Skip to main content
Arnie328
Arnie328
Avid Contributor III
Jan 18, 2019 4:49 PM UTC
Answered

Connect Amp Subwoofer out

Right now I'm just using speaker wire to include my subwoofer in my Connect Amp setup. I go from the Connect Amp, loop thru the subwoofer and then to my speakers. But I would like to take advantage of the subwoofer out connection on the Connect Amp. Do I just go RCA from the connect amp to the LINE in on the subwoofer? No speaker cable involved? Just go to the Left LINE in? I have an Acoustic Research S112PS. Thanks for your help. - Arnie
    This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
    ratty
    rattyAnswer
    Jan 18, 2019 5:02 PM UTC
    Correct. Wire the Connect:Amp subwoofer output to one of the RCA preamp-level inputs on the sub.

    Set the sub's low-pass filter to its highest frequency. The C:A will apply its own crossover.

    You'd obviously wire your main speakers directly to the C:A.
    View in thread

    2 replies

    ratty
    rattyAnswer
    Jan 18, 2019 5:02 PM UTC
    Correct. Wire the Connect:Amp subwoofer output to one of the RCA preamp-level inputs on the sub.

    Set the sub's low-pass filter to its highest frequency. The C:A will apply its own crossover.

    You'd obviously wire your main speakers directly to the C:A.
    Translate
      Arnie328
      Arnie328Author
      Avid Contributor III
      Jan 18, 2019 5:35 PM UTC
      Excellent. Thanks so much Ratty.
      Translate
      Terms & ConditionsAccessibility statement