Components & Architectural

Hi!I have a CD-player Marantz cd6007 and a Sonos Amp; a couple of Bowers&Wilkins speakers and two One. My question is which line in level do you recommend on the amp? 

I have purchased a Connect:Amp from a seller who claims he never activated or used the upgrade option. He says the discount eligibility should transfer to my Sonos account. The device is registered, but the upgrade discount option does not appear. What am I doing wrong?

Okay I'm just letting everybody know I just got off the official Sonos website and Sonos will not hook up to Roku even through the string bars HDMI arc so they're telling me I almost paid $700 for a Sonos subwoofer I'm glad I didn't

New to the product line and trying to get a basic understanding. Here’s what I’d like: a system with a small central amp, left and right passive speakers for stereo music and a center channel for TV (in combination with the L/R). I don’t need a sub. The Amp product has two wired outputs (L/R) so my first question is how would I include the center channel speaker using the Amp?

Trying to get my Sonos port to connect to WiFi. No flashing green light so the app doesn’t see the system. Works if plugged into Ethernet but my hub is in a different room so not ideal. Any ideas?

How can I connect my Connect:AMP with Sonos Outdoor Speakers to a Pioneer DDJ-800 controller?

I have powered speakers connected to my Pioneer DDJ-800. How can I connect a Sonos Sub 4 to the  Pioneer DDJ-800 controller?

Hoping someone can help, I'm having issues watching isp catch up TV and Netflix on my smart tv's, am thinking it might be my gen1 sonos units. I have gigabit Internet up and down from my isp, modem in bridge mode, connected to a separate araknis router. Cisco switch connected to one lan port meshed WiFi on another. From the Cisco switch I have a smaller netgear switch to which one of the smart tvs is connected as well as one of the sonos components, all other sonos 4 sonos components connect on sonos.net. The modem has 4 connections one into my araknis router, 3 of the smart tv's connect direct into the other 3 ports. Running a Control4 smart home which is why I have the current setup Any tips or advice would be most welcome tia

I connected my Port to a Pioneer receiver that is set to - 40db as a start up volume. This because I don't want to shake the hole house when I start the TV for the morning. If I turn the volume up and later switch from Port to TV it will be very Loud if I don't lower the volume first. The problem is that if I set line out to variable it is too low volume to match the other Sonos speakers. Sonos volume set to 18 means that I have to set port at 100. Then I can't rise the volume more.If I set to fixed, it is too loud at - 40db and I also want to adjust the volume from the app so variable would be the best option. It would be nice to be able to adjust the baseline input level for the variable and then save the setting. In that case I can adjust the volume to match the Sonos speakers and then the volume will be equal for both speakers and Port. 

Hello I can’t Connect my routeur Wiim pro plus to my Beam sonos. Any help please?

Hello all,I am considering adding a vinyl Platine to use it with the Sonos speakers that I have: 2 One SLs, 1 Beam and 1 Sub Mini. Could somebody tell me what additional equipment (Sonos Amp?)  I’d need to do so and what Platine works fine with the Sonos system ?Thanks,Andres

There were rumors on the release of Sonos Premiere, the multi-zone Sonos amplifier to be released in H2 2024. Does any one have information on this?  Sonos Port is also ageing and an update with possible Atmos, Hi-fi support would be appealing.

So I bought 2 sub minis and I just read that you can’t connect 2 sub minis is that true and is there any way I can ?

Is it possible to stream music videos through the Port when using Airplay.Currently using iTunes to through my phone  to a Port and playing music through my hifii. I also have a Samsung frame TV and wondered on how I could stream the music videos to that whilst still playing through the hifi. I’m guessing it isn’t possible using the Port? 

Hello to allCan we connect a Sub (Gen3) to a play:5 (Gen2)? Thanks

I’m moving from my current house which has a number of ceiling speakers connected to Sonos Connect Amps, which I intend to leave for the new owner. How do I leave these products and how does the new owner connect to them?

I need advice for configuration of my existing stereo system (Pinell 701) and Sonos Beam and Sub. The stereo has a built in amp and an RCA line out. Can I connect it, via Sonos Port’s line in, to the Sonos Beam and Sub to stream stereo?

Hi there,I have exactly the same feature request(s) as here:I have a projector setup with a retractable screen in front of a window, so a Sonos soundbar was never going to work for me. However I like the Sonos ecosystem and wanted a speaker setup for 3 primary use cases:good quality speakers for music could also be used for a home theatre setup could be used for a voice assistant I had the idea to use 2x Era 100s as a stereo pair for my main speakers. But to get my different AV sources passing audio to them via the projector, I thought using an Amp with the ARC was the way to go. Finally I added a sub mini into the mix for good measure.Before I committed to the purchase I phoned Sonos technical support to see if this setup would work: “sure” they said, “just make sure your projector has ARC”.Unfortunately after purchasing I realised their response was a bit misleading, as I found out to my detriment that the Amp wouldn’t pair the Era 100s as front speakers, only rear channels. Technica

Is there a difference in sound quality between port and amp when using a turntable and only Sonos speakers?  

Hi I have moved into  a new house, which has speakers in all the rooms all wired up and ready to go.  If i buy a Sonos Bridge, will this enable me to stream my music from apple?  i realise it would be the sqame music in every room.  Do i need to buy anything else to get up and running? Thank you.

Hi,My question was asked per guidance from Sonos on stackoverflow. The question is specifically about the SMAPI, and if the Endpoint URL *must* be public. If so, Why? It doesn’t make sense and is a poor design choice for integrations.The question is asked here in more detail - please can somebody answer https://stackoverflow.com/questions/79162083/sonos-smapi-endpoint-can-this-be-decided-at-runtime

i’ve just bought a new home and there are some existing outside speakers, can they be used with my sonos speakersnby adding thensonos amp?

I currently have a non-sonos receiver running surround in my living room.  Am I able to connect any of the sonos subwoofers to this system and have it work with both TV and music?  I feel like I tried to do this initially and it didn't work.

Hi! Is there any way to adjust the input gain for HDMI on the Sonos Amp?I have the problem that the input from the TV is relatively lower than when streaming music. For music I set the volume to maybe 25-30 at normal listening level, but for TV I need to crank it up to almost 50.If I first  watch TV and then switch to Spotify or any other music streaming service, I will get a heart attack if I forget to first adjust the volume down. 😅to sort this out I would either need the possibility to set hdmi input gain or set a default volume for hdmi and streaming respectively, that is applied/reset every time I switch input source.

Hi - I am trying to setup a new PORT to my Denon stereo system that consists of a receiver, CD player, and Tape player - I want to connect so anything I play on the CD/Tape players will play on my Sonos speakers throughout my house. I looked thru the questions here, but honestly I can't figure it out - any help would be appreciate. Thanks!