Skip to main content
lefty23
Contributor II
December 30, 2018
Answered

Alexa plays one song then stops with Amazon music

  • December 30, 2018
  • 1 reply
  • 33652 views
I have a multi speaker setup (PlayBase, Sub, two Sonos Ones). Voice commands to Alexa work perfectly. I can request a playlist, artist, song, or station from Amazon music and it will play. The problem is that it stops after one song.

I've read previous threads regarding this issue. So, I removed the skill and re-added. I've removed the surrounds from the group and re-added. No change. The PlayBase is wired in as is the sub.

Any thoughts?
      This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
      Best answer by UKMedia
      Hi

      This is normally an issue with Amazon authorisation. The steps below detail my standard Alexa troubleshooting guide, Section 2 is the most likely cause:

      Sorry for the long post but this type of issue is normally down to one of three things:

      1/ Duplicate device names - Alexa prefers that names for Devices, Groups and Scenes are unique,
      1.1/ Please open up the Alexa App>Smart Home and make a note of any duplicate device names;
      1.2/ You can then change them in the source app. e.g. Use the Sonos App to change the name of Sonos players. (I personally use the naming standard Room Name + Device type. e.g. Kitchen Sonos, Kitchen Echo Dot, Lounge Sonos, etc)
      1.3/ Once you have changed any duplicate names then please open the Alexa App on a Browser (https://alexa.amazon.co.uk or https://alexa.amazon.com)>Smart Home>Devices and select 'Forget All' followed by 'Discover'. NOTE: This will remove ALL Actions from ALL Alexa Routines! (Only the Browser version has this functionality.)

      2/ Some form of Account Linking or Authorisation has not completed successfully. There are a number of causes for this and it's best to try these steps 1 at a time and test before moving on to the next step if the problem persists:
      2.1/ Open the Alexa App>Skills>Your Skills>Sonos and 'Disable' followed by 'Enable';
      2.2/ Ensure that you don't have multiple Amazon accounts logged into different Apps on your device, as this can confuse the Amazon Authorisation. If yes, then please log out of the other accounts and then complete step 2.1 again;
      2.3/ If the problem still persists, please logout of all Amazon accounts then select the Alexa App>Skills>Your Skills>Sonos and 'Disable. Now power down all Sonos devices for 10 secs, allowing for any wired devices to boot before booting the remaining Sonos players. Now log back into the Alexa App>Skills>Sonos and 'Enable'

      3/ If the problem persists then an entire reset of the Authorisation & Account Linking process is required:
      3.1/ In the Alexa app, select Skills>Your Skills>Sonos and then 'Disable';
      3.2 In the Alexa app (Browser version), select 'Smart Home>Devices'. Now select 'Forget All' at the bottom of the screen;
      3.3/ In the Sonos app (Android or iOS), select Settings>Room Settings and for each of the Sonos One's sign into 'Voice Services' and select 'Remove Amazon Alexa from this Room';
      3.4/ If you have any wired Sonos devices, please power down for 10 secs and then switch on and wait for it to boot;
      3.5/ Now power down all other Sonos Players for 10 secs then switch them back on and wait for them to boot;
      3.6/ In the Sonos app, Select Manage>Add a player or sub' and add the Sonos One's again. This will complete the set-up process again;
      3.7/ In the Alexa app, select Skills>Your Skills and ensure the Sonos skill is 'Enabled', if not please 'Enable';
      3.8/ In the Alexa app , select Smart Home>Devices>Discover. Ensure that your Sonos One's are displayed correctly and not shown as 'Off Line'.
      3.9/ Also check one last time that there are no devices with the same name. Remember, if there is a need to rename any then you'll need to select 'Discover' again.

      Let us know how you get on.

      1 reply

      UKMedia
      UKMediaAnswer
      December 31, 2018
      Hi

      This is normally an issue with Amazon authorisation. The steps below detail my standard Alexa troubleshooting guide, Section 2 is the most likely cause:

      Sorry for the long post but this type of issue is normally down to one of three things:

      1/ Duplicate device names - Alexa prefers that names for Devices, Groups and Scenes are unique,
      1.1/ Please open up the Alexa App>Smart Home and make a note of any duplicate device names;
      1.2/ You can then change them in the source app. e.g. Use the Sonos App to change the name of Sonos players. (I personally use the naming standard Room Name + Device type. e.g. Kitchen Sonos, Kitchen Echo Dot, Lounge Sonos, etc)
      1.3/ Once you have changed any duplicate names then please open the Alexa App on a Browser (https://alexa.amazon.co.uk or https://alexa.amazon.com)>Smart Home>Devices and select 'Forget All' followed by 'Discover'. NOTE: This will remove ALL Actions from ALL Alexa Routines! (Only the Browser version has this functionality.)

      2/ Some form of Account Linking or Authorisation has not completed successfully. There are a number of causes for this and it's best to try these steps 1 at a time and test before moving on to the next step if the problem persists:
      2.1/ Open the Alexa App>Skills>Your Skills>Sonos and 'Disable' followed by 'Enable';
      2.2/ Ensure that you don't have multiple Amazon accounts logged into different Apps on your device, as this can confuse the Amazon Authorisation. If yes, then please log out of the other accounts and then complete step 2.1 again;
      2.3/ If the problem still persists, please logout of all Amazon accounts then select the Alexa App>Skills>Your Skills>Sonos and 'Disable. Now power down all Sonos devices for 10 secs, allowing for any wired devices to boot before booting the remaining Sonos players. Now log back into the Alexa App>Skills>Sonos and 'Enable'

      3/ If the problem persists then an entire reset of the Authorisation & Account Linking process is required:
      3.1/ In the Alexa app, select Skills>Your Skills>Sonos and then 'Disable';
      3.2 In the Alexa app (Browser version), select 'Smart Home>Devices'. Now select 'Forget All' at the bottom of the screen;
      3.3/ In the Sonos app (Android or iOS), select Settings>Room Settings and for each of the Sonos One's sign into 'Voice Services' and select 'Remove Amazon Alexa from this Room';
      3.4/ If you have any wired Sonos devices, please power down for 10 secs and then switch on and wait for it to boot;
      3.5/ Now power down all other Sonos Players for 10 secs then switch them back on and wait for them to boot;
      3.6/ In the Sonos app, Select Manage>Add a player or sub' and add the Sonos One's again. This will complete the set-up process again;
      3.7/ In the Alexa app, select Skills>Your Skills and ensure the Sonos skill is 'Enabled', if not please 'Enable';
      3.8/ In the Alexa app , select Smart Home>Devices>Discover. Ensure that your Sonos One's are displayed correctly and not shown as 'Off Line'.
      3.9/ Also check one last time that there are no devices with the same name. Remember, if there is a need to rename any then you'll need to select 'Discover' again.

      Let us know how you get on.
      Remember: Sometimes Red Wine helps :)
      Terms & ConditionsAccessibility statement