Components & Architectural

Hi. Just looking for a 35cm or 50cm white power lead for my Five's. Everything seems to refer to Play 5's. Are they the same ? Thank you. 

I would like to stream music into my receivers (I have 2) - will a splitter on 1 Port work for 2 Receivers? 

Bonjourj’utilse actuellement chez moi un SONOS one en partage de connexion avec mon PC (je n’ai pas de box internet)Je ne sais plus comment j’ai réussi a faire fonctionner ma sonos one comme ca (ca doit être l’âge) mais ca marche !j’ai acquis récemment  un sonos port pour écouter mes vinyles , mais je n’arrive pas à le connecter avec le sonos one…je suis donc preneur d’un conseil pour réaliser cette configuration si elle est possible Merci par avance pour vos réponse  

Willing to buy Sony Speakers #SRS-RA3000 which has Voice assistant and Bluetooth and Wifi (compatible with Google Home group-multi room).How do I know if it will be compatible with my Sonos AMP?https://electronics.sony.com/audio/speakers/360-reality-audio/p/srsra3000-b

Hey everyone.  I am brand spanking new to using any Sonia components at all.  My father has his entire home, including a hifi Klipsch based HT set up with a connect and THREE outdoor zones (maybe 9 zones total. He’s AALLLLL in!) connected so I am not new to using Sonos.  Well, I’ve finally relented on my passion for only using wired hi-fi set ups exclusively.   I would now like to use a Connect gen 2 that i will be buying from an eBay seller to save a bit since I’m also buying 2-3 Sonos Ones.  MY QUESTION IS:  Does a Connect gen 2 work with Sonos’s most current app/ecosystem??Will it work with the S2 app??

Hi to communityI know that would be lame question but I was not able to find the answer in manual:((I’ve just got sonos amp today and as it works, streaming music, similar to other sonos parts I have, I’m wonder if touch buttons on the front are backlighted or not ? thx W 

Hi there! I have multiple Sonos amps in my house, one of which is connected to a TV via HDMI arc. I often play audio via Airplay 2 across the whole house, but then when someone turns on the TV in the living room it auto disconnects Airplay in the rest of the house. How can I keep the Music playing and Airplay connected in the rest of the house when someone turns on the TV? 

Hi can you pair a turntable to 2 sonos 5’s ?, I know you have to wire 1 in , but will it then play on both speakers????

If i hook up the port to my reciever and wired system will i also be able to use the arc and the sub to play music?  Essentially I’d like all speakers to fire as I stream to the port. Two front wired and two back wired along with ARC and Sub. Can that be done?

Hoping someone could advise on what the depth (front to back) of the flat portion of the Sonos Arc is? Thank you. 

Hi. Im trying to use my Sonos Port with Denon Amp. (DENON DRA-800H) with no luck. There is no sound from input (output works). I’ve connected Port using RCA to CD 2 IN port, no sound. Then I’ve used COAX cable to connect to CD IN port, no sound as well. Im sure that Port is streaming, because when I connect it to Phono input, the sound plays as it should. Any help help? 

Can we please get back the ability to adjust the crossover on the sub. Why was that removed it was a great feature and made the system sound so much better.   Thanks 

I wanna buy a turn table to play vinyl via a preamp on two play 5 (2 nd gen) speakers set on stereo and I was wondering if the line in mode keep the sound analog 🤔

G'day Community. Hope all are well! My first Sonos community post, after setting up my Arc, One SLs (surrounds) and Gen 3 Sub, which all has been Trueplay tuned and sounds pretty mint, so am really pleased.  No niggles, really impressed by the quality of the sound for movies and music, and music's where my query's centred, specifically Deezer (Premium).My question,  which may have been asked a million times (apols) - How can I tell if the track I'm streaming is high definition audio - I did look within Support and the community, and found the below in Sonos support, but this does not seem to apply to either the Sonos S2 app or the Deezer app (Android) and the following options are nowhere to be found:"How can I tell if the track I'm streaming is high definition audio (FLAC)?Select Info & Options > Track Format. You’ll see the format here (FLAC or MP3)"Ok, so, I'm aware (thanks to the community) that I can verify HDMI input from my tv/xbox e.g. Atmos by checking Sonos App when pl

Hi,Looking to use the 12v trigger on my new Sonos Port to turn on my receiver when I start playing music through the port. I do not have an input on my Pioneer Receiver to connect to the port. Is there an adaptor or additional component like this in North America that will work? https://www.audiophonics.fr/en/diy-kits-and-boards/audiophonics-trigger-12v-230v-slave-power-supply-device-p-10661.html

What happens to components that are “upgraded”? I notice people are selling them 2nd hand, but is it even possible to connect an upgraded component to a S1-system? I thought they would be rendered useless, as CR100 a few years ago.Or will they work on every other system but mine since I made the upgrade?Or will they still work, even on my own system if S1?There was a long text if I clicked “upgraded” but nothing on this as far as I could tell so I clicked cancel again.

