it possible to:Direct connect the Beam and through it include all of the other speakers? Wirelessly do the same thing? Other alternative?

Have seen numerous comments on setting up a record player but need to add a receiver to the mix for signal boost. I have Kenwood KD-3070 turntable with RCA jacks and a Onkyo TX-SV444 receiver with many input/output ports. See pictures. I am guessing I connect the turntable to receiver (RCA) then receiver to ? to connect to my SONOS 100 speakers. Looking for guidance please with clear non-audiophile description. what connects to what description. I would assume that the connection from the new SONOS device would connect to SONOS speakers via WiFi? Thank You very much for input.

I’m looking for speakers to pair with my Sonos Amp. I’m looking at the Dali Menuet SE, KEF LS50 Meta or B&W 706 s3.  Has anyone tried any of these speakers with a Sonos amp and if so what are their thoughts? Alternatively does anyone have any other speakers they can recommend.FYI I mainly use the amp for my home cinema and listen to music now and again.  I would love to hear people’s thoughts?

Hi. I am looking for some wisdomI have a sonos ONE in the kitchen which i really like. Recently i have done an update as there was some difficulty with the sonos app finding the speaker ( i was still able to mostly find the speaker on spotify)Since then it seems the speaker is invisible to the app and to spotify. My wifi set up is with the BT router in the lounge (other side of an old brick internal wall from the sonos speaker) and a BT wiFi Disc extender in the room above the kitchen to reach the loft office. From my reading the sonos speaker systems are disrupted by having the wifi extender with the same SSID - I have read that you cant change the name of the WiFi disc as it just repeats out the wifi signal. So it seems the option is to Buy a mesh network - £250 ishbut…I was wondering...if sonos use sonosNET can i plug a sound bar into the TV and the wifi router and then the sonos ONE in the kitchen should attach to that network and not the WIFi? This would be cheaper and i would get

Hi! I purchased an Era 100 to line-in for my Audio Technica turntable. I also bought the Sonos USB-C to RCA (3.5) adaptor. Furthermore, I bought a headphone-to-RCA 3.5 (female and male) connector piece off amazon. I tried connecting the Sonos connector to the RCA connector I bought online and the pieces fit together but they are “loose” and no music is playing through the Era 100. Does anyone have any suggestions? I have updated the app and system as well.

Hi,I have a facility with 5 Sonos Ports. each in different floor. each Port connected to dedicated Amp and speakers.All Ports reside on the same network (VLAN)the need is to be able to make the 1st Port determine the music that would be played through the rest 4 Port devices.Is that possible to do through using the Port devices only?thanks 

How to reconnect sonos boost

How many ceiling speakers can I connect to one amp?

Hi, I have a large room (4.5m by 10m with 3m high ceilings) and I want to install in-ceiling, 8 inch Sonos speakers. I would really appreciate advice on whether two pairs would be enough, whether to go with one or two amps and how best to position them. The room will be divided into two zones front of the long side and back of the long side. One half a sitting area and one half a dining area. Thanks!

I recently purchased the in line  3.5mm headphone to usb-c adaptor so could connect my headphones to the Apple 16 iPhone. However, it does not work. The sound just plays on the phone. Have I purchased the wrong adaptor

Dearcan i connect Sonos Zp 100 with Sonos sub If do how does it pl 

I have a Play 5 that I want to connect to my Port (via RCA cable) which is connected to a turntable as the source. Doing so I hear no output from the Play 5 speaker.  Do I need to connect an amplifier between the Port and the Play 5? I am trying to find a use for my Play 5 since it is an older model and not compatible with the newer equipment I have. The Port correctly broadcasts to my other Sonos speakers in the house. I thought I could hardwire the Play 5 and use it as well.  No?