Skip to main content
Contributor I
Jun 20, 2023 2:37 PM UTC
Answered

Speakers don't work since adding a network switch

Have 2 Sonos Ones that have worked well wirelessly for years. I have some devices in my house I prefer to hardwire and need more ports so added a network switch to the router. Now the speakers don’t work/connect. The Sonos speakers are the only wireless devices in the house that don’t work now. Spent over an hour on phone with Sonos, restarting, removing, reconnecting, etc. No success and they were unable to help me. Said to call my internet provider for help configuring the router settings (who wants to charge for support with no guarantee of success).

Any suggestions for how to configure router settings?

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Ken_Griffiths
Jun 22, 2023 12:10 AM UTC

@th5467,
Here are the ‘general’ STP settings required for a managed switch to work with Sonos and the STP Interface Settings (for every port connected to a Sonos product) to eliminate any loops…

https://support.sonos.com/en-us/article/configure-stp-settings-to-work-with-sonos

Personally speaking, I would return the switch too and perhaps just go with an ‘unmanaged’ Netgear switch instead, but, if required, maybe see if the settings suggested will work for you.

Hope the link assists.

Edit: I would also check and if enabled, disable the switches built-in DHCP server, as that maybe at the root of your problem here too.

14 replies

buzz
Grand Maestro
Jun 21, 2023 5:20 PM UTC

See page 51 and make sure that IGMP snooping is enabled.

Translate
controlav
Lead Maestro
Jun 21, 2023 11:49 PM UTC

Nest, Ring, desktop computer, TV, etc. all seem to work fine. Sonos is the only issue.

Sonos is likely the only one that requires realtime inter-device communications on your local network.

Translate
Author of the leading independent Sonos apps for Android, MacOS, iOS, Windows and Xbox.
Ken_Griffiths
Jun 22, 2023 12:10 AM UTC

@th5467,
Here are the ‘general’ STP settings required for a managed switch to work with Sonos and the STP Interface Settings (for every port connected to a Sonos product) to eliminate any loops…

https://support.sonos.com/en-us/article/configure-stp-settings-to-work-with-sonos

Personally speaking, I would return the switch too and perhaps just go with an ‘unmanaged’ Netgear switch instead, but, if required, maybe see if the settings suggested will work for you.

Hope the link assists.

Edit: I would also check and if enabled, disable the switches built-in DHCP server, as that maybe at the root of your problem here too.

Translate
controlav
Lead Maestro
Jun 22, 2023 12:53 PM UTC

@th5467,

Edit: I would also check and if enabled, disable the switches built-in DHCP server, as that maybe at the root of your problem here too.

The switch has a built-in DHCP server? OMG why?? Yeah, replacing this with an unmanaged switch is the best fix.

Translate
Author of the leading independent Sonos apps for Android, MacOS, iOS, Windows and Xbox.