Hi there,I’ve read many of the posts on using Port for connecting turntables and older systems, but I’m still not 100% on the right solution.I’m basically looking to add a couple Sonos Ones and a Beam to my TV/Turntable/Apple TV/Nintendo to Receiver set up. I want the option to have everything that’s currently connected to my receiver play through my wired speakers/Subwoofer as well as the new Ones and Beam.  - Do I need to run the turntable into the Port, wouldn’t it make sense to keep the turntable connected to my receiver and somehow line-out everything in the receiver to the Port? -  I’d still switch the receivers source input depending on what device I want to use (turntable, apple tv, nintendo) correct? - And just to mention, I’m currently using an older Sony Str-dh540 (image below) but planning to upgrade that eventually. Is there anything I should be considering when searching for a new receiver for a situation like this? I thought Sonos AMP might be an option, but my TV only h

I’m on the verge of forking out some cash for premium wired over-ears. Currently driving a pair of Wharfedale EVO 4.1 with my Sonos Amp and wondering how to use the Amp as source for my headphones to play. I understand the Amp does not have a headphone jack? Do I need to buy a headphone amplifier the will connect to the Amp and then send signal to the headphones?If the above is possible, and I connect the headphone amp to the Sonos Amp and then to the headphones, should I stream or play anything through the Amp, won’t the sound playback go to both the Wharfedale speakers AND the headphones? How could I have speakers AND headphones connected to Amp and decide which will be playing?Thank you all.

I am doing an outdoor sound upgrade and running four Sonos amps to 8 Klipsch AW-650 speakers to create 4 zones.  One question - The Sonos Amp is rated at 125w but my speakers (8ohm) are rated for 85w RMS and 340 Peak.   Should I be using Volume Control to protect the speakers? Or is the power close enough to not be a big deal?  Any idea what Volume Control % to use?  Thanks! 

Hello,Can someone advise if the Sonos Amp will power the Marantz PM6005 Speakers sufficiently? I just want to check the Amp will work as intended with these speakers before I purchase it.Thanks Jonathan

Hi Sonos friends. I am considering connecting a Sonos connect gen2 or port to my Control4 ea-3 to stream music from my Control4 tidal to my Sonos arc. this way I add an extra room to my Control4 ecosystem. Has anyone seen this done before and am I right in assuming that I can stream (no hard connection ) from the connect or port to the arc?

My current layout is I have a Sonos Amp with 4 in wall speakers 1 left front, 1 left rear, 1 right front, 1 right rear.  The left front and rear are on the left channel and the right front and rear are on the right channel.  The amp is connected to my TV via HDMI ARC and the tv controls the volume of the Amp.  My question is if I purchase a Sonos Beam Gen 2, is it possible to connect the Beam to the Amp to “act” as a center channel?  The tv currently controls the volume on the Amp, I would like the Amp and Beam to both work with the volume control of the tv.  Is this possible?  If so how would I connect this all together?  My TV does not have two HDMI ARC outputs it also has an optical out but I do not believe this works if the output is already designated to the HDMI ARC.  I don’t need the Amp to power the Beam, I would just like it to act as a center channel.  

hi there. For my husband’s 50th I want to buy him a turntable to connect to our current Sonos system.  I don’t want to spend so much money so thinking of buying a non-Sonos turntable.But when I’ve read the Sonos blogs, if we have a turntable then it says we need a Play5 Speaker - does anyone know if this is correct? We only have a Play 3 speaker, a Beam, 3 Play 1’s and a Roam.  

Hi new to the communityi have a Russ sound amplifier system with 6 zones in house. I use older white Sonos Connect device to pipe music to each zone. Can I use the new Sonos Connect Amp to the Russ Sound system to get that additional wattage and better quality or just go with new Sonos Connect.  Thanks 

I am a new Sonos user. I have 4 B&W in-ceiling speakers and a Sonos amp. Am I able to add the Sonos sub without adding another amp?  Thanks in advance!