Skip to main content
zakboca
Contributor I
December 4, 2015
Question

Flexson Vinylplay

  • December 4, 2015
  • 15 replies
  • 1802 views
Hi there- I just got a vinyplay, which hooks up to my sonos connect via audio cables (red/white). I also have two play 1s in one room and a subwoofer. For some reason, I can only get one of the play 1s to play. The other play 1 just has loud noise coming out of it, so I've unplugged the red cable entirely on the record player so to not send anything through to it. Any ideas? Thanks

Zak
    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

    15 replies

    NoBoB
    NoBoB
    December 4, 2015
    If you swap the red/white connection at the Connect, does the noise move to the other speaker?
    zakbocaAuthor
    Contributor I
    December 4, 2015
    Yes it does move to the other speaker. Also, I noticed that the subwooder is in fact working. Thanks for the reply.
    The LHC
    December 4, 2015
    Do you have an amp and speakers connected to the connect? Or alternatively can you plugged the vinylplay directly into another amplifier to take the connect out of the loop? It sounds like a faulty TT given the problem moves when you switch the cable around.
    zakbocaAuthor
    Contributor I
    December 4, 2015
    Well the sub and speakers are connected wirelessly to the connect (im assuming?). The sub continues to play, just not the one speaker. Is there an additional amp that I could add in to the mix or osmething?
    The LHC
    December 4, 2015
    Well the sub and speakers are connected wirelessly to the connect (im assuming?). The sub continues to play, just not the one speaker. Is there an additional amp that I could add in to the mix or osmething?

    Err, no, I meant do you have another system you could plug the turntable into in order to test it outside of a Sonos system?

    Either way I don't think it matters , it sounds very much like the output on the Vinylplay is knackered, you'll need to return it to wherever you got it from.
    zakbocaAuthor
    Contributor I
    December 4, 2015
    I dont. I think that I'll try buying an optical cable and using that. Any reason why that may not work? Thanks
    Belly M
    Belly M
    December 4, 2015
    I dont. I think that I'll try buying an optical cable and using that. Any reason why that may not work? Thanks

    There in NO optical input on the connect.
    zakbocaAuthor
    Contributor I
    December 4, 2015
    Ah dang.. ok. So that must be the out that I see on there?

    Does it sound like the red output on the record player is damaged?
    ratty
    ratty
    December 4, 2015
    The red (right) channel from the TT sounds defective. The SUB obviously works when just one (white) channel is connected, because it reproduces the bass frequencies from both channels.
    shainmugen
    shainmugen
    Contributor I
    October 28, 2016
    Hi there,
    Sorry if I hijack this thread. And this is my first post. I am new to Sonos. Been lurking here for a while and have read some informational stuffs.
    Not sure if this question been post before, please bear with me.
    I have ordered a Flexson VinlyPlay and its being shipped. I have two Play5 paired.
    My question is if I connect the turntable to one of the Play5 via the Line in, will the sound comes out from one speaker or both?
    Many thanks in advance 🙂
    |ARC+2S1+SUB|; |2P5+Vinyl|; |PB+2P3+SUB|; |BEAM+2P1+SUB|; |2P1|
    Show more replies
    Terms & ConditionsAccessibility statement