Connect Audio line out to Bose media centre not working

Forum|Forum|9 years ago
November 6, 2016
13 replies
830 views

I have a Connect working well on two Play 5 speakers using the Audio line out from my Bose MC1 Media Centre. The play 5 speakers are in a seperate room to the Bose system (with its Bose speakers)
I would like to now add the ability to play the streamed Sonos content through the Bose system, which I assumed would be a simple task of using the Sonos RCA line out as an input into a Bose audio input. Then selecting that input on the Bose system should work - it didn't !
I have tried disconnecting the Audio line in to the Connect in case of any conflict, but this made no difference.
Any suggestions appreciated.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

K

Kumar

I have tried disconnecting the Audio line in to the Connect in case of any conflict

That should not be necessary. To establish that the Connect is doing its thing, if you group any of the 5 units with it when you are trying to also get the Bose speakers to play the streamed content, is the 5 unit playing it?

GrahamWBAuthor

Contributor I

Yes the play 5 speakers are playing the streamed music

K

Kumar

Given that the 5 unit is playing, check/eliminate a problem with jacks/cable. If the Bose has a digital input, a quick way to make a full change is to use the digital output of the Connect, the appropriate cable, and the digital input on the Bose and select that for play.
If the Bose does not have a digital input, try the same cable into another input on the Bose -except for any labelled phono or digital, all work the same way. Next step would be to try a different RCA cable.

K

Kumar

And I assume you have checked that the Bose amp isn't blown and is driving the speakers when played independently!

GrahamWBAuthor

Contributor I

Thanksi Kumar for your ur help
The Bose amp is working fine, the only input not functioning is the sonos.
I might try the digital input, I have tried other rca leads and other input analogue ports into the Bose, but same problem. I was suspecting the sonos rca output maybe failing. Any way of testing it is working ie with meter ?

T

The LHC

Have you turned the volume on the Connect up?

K

Kumar

The max signal voltage it puts out is 2 volts and I am sure a meter can be handy to test that it is working if you know how to use one of the right sensitivity - I don't!

GrahamWBAuthor

Contributor I

I wound the volume up to max on both sonos and Bose- no change
I would este dyed voltage 0 VDC - feels like the problem. I will try the digital lead, but I will have to buy one.