Skip to main content
lulu-lime12
Contributor I
November 26, 2018
Answered

New Sonos Amp with 4 in-wall speakers for surround sound?

  • November 26, 2018
  • 9 replies
  • 2244 views
My family room has 4 in-wall speakers, 2 in front and 2 in back. i would like to make them part of a surround sound system for our TV. Can the new Sonos Amp do this? I've read some articles and specs but I'm not an expert so I'm not clear if this is possible.
    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
    Best answer by Airgetlam
    I think what you really want is a Sonos Amp with 10 (5) speaker posts, so you could have a center speaker as well 🙂 And of course, a port for a SUB. But that's kind of out of Sonos area at that point, and you're talking about a standard A/V receiver.

    But yes, I think you could potentially do what you want with your existing CONNECT:AMP. However, since it doesn't have the necessary 5Ghz antenna in it to receive the surround information, you'd need to still wire it to the Sonos Amp (or have them both wired to your router with ethernet) in order to make that work. But then you could plug in the HDMI-ARC into the Sonos Amp for the front 2 speakers, and have the CONNECT:AMP be powering the rear two speakers.

    9 replies

    Airgetlam
    Airgetlam
    November 26, 2018
    The new Sonos Amp should be able to handle it...well, 2 of them, one for the front pair of speakers, the other for the surround pair of speakers.
    Bruce
      lulu-lime12Author
      Contributor I
      November 26, 2018
      Ugh. 2 of them gets pretty pricey. Wish there was a better way. 😞
      Airgetlam
      Airgetlam
      November 26, 2018
      They're stereo devices. 2 speaker posts. It's hard to get 4 distinct channels out of two speaker posts.
      Bruce
      Airgetlam
      Airgetlam
      November 26, 2018
      Well, technically 4 speaker posts, but you get what I mean.
      Bruce
      lulu-lime12Author
      Contributor I
      November 26, 2018
      Makes sense....thanks for the reply! Now Sonos needs to make a new AMP 2.0 with 4 (8) speaker posts to handle surround. That would do the trick for me.
      lulu-lime12Author
      Contributor I
      November 26, 2018
      Hmmmm...I also havve a Connect:Amp that I can re-purpose. Would it be possible to get the surround sound all linked together with Sonos using 1 Connect:Amp plus one NEW Amp and my 4 in-wall speakers? I am also considering adding the Sonos sub.
        Airgetlam
        AirgetlamAnswer
        November 26, 2018
        I think what you really want is a Sonos Amp with 10 (5) speaker posts, so you could have a center speaker as well 🙂 And of course, a port for a SUB. But that's kind of out of Sonos area at that point, and you're talking about a standard A/V receiver.

        But yes, I think you could potentially do what you want with your existing CONNECT:AMP. However, since it doesn't have the necessary 5Ghz antenna in it to receive the surround information, you'd need to still wire it to the Sonos Amp (or have them both wired to your router with ethernet) in order to make that work. But then you could plug in the HDMI-ARC into the Sonos Amp for the front 2 speakers, and have the CONNECT:AMP be powering the rear two speakers.
        Bruce
        Chris
        Chris
        Lead Maestro
        November 26, 2018
        Airgetlam is correct -

        A Sonos Amp will power front speakers and act as your primary hub for the TV should. You can run a Connect:Amp to the rear speakers but it has to be ethernet wired to the Sonos Amp or your router. Actually this may be easy for you since the wires for rear speakers probably come out same place as the wires for front speakers - so you can have both beside each other and it will work ethernet wired together.

        Having an amp that does all of 5.1 kinda defeats the purpose of Sonos. That would be a wired hometheater receiver.

        You of course can use a hometheater receiver with a connect attached.
        Respect the Queue (2)Move (3)Beam (1) Era100 (2)ARC (1)SonosOne (1)Playbar (4)Play5 (4)Play1 (3)Play3 (1)Port (2)Connect (1) Roam (2) Ace (1)Connect:Amp (4)Sonos Amp (1)Sub + (9) Echo + Smartthings; (2)Play)
        lulu-lime12Author
        Contributor I
        November 27, 2018
        Thank you both...I better understand my options now. I currently use the connect:amp on those 4 wired wall speakers to listen to music. If I setup the way that Chris described, it sounds like I can still use them for music plus for the TV surround sound. All wires terminate in the same location so setup should be easy. Looks like I have a weekend project to try it out. if it works and sounds good (though maybe not a perfect 5.1 system), I’ll be happy.
        Terms & ConditionsAccessibility statement